GSD123 Posted January 30, 2019 Share Posted January 30, 2019 I think I checked ceiling height, wall height and they are correct. When I go the full orthographic the roof is on the slab not the walls. Any help would be appreciated. Thanks East Lake Barn Existing Slab.plan Link to comment Share on other sites More sharing options...
Chrisb222 Posted January 30, 2019 Share Posted January 30, 2019 23 minutes ago, GSD123 said: I think I checked ceiling height, wall height and they are correct. They are all zero. Go to Edit > Reset to Defaults, All Floors, Floor and Ceiling heights. Rebuild roof. You have other problems, though, with your Current Floor defaults. Get that corrected too. 1 Link to comment Share on other sites More sharing options...
rlackore Posted January 30, 2019 Share Posted January 30, 2019 Your room needs to be defined appropriately using the Room Specification dialog box: ...and then you need to change the Baseline Height of the roof planes: I suggest downloading a copy of the X10 Reference Manual and reading the relevant chapters. 1 Link to comment Share on other sites More sharing options...
justmejerry Posted January 30, 2019 Share Posted January 30, 2019 Also select your four walls and in the dbx under structure set to be default wall top height. 1 Link to comment Share on other sites More sharing options...
GSD123 Posted January 30, 2019 Author Share Posted January 30, 2019 14 minutes ago, Chrisb222 said: They are all zero. Go to Edit > Reset to Defaults, All Floors, Floor and Ceiling heights. Rebuild roof. You have other problems, though, with your Current Floor defaults. Get that corrected too. Thank you for the help. What do you see in the floor defaults that is wrong? Link to comment Share on other sites More sharing options...
Chrisb222 Posted January 30, 2019 Share Posted January 30, 2019 27 minutes ago, GSD123 said: What do you see in the floor defaults that is wrong? It just looked odd, but maybe not. The perspective view showed a large gap beneath the roof but it turns out your exterior walls were defined as Foundation walls, and you need to reset them to Default Wall Heights in the wall DBX Structure tab. 1 Link to comment Share on other sites More sharing options...
Kbird1 Posted January 30, 2019 Share Posted January 30, 2019 6 hours ago, GSD123 said: Thank you for the help. What do you see in the floor defaults that is wrong? Robert's (racklore) Pic's show you what's wrong everything is set to 0" eg Room ceiling hgt which explains the Roof on the Slab. Click Defaults Boxes ( assumes Floor Defaults as set as desired 1st) to put it back to 120" and turn Auto Roof Build back on to help fix the Roof. Then use Edit>Reset to defaults per this pic as suggested.... which does this 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now