amddrafting Posted August 30, 2016 Share Posted August 30, 2016 Something that has perplexed me for year... Is there anyway at all to show a clipped corner on a cabinet and get it to butt against a wall and not default back to displaying a normal square cabinet? Link to comment Share on other sites More sharing options...
DRAWZILLA Posted August 30, 2016 Share Posted August 30, 2016 If you are wanting an angled back cabinet against a wall. I just make my base 3" or 4" thick so it shows the front as normal. Then use a custom countertop and angle it to conform to the wall. It works for now until Chief gives us angled back cabinets Link to comment Share on other sites More sharing options...
Joe_Carrick Posted August 30, 2016 Share Posted August 30, 2016 Another option is an angled front cabinet with matching back rotated 180 degrees. Link to comment Share on other sites More sharing options...
MarkMc Posted August 31, 2016 Share Posted August 31, 2016 Depends on what you mean? either what Joe and Perry suggest or if you mean a true clipped corner. Front clip has a 1/16 filler between it and the wall that is set back from the front edge of the cabinet by 1/16. IRL I wouldn't be doing that with anything less than a 1-1/2" filler likely 3 though. Back clip also has 1/16 filler between it and the wall set just forward of the clip, cabinet is 1/16" shallower than the adjacent cabinet and pulled that much off the wall. Note that there is a limit to clip size so if you need more at the back then the other suggestions apply. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now