Larry_Sweeney

Glenn..............In the foundation, which I'm just starting to work at, I have many different sizes of blocks in the same wall with different sizes at different locations around the structure. Also how I want the brick exposed on the inside and outside at the foundation level with the floor level on the interior is different at different locations. Plus where there are tie ends to other foundations, terraces and retaining wall makes making the model accurate very difficult. It's really hard to explain. I felt, for me anyway, it would be much easier to use the "open below" and place my concrete floor, and flagstone manually. There are times when using CA I can't get it to do or look correct with the way I want and it's just much easier to do certain thing manually and this is one of those cases.

Eric...............I wonder why that doesn't effect the other doors?

Scott...................Thanks. That was the problem. Have a great day.

I have a door (not the frame) that is elevated off the floor. I've exhausted all my ideas. Any suggestions? As far as I can tell the room structure with the door problem is the same as the room structures behind the doors to the left of my problem door. As you can see, those doors are okay. As always all advice is much appreciated. Greene_1E.zip

I'm trying to get this look with custom muntins in this oval window. but this is what I get Is this hopeless or am I missing something? I make sure that I'm blocking all items. Is the eclipse in the middle of the window not considered a line to CA?

Eric & Michael.............I'm a little rusty. I've been away from the program for awhile. I was doing what Eric should in his thread and it (CA) was working. I closed the program when I went for lunch. When I came back and opened the program, I did the same thing before I left for lunch and CA worked as I thought it should. I should know by now that when all else fails close out and reopen the program. This isn't the first time that has been the fix. Thanks to you both for your advice. Have a great weekend. IT'S SRING!!

What's the process of copy an object around a circle? There must already be a thread somewhere, but I'm unable to ask the correct way to find it in "search". I've tried every process that makes sense to me. I'm an old AutoCAD user and it was so simple in that program. I must be missing something really easy.

Eric & Michael..............As always---your knowledge and time are much appreciated. Have a great day.

Is there a way to set the "Drawing Group" for an entire layer? I made a layer and put many different items on that layer that started out in different drawing groups. I would now like to put them all in the same drawing group without selecting each object to change them.

Mick.............I'll take some time and look close at you idea. The only crashes (lock ups) I've had is when trying to work with the plan you sent me as I stated earlier in a thread. Hmm---------strange isn't it! I've not had any problems working on my plan with crashes. Just seems odd we'll both having issues with plans sent to each other. It may be my trusses on your end. Before I made them into symbols I converted them to solids so I could get the textures on all the faces of the trusses correct. It was a real pain, but as p-solids the textures were going in a sorts of directions. I wish there would be a way to correct that without making them solids and changing each face.

Mick...............In #7 thread I show an attach picture showing a "cap" on top of the brick. The brick are well protected under the overhangs. On the gable ends there will be additional details for protection. I just haven't got there with the model yet. . I was looking at that idea earlier. It seems that no matter what material is at the exterior, the soffit stops at the exterior face of the wall. I'll play with your idea a little later I'm end to other areas of the design right now.

Mick..............Thanks for the T&G materials. Much appreciated!

Mick........... I feel I have a good understanding of CA's "baseline". The issue I was having with the decking height on the truss was just a matter of correcting the baseline height. I've come to the conclusion the soffit stops at the face of the exterior layer and there is no changing that. The only way I see to work around the soffit problem is to revert back to two separate roof planes again or change the position of my blocking. The offset of the 8x8 on top of the wall is a detail that is on other building on the property and the client would like it on this building also. Thanks for all great advice. It's very much appreciated. Have a great day.

Eric.................Blocking worked. I could swear I've done that many times without blocking the items. Lew................To be honest, I didn't think about blocking the fireplace "box" and sending to library. I know I didn't want to send it to the library as a symbol because I wouldn't be able to modify it later. Thank you all for you bits of CA wisdom. Have a great day

I had built a fireplace in an older version plan using a series of p-solids that I want to bring into a new plan. I brought the old plan into X10 and saved it as an X10 plan. I then clicked on the items I wanted in the old plan, clicked on the copy/paste icon, went into the new plan and tried to paste them, but my "copy/paste" icon would not show. I'm sure I've done this same thing for items many times before with no problems. Am I missing something simple or is there a problem?

Mick................Thanks so much for your help. It's all in understanding the program. Your directions were right on. I had to play around a little with your directions so the decking would sit on top of the trusses, but that was manageable I was able to download your plan and look at it in plan view, but as soon as I tried a camera view CA would freeze. I was able to open a cross section, but as soon as I clicked on the roof CA would freeze up. I'm using X10 with the latest update. I don't know what was going on. What I was trying to find out from your plan version was what material you were using for you soffit material. Is it something in CA's library? I was looking in there but I'm unable, up to this time, to find a v-groove decking material. One other question. I'm going to be blocking between the timber trusses on top of the 8x8 sill beam, but the painted soffit doesn't go back far enough.. Is there a way to make it reach the blocking?

Mick...........One roof plane has unfinished wood for the roof decking on the inside of the rooms. The other roof plane has the decking painted for under the overhangs.

Eric...............Thank you. You "pulled through" again! I was hoping I was just missing a setting. I unchecked that box for the upper roof also, but I lost the decking material altogether. Strange, because the lower roof was derived from the upper roof at the start. Have a great day.

Working on a new project and I have a roof where I'm exposing T&G decking on top of timber trusses. Inside the decking is unpainted. On the overhangs the decking is painted. I'm using one roof with unpainted decking where it can be seen from the inside. On the overhangs I'm using the same roof with painted decking to match the rest of the exterior painted surfaces. To get the painted decking I "blended" a color to the original decking color and changed the name of the decking material. The problem is when I look at the material in camera view the decking material on the overhangs has not changed color. I've tried using the eyedropper to change the color also to no avail. I'm at a lost to what is going on. Any help will be much appreciated. Green Pool House and Pavilion.zip

Michael................I downloaded the trial version of WinRAR. If I lose it after a certain time I'll probably go to something like 7-Zip.

Lew....................Thanks. Once I got reading on the site they recommended the 64 bit also.

Eric...........Thanks

Eric.............I'm looking at WinRAR right now. They have a 32bit and a 64bit version. Is there or should there be a preference to which one? I'm running Windows 7 Pro.

Eric........................There are a lot of free ones "out there", but I don't which one. I'm researching but always looking for advice

I'm looking to download a program to open RAR files. Does anyone have a preference for a certain and why? Thank you in advance for your comments