Cavemanwf Posted June 27, 2020 Share Posted June 27, 2020 I’m trying to setup site plan but the 5 format options don’t seem compatible with the site plan supplied ( refer attachment ) if it helps it’s located in Australia, Queensland please help advise Link to comment Share on other sites More sharing options...
Kbird1 Posted June 27, 2020 Share Posted June 27, 2020 looks like you may need to find a Converter for the Southern Hemispere , the one linked is an example only, is for Northern Hemp. https://www.engineeringtoolbox.com/utm-latitude-longitude-d_1370.html there are a couple of Aussies on the Forum like GlennW , he maybe of more help. @glennw Link to comment Share on other sites More sharing options...
Alaskan_Son Posted June 28, 2020 Share Posted June 28, 2020 There should be no conversions necessary. Easting and Northing are essentially just the linear equivalent of their globular longitude and latitude cousins. Because they're linear all you need to do is enter those numbers using something like the input line tool. Here's a quick complimentary video and the resulting plan file... https://youtu.be/iAPDYWGosPA Plot plan.plan 1 Link to comment Share on other sites More sharing options...
glennw Posted June 28, 2020 Share Posted June 28, 2020 You will need to scale the mm drawing by 1000, not 100 to get the correct size in metres. 1 Link to comment Share on other sites More sharing options...
Alaskan_Son Posted June 28, 2020 Share Posted June 28, 2020 Just now, glennw said: You will need to scale the mm drawing by 1000, not 100 to get the correct size in metres. Oops. My bad Boy do I feel silly. Thanks Glenn. I like to think if it was more than a quick example, I would have thought about it a little more and made sure I got it right...I guess I'll never know though. Link to comment Share on other sites More sharing options...
glennw Posted June 28, 2020 Share Posted June 28, 2020 Or, even easier, just draw it in metres in the first place. Northings and eastings are specified in metres as standard. Link to comment Share on other sites More sharing options...
Kbird1 Posted June 28, 2020 Share Posted June 28, 2020 12 minutes ago, glennw said: You will need to scale the mm drawing by 1000, not 100 to get the correct size in metres. Beaten to it.... yes rather small lot currently at 8m x 6.6m but thanks for the Vid. we don't use Northing and Eastings here..... Maybe worth moving to the Tips section though since I think that is the 1st time I have seen this asked here... Turning on Line Lengths and Angles helps for Plot Plans too. M. Link to comment Share on other sites More sharing options...
Alaskan_Son Posted June 28, 2020 Share Posted June 28, 2020 Just now, glennw said: Or, even easier, just draw it in metres in the first place. Northings and eastings are specified in metres as standard. I thought I mentioned it in the video, maybe not, but my decision to draw in mm was very deliberate. It just gets a lot more complicated in Chief to deal with objects that are drawn too far out in space. Chief seems to handle it just fine up to a certain point, but anything beyond that point becomes a lot more complicated. I'm never quite sure where that line is and didn't want to risk it since those numbers seemed so big. If you end up testing it with direct meter input, let me know if it's problematic or not. I really don't know, and I'm curious...just not curious enough to draw it again. Link to comment Share on other sites More sharing options...
Cavemanwf Posted June 28, 2020 Author Share Posted June 28, 2020 3 hours ago, Alaskan_Son said: There should be no conversions necessary. Easting and Northing are essentially just the linear equivalent of their globular longitude and latitude cousins. Because they're linear all you need to do is enter those numbers using something like the input line tool. Here's a quick complimentary video and the resulting plan file... https://youtu.be/iAPDYWGosPA Plot plan.plan Thx so much it was the return point that portly threw me but you helped heaps once again thx Link to comment Share on other sites More sharing options...
cavemanwfire Posted Tuesday at 01:01 AM Share Posted Tuesday at 01:01 AM back again with same issue for same block had major health issues and starting again from scratch since my chief license has expired, i'm chasing for someone to do: a) the block from scratch, showing the approved retaining wall positioned on the block, the overall diamentions of the block + diamentions of each key position point ie; retaining wall and sewerage. b) with services shown on a second copy and c) contours on a third copy, taking into account the retaining wall elevations and as if the retaining wall and fill are completed. please message me the costs to do such an endevour. cheers in advance can supply the retaining wall, contours and service locations attached is the survey plan and retaining wall SITE PLAN inc Conours & Underground Connections.pdf Retaining Wall - Approved Plans.pdf Link to comment Share on other sites More sharing options...
mthd97 Posted Tuesday at 03:21 AM Share Posted Tuesday at 03:21 AM Hi @cavemanwfire, You can rent CA for a month or so to finish these plans. Plus your surveyor or your engineer can email DWG files of those drawings and you could easily import them into CA to finish them off. It wouldn’t take you very long to do as you are already very familiar with the work needed to be done. Hope you are doing well now. Link to comment Share on other sites More sharing options...
cavemanwfire Posted yesterday at 12:24 AM Share Posted yesterday at 12:24 AM (edited) @glennw FINAL SITE PLAN.pdf @Renerabbitt SITE PLAN inc Conours & Underground Connections.pdf @Alaskan_Son Retaining Wall - Approved Plans.pdf @Kbird1 Edited 22 hours ago by cavemanwfire add user & 3x attachmenst Link to comment Share on other sites More sharing options...
Renerabbitt Posted 9 hours ago Share Posted 9 hours ago 17 hours ago, cavemanwfire said: @Renerabbitt Took a glance at this, and am a little unclear as to what the deliverable is. This seems like just a straight CAD job that an autocad user could do. Are you looking for 3d topography and retention? Do you have this survey in a dwg format? Marking up a dwg survey is easy enough, building 3d topography with retaining walls is more work, what is the full scope of this job. the block from scratch-- Do you mean modeling the entire neighborhood block(not shown in PDF's) with neighboring parcels? services shown on a second copy--second copy of what exactly? second plan file, or put on an isolated layer or? third copy---so you need a before and after plan file, 3d? one without the retaining wall and one with the retaining wall? deliverable is just a pdf? Link to comment Share on other sites More sharing options...
cavemanwfire Posted 4 hours ago Share Posted 4 hours ago @Renerabbitt now dwg file - it was lost when business sold no 3D required, just basic drawings ( for you anyways ) attached is a sketch of what i\m chasing wanting it in chief format, as i can still access chief but cant modify in chief desired plans.pdf Link to comment Share on other sites More sharing options...
mthd97 Posted 1 hour ago Share Posted 1 hour ago Hi @cavemanwfire, Apart from what @Renerabbitthas outlined. From what you have told me in that you need to have the contours extend 5m beyond the site boundary and that this is a plan for a subdivision. The only person qualified to submit for a subdivision in Australia, is a registered surveyor as you would be well aware of. It would also be quite difficult to extract the extended contours from google maps as well that go beyond your boundaries. It can be done though but this type of work is familiar to a surveyor normally. Like Rene says, this is basically 2D CAD work and can even be done by pdf editing software. Or we can import the drawings and trace the contours but when they go outside the boundary by 5m, this is where the difficulty lies. I think it might be wise to bite the bullet and DIY it . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now