HumbleChief Posted July 18, 2016 Share Posted July 18, 2016 I've got an interior space that is giving me fits and would appreciate another look at the plan and design approach. As can be seen from the pic below there is a lot of cut up sections to the space and each approach (attic wall, pass throughs, doorways) has failed on some level. Curious as to what approach you might take to achieve the pictured results. Thanks Here's the plan WALLS 1.plan Link to comment Share on other sites More sharing options...
DavidJames Posted July 18, 2016 Share Posted July 18, 2016 A bit of a challenge, but here's my attempt: Link to comment Share on other sites More sharing options...
ShaneK Posted July 18, 2016 Share Posted July 18, 2016 Landing and 2 poly solids Link to comment Share on other sites More sharing options...
HumbleChief Posted July 18, 2016 Author Share Posted July 18, 2016 A bit of a challenge, but here's my attempt: Thanks David, How? Link to comment Share on other sites More sharing options...
HumbleChief Posted July 18, 2016 Author Share Posted July 18, 2016 Landing and 2 poly solids Hadn't thought of landings... Link to comment Share on other sites More sharing options...
DavidJames Posted July 18, 2016 Share Posted July 18, 2016 Thanks David, How? Half-height and full-height walls as well as p/l solids. Link to comment Share on other sites More sharing options...
HumbleChief Posted July 18, 2016 Author Share Posted July 18, 2016 Half-height and full-height walls as well as p/l solids. THX I'll that a try Link to comment Share on other sites More sharing options...
DavidJames Posted July 18, 2016 Share Posted July 18, 2016 THX I'll that a try NP. Let me know if you need me to post the plan (I started a blank one). Link to comment Share on other sites More sharing options...
HumbleChief Posted July 18, 2016 Author Share Posted July 18, 2016 NP. Let me know if you need me to post the plan (I started a blank one). That would be awesome thx Link to comment Share on other sites More sharing options...
DavidJames Posted July 18, 2016 Share Posted July 18, 2016 That would be awesome thx Here you go Walls.plan Link to comment Share on other sites More sharing options...
HumbleChief Posted July 18, 2016 Author Share Posted July 18, 2016 Here you go THX again Link to comment Share on other sites More sharing options...
DavidJames Posted July 18, 2016 Share Posted July 18, 2016 THX again I'm sure that's probably not the best way to achieve it (or even the right way), but that's the first thing that came to mind. Either way, glad I could help Link to comment Share on other sites More sharing options...
Joe_Carrick Posted July 18, 2016 Share Posted July 18, 2016 Here is one using a 2nd floor. lh 1.jpg WALLS 1 (eric).zip That's exactly how I would have done it. Link to comment Share on other sites More sharing options...
DavidJames Posted July 18, 2016 Share Posted July 18, 2016 Here is one using a 2nd floor. lh 1.jpg WALLS 1 (eric).zip I think this is a much cleaner approach. Link to comment Share on other sites More sharing options...
HumbleChief Posted July 18, 2016 Author Share Posted July 18, 2016 Here is one using a 2nd floor. lh 1.jpg WALLS 1 (eric).zip SWEET - Thanks Eric, Took me a minute to figure out what you did but once I did I was able to add a missing detail quite easily. Great solution. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now