Designer100

Members
 View Profile  See their activity

  • Posts

    381

  • Joined

  • Last visited

 Content Type 

Everything posted by Designer100

  1. Designer100
    I did this and it did not fix the issuers!as you can see on attachment. Open each room and uncheck Mono Slab. Set the floor structure to Default. Still did not fix issue to get Floor josits to show on 1st floor foundation. Do I need to draw joists in manuely and cmu below the josits? Engineer will be designing, butI need to show so perpective and bldg section is right and close in with latice. Plan 5661LAF.GARAGE.PIER&BM.zip
  2. Designer100
    I cannot get the floor joists to build.It originally a regular slab home. but now it is pier and beam with concrete block around preiemerter at 8' o.c. or wha ever engineer specs out. I cannot the the floor joist to build on first floor, cannot garage to show 4" drop with preimerter walls and regular lab,garage left wall to close in. Rear deck will not show up in rendering either. FFE 61.00, top of cmu blocks 60.00, existing grade 57.30', top of grade beam 57.33. garagefloor 52.33 8 cmu blocks abovegarage slab.perfer 12" all around outside of garage foundation. I would appreciate getting the first floor joists to be installed. and the other issues. Plan 5661LAF.GARAGE.PIER&BM.zip
  3. Designer100
    THANKS FOR IMPUT. i FIGURED IT OUT .
  4. Designer100
    Roof issue and elevations. having catheral new patio 24' with and 7' depth and flat ceiling at bar area tieing into exist porch. .Catheral living area with gable on back. roof from rear wall going to catch 2nd story wall. end floor not showing completely right Remodeling project. trying to 3 D of the back and left side area. I would appreciate any help on this so roof and 3 d will look right. 11X17 LAYOUT.layout PineTrails.Patio.plan
  5. Designer100
    Tommy& Solver, I apprecaited your help. Thanks, Newell
  6. Designer100
    I have it defined as Deck Railing/fence -wall type? change material to birch and it still did not correct it! any other suggestions. Newell newell@newellcheatheam.com
  7. Designer100
    I would appreciate any help: I cannot get the balcony floor to close in on the front (see picture). Also fascia 2nd floor (see pic, shooting a board out ) Cannot get the chiminey to bring up one of the walls above the roof. Thanks for any help in solving these issues. Kamrath.David exist. plan.plan
  8. Designer100
    This home needs on front garage Gable 3:12 pitch lower and 8:12 pitch higer (48 inches in from plate) I can not get it to work with 2 pitches. Would appreciate help. Thanks newell.cheatheam@gmail.com Burris.Phillip_Plan_11.06,18.zip
  9. Designer100
    i HAD HOLE CUT THE WAY YOU SAID.DID NOT CUT IT OUT. ALSO HOW DO YOU JUST REBUILD DECK FRAMING?
  10. Designer100
    1. I would appreciate help. designed a deck, but cannot get chief architect to cut hole in deck around tree 36x36". It also needs to reframe the deck. Cannot get it to reframe the deck and around the new hole it cuts. 2. Also where entrances to barn on both sides is level with grade and the rear of bldg at deck is 18" to foundation ht of barn. edge of exterior deck is 18" ht, then out about 36" from outside deck , it starts slopping down hill to rear.. I cannot get the deck and foundation ht to look right. (right now it is sloping the other way)! Lane.Joe -Coyle 2.plan
  11. Designer100
    thankyou for your help
  12. Designer100
    I cannot delete the 2 columns under stair at balcony. I only need 3 columns on the stair side or carport or balcony. When I put stair it added 2 columns. I cannot delete them and would appreciate anyones help. this is all I like finishing up. Lane.Joe -Coyle.plan
  13. Designer100
    The rear of this barn is around 18" from top of floor to grade.Front by doors is regulart top of grade to go out doors. I am trying to have deck at 18" on back deck then starts slopping toward back of property with 3-4 steps. I cannot get it to work. Lane.Joe -Coyle.plan
  14. Designer100
    thanks
  15. Designer100
    The attached pergolia remodeling I am trying to copy and paste stone column, with cap and 8" wood posts to another plan of same buliding of site plan. I even blocked the column and it only pastes the stone base , not the cap nor the 8 in posts. I would also like to past the pergolia framing etc. to the new plan. but mainly the full columns now. any suggestions. Pergola.zip site plan.zip
  16. Designer100
    Awsome suggestions
  17. Designer100
    Here is updated file, but I cannot seem to get the stem walls to not go above slab. Need 12x12 treated columns 15 ft to bottom of 2nd level structure. Also need slab continuing under the decking. any help would be appreciated. Thanks, Cruz Beach house.zip
  18. Designer100
    I have tried Ref. no. KB-01027 but I have already created the level 2(considered 1st floor) and level 3.then trying to do foundation with pilings and parking below and still cannot get it to work. The stem walls go all the way up.
  19. Designer100
    I was trying to have prelim. plans ready for client on this 3 level beach house on 12"x12" pilings. Chief support said to draw the 2nd and 3rd level floors then come back and do the foundation and piliings which is to be 15 ft to btm of struction for the 2nd level living. I cannot seem to get it to work right. Also the 3rd level has concrete base with deck on top of it to be waterproof. Can anyone help. Thanks Cruz_Beach_house.zip
  20. Designer100
    steve, Thanks, I did some of the things you mentioned in video, But cannot get the dentils to go on the front and ceiling of porch is showing asphalt also. Any recommendations. Gonzales.Karen.plan
  21. Designer100
    I need a ushaped stair with 9 risers at long wall side and 2 corner steps at each corner. not landing there. Can anyone help with this? O have never designed one of this? I am doing a remodeling on the 3rd and 4th floor of townhouse. Existing plan in background. Just drawing outside walls and stair on inside of 1st and 2nd floor. any help appreciated. townhouse.plan
  22. Designer100
    Still connot get the balcony railing to close up and post on corner.
  23. Designer100
    1. I am having a problem getting this front entry porch to look right. need 18 in between btm and to top of roof. Also need the railing to set on it with posts on each corner. Cannot seem to get it to work. 2. is there a way to put 2 in dentals 6" o.c. on the fascia 2nd floor and first floor roof across the front down garage right side. Do I need to remove the gutters for this to happen? attached is picuture I am having issues with. I would apprectiate any ones help. Thanks, Newell Cheatheam newell.chatheam@gmail.com 281.392.3034 x10 , windows 10 Gonzales.Karen.zip
  24. Designer100
    Thank you guys for your help. Newell
  25. Designer100
    Here it is unzipped. 18x30.Katy Plumbing layout.layout Pergola.plan