Base board molding not showing

[capitaldesigns]

I input an existing master bathroom that was a platform bathtub. The client wants to remove the platform bathtub and replace

it with a free standing bathtub. When I removed the platform bathtub, which I used polyline solids to make the platform, I see

that the baseboard molding is missing on the walls where the platform was. How do I get the baseboard molding to show on

those walls ?

 

Thanks,

 

Mike

Niami_Kitchen_Remodel_2.zip

[Griffin]

Nice.

 

Draw a CAD line in plan along the wall.

Convert it to a 3D Molding Polyline line.

Open the object and add your molding from the library.

[MarkMc]

open the room dbx, moldings, use default, change to 5" to match the other baseborad

[Joe_Carrick]

Select the Room and then "Create Room Molding Polyline".  Click any segment that doesn't have the Molding and check "Molding on Selected Edge.

[capitaldesigns]

Eric, That area with the cabinet and the enclosed space to the right are a part

of the chimney. The chimney is the same width from bottom to top. They took a

part of the chimney on the second floor and made it a part of the master bathroom.

I need the walls of that area to extend above the roof with the rest of the chimney.

I did not know how to do that if that area was included in the master bedroom so I

made it into 2 separate rooms.

 

Thanks,

 

Mike