4hotshoez Posted September 16, 2014 Share Posted September 16, 2014 Does any one know why this happens? I can select the wall and open its settings and then close the settings an the wall rebuilds and shows correctly. But it continues to do this randomly. Link to comment Share on other sites More sharing options...
CJSpud Posted September 16, 2014 Share Posted September 16, 2014 Is it possible that you have a wall break in that wall and the missing part is designated as invisible? Sometimes walls can get corrupt and the easiest and quickest solution is to just delete them, select the perpendicular wall at the corner and drag the make wall handle down to re-establish your wall. If I have windows and doors I don't want to have to redo, I will temporarily place a new wall off to the side and copy any windows and doors into that wall so I can re-copy them back into my replaced wall. Link to comment Share on other sites More sharing options...
DRAWZILLA Posted September 16, 2014 Share Posted September 16, 2014 Post the plan Link to comment Share on other sites More sharing options...
4hotshoez Posted September 16, 2014 Author Share Posted September 16, 2014 When I was changing the interior walls I had moved some objects outside temporarily. It is not set as invisible and can be forced to rebuild correctly, but will vanish without notice. Brandenburg07.plan Link to comment Share on other sites More sharing options...
rlackore Posted September 16, 2014 Share Posted September 16, 2014 There is an extra window pasted over the Pella 4859. Delete one of these windows and your problem should be fixed. Link to comment Share on other sites More sharing options...
DRAWZILLA Posted September 16, 2014 Share Posted September 16, 2014 I put a wall break as shown and it seems to fix it. when I first viewed it , the plan looked ok, then I hit f12 and the wall went blank. The break seems to fix it for some reason. Link to comment Share on other sites More sharing options...
4hotshoez Posted September 16, 2014 Author Share Posted September 16, 2014 There is an extra window pasted over the Pella 4859. Delete one of these windows and your problem should be fixed. Thanks for picking that out, but how can I know that? Link to comment Share on other sites More sharing options...
rlackore Posted September 16, 2014 Share Posted September 16, 2014 Thanks for picking that out, but how can I know that? You probably can't until you generate a window schedule and notice the extra entry. I took a guess that it was a problem with the window buy examining the dialog boxes for the wall, both in plan and elevation. If you examine the 3D representations, the framing for the wall goes missing at the window location. So I selected the window and deleted it. That's when I noticed there were two windows. Here's the plan view dbx that shows half the framing missing: and the elevation view dbx that shows half the wall missing: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now