Most OnlineNewest Member
You've found it! A thread offering up some of my favorite symbols and content for Chief Architect X-11.
These items are for X-11 only. If you haven't updated yet I encourage you to do so, it's a great release.
The following content is listed by category with both a link to the post within this thread for easy navigation and a link to a direct download if you won't to cut straight to the chase. new/recent uploads are in RED font
CLICK ON THE "DL" FOR INSTANT .CALIBZ DOWNLOAD:
CONSTRUCTION ASSEMBLIES/ARCHITECTURAL ITEMS:
RABS 42 CABLE RAILING - DL RABS MODERN FRONT DOOR AND DOOR ASSEMBLY - DL RABS INTEGRATED SINK - DL NEW!!! 03/26/2020
RABS CHARLES-HILL GROUPED LIVING ROOM - DL RABS CHELTON GROUPED LIVING ROOM - DL ACCESSORY HOME #1 - DL ACCESSORY HOME #2 - DL ACCESSORY HOME #3 - DL
3-ISLANDS - DL LA CORNUE 1908 RANGE - DL CAFE APPLIANCES, PAINTABLE(CORRECTED) - DL
PENDANTS AND SCONCES - DL-1 - DL-2 - DL-3 - DL-4 RECESSED NC HALO 4 INCH LED WITH HOUSING - DL NEW!! 03-22-20
TILE AND COUNTERTOPS #1 - DL 1(ONEDRIVE LINK) - DL-2 CUSTOM WHITES WITH PAINT TOOLBAR ICONS - DL-1 - DL-2 - DL-3 - DL-4 - DL-5 - DL-6 RABS RUGS 1V1 - DL RABS STARTER KITCHEN MATERIALS PACK - DL RABS FLOORING PACK 1 - DL RABS OLD GOLDEN OAK FLOOR - DL
FIREPLACE ASSEMBLY 1 - DL ACKLES BED AND EDISON TABLE LAMP - DL-1 - DL - 2 TEAPOT MATERIAL EDITOR REPLACEMENT - DL-1 - DL-2 FINMARK TABLE FROM CB2 - DL FIREPLACE MANTLES 1 AND 2 - DL RABS STRETCHABLE PICTURE FRAMES - DL
Many of these I have personally made or modified. Some of the content may have been created by others for which I will give credit. Many of the materials have free licensing, so no credit is needed.
Some of this content may slow down your program as I have a high powered machine and often times use complex and high resolution textures. I will try and give as much detail as possible. Use at your own peril!
No but seriously dig through and enjoy, I've spent a good number of hours ensuring the quality of these symbols and will update them periodically- so CHECK BACK IN! and PLEASE GIVE A LIKE FOR THE POST OF ANY SYMBOL YOU LIKE, IT ENCOURAGES ME TO GO BACK AND REFINE/REDUCE/OPTIMIZE THAT SYMBOL. GIVE A DOWNVOTE AND IT'LL PROBABLY ENCOURAGE ME TO DO THE SAME THING...YOU'LL JUST BE A JERK FOR IT
02-12-2019- 4:45PM: Removed the poll, migrated this thread. re-uploaded from X11 public beta 02-20-2019-2:59PM: Added a Poll for user content requests 03-30-2020-6:49PM: Deleted Video Links and added link to YouTube Channel Post 5:
02-12-2019- 4:45PM: centered the hearth on the symbol Post 18:
02-12-2019-9:52PM: Posted and fixed DL links
Here is a symbol to get you started:
@Cheryl_C_Crane Think you requested this,
RUSTIC BRICK 2.calibz
Number of Textures: 2
Map size: 1024x1024
Filesize: 3.13 MB
Our content development team is continually developing new objects and materials to be used in renderings like these.
Some catalogs that might appeal to this home's style include Country Primitives / Farmhouse No.1 and Country Primitives / Farmhouse No.2. Those aren't the only option though, the 3D Library features over 350 catalogs that can be downloaded to compliment your designs.
Alright guys need a few suggestions... So I'm a custom woodworker and I'm building built-in bookshelves and a mantle unit for a customer. Normally I'm able to come up with certain techniques in modeling custom millwork projects that are "out of the norm" or beyond the standard cabinetry presets here in chief, but this one is a little more complex.... The unit I'm building consists of floor to ceiling bookshelves with a fireplace surround and mantel in the center. So far easy to do.. but in this particular build the customer wants the bookshelves to have angled dividers/faceframe-stiles that the shelving will go in-between. I've attached some photos to this post so you can have a better idea of what I'm doing here. I build everything custom so I know exactly how I will build the unit, I'm just unsure of how to create a model for it here in chief. I'm assuming id use some sort of 3d polyline to create the angles, but I'm not too familiar with using this feature. It would be nice if I could somehow use a partition and angle it in between two cabinet sides, and manually add shelving in between. If anyone has any ideas id be eager to hear...
EXAMPLE OF SHELVING
ELEVATION VIEW OF UNIT I AM BUILDING