LotzCC Posted Friday at 11:10 PM Share Posted Friday at 11:10 PM I have one portion of a roof with an overhang/soffit that extends 2 or 3 feet further than other adjacent roof planes, but the soffit does not extend to the house wall. See attached site photo and screen shot of my current model. Please help. Link to comment Share on other sites More sharing options...
BenPalmer Posted Friday at 11:58 PM Share Posted Friday at 11:58 PM Define/create a room under the soffit with invisible walls OR manually draw in the soffit with a 3D solid. Link to comment Share on other sites More sharing options...
SHCanada2 Posted Saturday at 02:13 AM Share Posted Saturday at 02:13 AM up to about 36" you can set the eave for that wall, and in the build roof, set the eaves to boxed with flush eave Link to comment Share on other sites More sharing options...
mtldesigns Posted Saturday at 02:37 AM Share Posted Saturday at 02:37 AM 3 hours ago, LotzCC said: extends 2 or 3 feet further than other adjacent roof planes, but the soffit does not extend to the house wall What I would do is go to the attic level, and extend that gable wall all the way to the edge of that roof plane. Then manually draw a flat ceiling plane for the soffit. Then you won't need a roof definition below and I believe you can create framing. A solid would work too, but will not provide framing (if you need that) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now