Can't highlight a room

[chrisinnh]

When I edit exterior wall defaults and draw a basic square structure, I can't highlight the room and the roof does not build.  When I delete the structure, and revert to standard siding-6, I still can't highlight the room and a roof won't build.  Yet, when I launch Chief, without adjusting wall defaults, the software performs as it should.

 

Edit:  reset to defaults.  Did not work.  I have 2021 HD Pro- built same assembly on that platform without issue.

Edited Sunday at 08:53 PM by chrisinnh

[rwdozier]

First things, first...

 

If you can't "select" / "highlight" a room, it's possible that Rooms may be locked in the Active Layer Options. Unlock them and try it.

 

 

[chrisinnh]

Ugh, was hoping that'd do the trick!

 

Went through the process of building the wall assembly one layer at a time.  Turning on the "furred wall" option turns off the roof and makes the room inaccessible- which is very odd, I used this option on a different version of a plan earlier today.

[SHCanada2]

The other common reason for not being able to select a room is it is not actually closed in by drawn walls. If you have foundation walls on floor 0 they will create attic walls on floor one. These will make it look like you have walls enclosing a room...but you really do not

[glennw]

Have you tried toggling No Room Definition in the wall specification dbx?

[chrisinnh]

I did look at the toggle- wasn't an option, was grayed out.

 

When I looked at the framing view, framing was only showing for the original square before I entered the actual structure dimensions.  I rebuilt the framing, which then matched the structure, and I was able to click on the room (house was only one room at that point).  I do not understand why the happened/ is happening, auto everything is on.