Joe_Carrick

Did you save the CAD Detail after changing the Annoset? Are you accessing the CAD Detail from the Layout?

You can place multiple appliances in a single tall cabinet. The key is to first place one appliance - I prefer the oven. Then open the cabinet dbx and select the front element below and set the type to "appliance" which you can then select from the Library. Continue to do this for each fron element. Once you have the Cabinet customized with all the appliances in it - SAVE IT IN YOUR LIBRARY - so you won't have to do the same thing on the next project where you want that configuration. BTW, IMNSHO you are trying to put too many appliances in a single cabinet. It makes the MW way to high - unless it's for a couple of NBA or WNBA Players, My maximum stack is a Warming Drawer, 30" wide Oven, Microwave (with trim kit). For double that, I put another stack right beside the first one.

Not "Molding Planes". "Molding Polylines" - basically a Line on which you can add 1 or more Molding Profiles and/or 3D Molding Symbols. Learning to use this tool is a big deal in Chief. With it, you can create a lot of "extruded shapes" for railings, etc.

1. Why use "Floor supplied by Room Below"? 2. What is the Room Below?

Robert covered it pretty well. There are other ways to do it (and it could have been pretty easily built in Chief instead of Sketchup) such as Molding PLines, etc.

I'm jumping in late here, but I think you could just not call it a garage and change the Floor Height in the Room dbx. That should resolve the Stem Wall issue. You can Name the room "Garage" but just not use the "Garage Room Type"

Still no attachment. Once you select the file, you still have to click "Attach this File"

I just right-click on the Taskbar and select "Start Task Manager". I guess I just like using the mouse rather than the keyboard shortcuts.

No attachment. IAE, you would probably want to import the SKP as an Exterior Fixture or Furniture Symbol.

Just curious, has anyone tried makeing the symbol "Ceiling Mounted" with "Flush Mounted"? The z origin might need to be adjusted to mount at the correct height relative to the beam, but it should work.

I would like to be able to set Upper Case as a default within any given Text Style and/or Label. IOW, make it possible for us to specify what we want to be Upper Case and what we want to be Uppercase/Lowercase. Typically, I like general text (the 1/8" Default Text - whatever font I select- usually Chief Blueprint) to be all Uppercase. That's the body of notes, etc in the CDs. Larger Text such as View Names, etc I have come to be comfortable with as Uppercase/Lowercase - mostly because it allows more characters within a given width. Note: Just for readability reasons alone, I don't want anything less than 1/10" in height on the final printed sheet. I actually prefer 1/8" but since the computer fonts are more legible than hand drafting I can accept 1/10" as the bottom limit.

I would use a 3D Molding Symbol on a 3D Molding Polyline. The Symbol would be a single Brick + a grout space (soldier course) and the 3D Molding Polyline would be an arch drawn in the Elevation View. For the Material of the Brick, use a grainy brick red color/texture - don't use an actual brick texture. The other option would be just a 2D Molding Profile on the 3DMolding Polyline and a Brick Texture.

It seems like Wendy disappeared once Chief provided Shadow Boards. What happened to her?

So delete the offending Layout Box and then send the view to Layout again with the correct Layer Set.

Perry, The best solution I've found for the Apron Front Sinks is to use a Cabinet that's shorter (by the amount of the Sink Depth) and set the Counter Top thickness for that Cabinet to 0. That eliminates a lot of other problems - like the front panel of the Cabinet possibly protruding into the sink. Besides, that's how I specify the Cabinet. I do the same for commercial Cook Tops - they just sit on a shorter cabinet.

Mull the Door and Sidelights first. Then make sure the edges of the transom are aligned with the edges of the sidelights and mull those together. Chief simply requires that the heights match for side by side and that the widths match for vertical mulling.

I would seriously like to be able to specify all of these things according to the size I want them to be printed. Most of the computer world uses the Point Size but as draftsmen we think in terms of Ruler Size. Here are some examples: Text 1/8" Chief Blueprint 3/16" Arial 1/4" Chief Blueprint 1/2" Courier 1/2" Comic San Serif Arrows 1/8" Filled Slant 1/8" Barbed 3/16" Filled Barbed Callouts 3/8" diameter 1/2" diameter 5/8" diameter Dimension Setup 1" Initial Offset 3/8" Spacing etc. This is the way we were trained and how we think about annotation sizes. Chief currently provides us with a little built-in calculator so we can determine what real world size to specify so that we get the printed size we need depending on the desired scale of the final printed output. By having all of these things specified in the Text_Style dbx in printed size, Chief could then simply adjust according to the scale ratio. IOW, if the text size is specified as 1/8" then Chief would simply multiply that by: 24 for a 1/2"=1'-0" scale 48 for a 1/4"=1'-0" scale 96 for a 1/8"=1'-0" scale etc. The same factors would be used for Dimension Spacing, etc. Please let's get this part of the program back in line with how we think of these things.

Chief has some separate sidelights - I don't remember off hand if they'te in the Core, Bonus or Mfr Librarie - which can be place with the Door and a Window above an mulled together to form a single unit.

Doug, I disagree in this regard, Annosets don't set Defaults, they simply select a set of "Named Defaults". IOW, the user may have several "Named Dimension Defaults", several "Named Text Defaults", etc. An Annoset just selects which "Named Defaults" are made Active. It's the "Named Defaults" that actually define/specify the Default settings. This is why I suggest that Mark start a thread about Dimension Defaults.

Larry, Why not just a new Layer Set? Is it because you want to have a different CAD Layer or a different "Locate Object" setting in Dimensions that you need an Annoset to select everything at once?

Mark, Defaults are their own subject. It's really a separate topic from Annosets per se. Start another thread and I'll pitch in with whatever wisdom I can provide.

Now your talking. Put #1 in the Layerset and add the option for Annoset in the Layerset and you'll make me really happy.

1. It sets the Current CAD Layer 2. It sets the Plan Annotation Defaults to a set of "Named" Defaults which in turn set the "Named Text Styles" 3. It optionally selects the Active Layerset or leaves the Current Layerset as is. That's it in a nutshell.

Currently I use about 30. I would like to be using only about 10. Better yet, I would really like to just be using about 20 Layersets and no Annosets at all. With the current software I don't have either of my preferred options.

I disagree with Robert. Chief is better at making Details than AutoCAD - but you need to know how to use Chief's capabilities to get those results.