DzinEye Posted April 10, 2020 Share Posted April 10, 2020 Everyone once in a while I get this random fill or no-fill between adjacent windows or windows and doors when the spacing between is always the same in both places. Link to comment Share on other sites More sharing options...
Renerabbitt Posted April 10, 2020 Share Posted April 10, 2020 17 minutes ago, DzinEye said: always the same Is it the same ? Delete the left window and try a Copy/Paste+Reflect About Object on the right window. Link to comment Share on other sites More sharing options...
Dermot Posted April 10, 2020 Share Posted April 10, 2020 My best guess is because the spacing is not the same. Take a look at the attached picture. When you click on the dimension, the program will show the actual distance between the windows. If the distances are not the same, you will not get the same results. 1 Link to comment Share on other sites More sharing options...
DzinEye Posted April 10, 2020 Author Share Posted April 10, 2020 16 minutes ago, Dermot said: Because the spacing is not the same. Take a look at the attached picture. When you click on the dimension, the program will show the actual distance between the windows. That's what I did to make sure they were the same before I posted Link to comment Share on other sites More sharing options...
dshall Posted April 10, 2020 Share Posted April 10, 2020 1 minute ago, DzinEye said: That's what I did to make sure they were the same before I posted It looks like the casings might be a bit different. Link to comment Share on other sites More sharing options...
DzinEye Posted April 10, 2020 Author Share Posted April 10, 2020 28 minutes ago, Renerabbitt said: Is it the same ? Delete the left window and try a Copy/Paste+Reflect About Object on the right window. Tried that both ways... delete left vs. right and no change either way. I tried copying that wall and those windows into a new plan to post it here and then of course the problem goes away Link to comment Share on other sites More sharing options...
DzinEye Posted April 10, 2020 Author Share Posted April 10, 2020 FWIW... Here's the plan... Lopez.zip Link to comment Share on other sites More sharing options...
Dermot Posted April 10, 2020 Share Posted April 10, 2020 It's the invisible attic wall that connects in the middle of one of the windows. It's preventing the windows from mulling together. In the future, you should always report these kinds of issues directly to technical support. Link to comment Share on other sites More sharing options...
DzinEye Posted April 10, 2020 Author Share Posted April 10, 2020 (edited) 13 minutes ago, Dermot said: It's the invisible attic wall that connects in the middle of one of the windows. It's preventing the windows from mulling together. In the future, you should always report these kinds of issues directly to technical support. Didn't know it was a tech support type issue. Okay... I deleted those invisible attic walls but the problem still persists. Did you try it? Strike that... now I see it's automatically come back as a regular attic wall on a layer that I had turned off. Edited April 10, 2020 by DzinEye Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now