mtldesigns

I figured it out.. its a setting "display as callout". This doesn't show any camera, and instead I can put my own "callout" in on that specific set. Thanks to all.

Doing a Kitchen & Bath set, 1/2" scale. In this set I have a Wall Elevation camera that is showig up on all other sets of that same view (Floor plan, framing plan, etc...) How do I turn this off where it shows only on the set I want? I created a new layer and put this camera on, to no avail.

Awww.. it did it just as I hit send on the comment above. And guess what, the two that were converted to blocks did not... The only issue I have is now that the schedules are blocks, they do not update, unless you explode. Come on CA.. figure this one out please. Already a lot to do to get a drawing ready, I can see this being a missed step.. exploding a schedule.

I know exactly what you mean AB, because for some reason its doing to me. Never before, but this project it is. Every once in a while when I switch layer sets, all the schedules grow. After stretching the top three schedules back to original shape (again) I thought I'd look on here for a resolve. This isn't happening in the layout side, its on the plan side. My schedules are sent to layout on their own, to scale, so text is correct size. I did change two of them to CAD blocks (as suggested) for a test. If two happened to do this again the others don't, we will know the fix.

Hey CA, Still no fix on these sidelight issues? Shouldn't be coming in as a bi-fold. I have modified (as mentioned above), but this should be a simple library fix.

I do what Michael does as well, but I use a straight half wall instead of dragging the wall down. I just set at height I need and modify the rail (see attached). But as mentioned, there are a couple ways to do this.

Damn, you Pacific Ocean guys are quick, and thanks. I should have more clear, I knew the polyline options, was just curious of why even have the first option at all, if its not usable. Even if you did have a square drive, the poly option is probably used more often.

What I mean, is the shapes? I'm unable to break and adjust to fit the house and site plan. Not a show stopper, because there are other ways to make this work, but what's the sense of having this if you really can't use it. I shouldn't have to put three "driveway" rectangles in to get the one finished shape. Maybe a future fix?

LOL... No Perry, not a urinal, but it could be used for one if they had toga parties. This happens to be an old porcelain wash basin (5 ft. long) that they had in another building that was tore down and they want to reuse it. Scott, Sherry and Jerry. Thank you for the great suggestions. When I read your replies this AM, I had one of those "duh" moments. I guess brain wasn't thinking very clear last night. Thanks again everyone..

I have client who wants me to design a break room "pod" inside an existing manufacturing building. The main building has 20' ceilings and the new break room has 10' ceiling, but the top of frame will be at 14'. But when I enclose the main building ceiling, the break room walls expand to the main building ceiling. I have turned off ceilings and roofs and tried to do manually?? Any ideas?

CA's solution until corrected: In the meantime, I would recommend using a custom backsplash on the walls that the paint is overlapping the edge. Add a custom backsplash in 3d view by going to Build> Cabinet> Custom Cabinet. Click on the wall and then adjust if needed to the edges of the wall. Next, open the Custom Backsplash Specification and set the Material Layer to 1/16". You can then change the material to you blue color. This should cut around the doors and cut correctly at the edges of the wall.

This is CA Tech Supports message to me today. I made sure it wasn't operator error when I sent my case. "Nope, not operator error. We could reproduce (the same issue) on a completely new plan, set up with similar conditions. The developers will be taking a look at this issue and prioritizing when it would be in an update of the program. I can't guarantee exactly which update that will be at this point. However, if they need any additional information I will be sure and reach out. Thanks again for letting us know of the problem!"

Just a follow up. I sent pictures to tech support and now they have my model to see why my end of walsl weren't painted. Actually, I noticed in other places as well. The first pict. I attached is the same wall as my original comment, but now both ends are messing up. The other picture is an exterior wall, on the first floor.. don't know what's going on. But will keep all informed on what I find out.

The best part of X8 is the 3D mouse capabilities. The walk thru's are so natural now.

Finally got back on this tonight. Yes, I have tried the multiple camera views and nothing works unless I delete the railing. I also deleted wall and re-drew. That was fun, just to tell you. :-) For some reason all of my moldings (base and crown molding got flipped to the exterior walls, but the walls did not flip...go figure. I am leaving this as is for right now. Its just paint, right. When I do ray traces, I will get around it. Need to get this one wrapped up. Dennis, I made a mental & sticky note to come back to this when design is complete. If I can't resolve (just to know why it did this for future) I will send plan your way to play with. I was just hoping it was a quick fix is why I asked the question last night. Thanks gentlemen.

Right at this railing, the color of the blue wall does not extend to the end. However, when I delete the railing it does. Obviously I need the railing, so how do I fix this? I've painted the wall in camera view, in perspective view, and thru wall specification to no avail. I've also attached the plan view showing the intersection.

Interesting... I still have both of my catalogs.

Thanks for all the input. Will upgrade tomorrow (supposed to be nasty outside anyways). Will let "all" know if there are issues.

Sorry, I looked to see if this had been discussed and did not see a forum. I am sure I missed it though. However, is the X8 suitable for Windows 10? I am working with W8 now, but would like to upgrade, but my CA must work with it Just making sure before I do. Thanks,

glad you already asked this question.. I can keep going.

thanks Joe.