capitaldesigns

Thanks Eric, What do you mean, Through Wall at End ? How do I do that ? Thanks, Mike

I am doing a small addition/remodel. We are enlarging the family room. One of the new walls of the addition will connect an existing 45 degree wall corner. When I connect the new wall to the existing 45 degree wall corner the existing walls disconnect from each other and looks like they trying to merge with the new wall. How do I keep the existing wall corner to remain attached to each other ? I have attached the plan so you can see what I am talking about. One more question. How do I wrap a beam with 1/2" gyp. bd. ? Thanks, Mike 2017-02-X9_Design_1.plan

Thanks Mike. I see where you checked off the "lower wall type if split by butting roof" and called off the lower wall type. I see where you broke the roof planes around the interior fireplace. What I did was increase the ceiling height of the chimney to be above the roof height before I drew the roof planes. I thought that the roof planes would go around those higher walls. Thanks again, Mike

I have been inputting a set of as-built plans into CA. There are two first floor and one second floor fireplaces. On a part of the two first floor fireplaces, one of the chimney walls are showing gyp. bd. instead of stucco. How do I show the wall with stucco above the roof and gyp. bd. below the roof ? The second floor fireplace is in the middle of the floor and the walls of the chimney do not extend up through the roof. I have clicked inside of the 4 wall that make up the chimney and gave the room a height that will put the top of the chimney above the roof. The chimney wall do not show above the roof. How do I get the walls of the chimney to extend above the roof ? I have attached my plan so you can see what I am talking about. I clouded the areas I am having trouble with. Any help will be greatly appreciated. Thanks, Mike 2017-02.plan

Tried the half wall. You do not get the glass panel over the door.

I have not upgraded to X9 yet. I will do that this afternoon. Thanks for pointing out the new tool. I'm glade you figured out that a new shelf ceiling tool could be used for shower wall heights. Thanks, Mike

I am inputting an existing master bathroom into CA. The ceiling height of the bathroom is 10'. One of the shower wall sits on top of a 22" high bath tub platform. The other wall of the shower sits on top of a 6"x6" curb. The glass shower walls are 7' high above the curb and 5'-8" high above the 22" high platform. The shower wall are extending to the bathroom ceiling. How do I keep the glass shower walls from extending to the ceiling ? The existing shower has an 18" gap between the top of the glass shower wall and the ceiling. I have attached the plan. The master bathroom is on the second floor. Thanks, Mike 2017-02.plan

Thanks Eric & Michael, Michael, Inserting two pass-through openings and dragging them just passed the ends of each wall worked out great and was very easy to do. As you said, Not super intuitive. Eric, Thanks for your help on correcting the disappearing wall corners. I deleted the multiple window panes and it now works fine. How did you know that there was multiple window panes ? I wonder if this happened when I copied them to the second floor. I copied and pasted them in place, then went to the second floor and pasted them in place. If that was the problem I wonder why not all of the windows I copied to the second floor had the same problem. Thanks again, Mike

Hi Eric, I have attached my plan. The fireplace I am talking about is on the second floor. Another problem has come up. Some of the corner walls on the first floor keep pulling apart. I have selected the walls and pulled them a couple of inches apart then let them snap back together. That fixed them for awhile. When I went up to the second floor then back down to the first floor the walls had pulled apart again. Why is this happening and how do I keep it from pulling apart again ? Thanks, Mike 2017-02.plan

Thanks. I was looking under door defaults. Both solutions for this door. Thanks, Mike

I am working on a project that has a 2 sided fireplace insert. How do I place it in the corner of a wall. I have seen videos of placing a one sided fireplace in a wall. In that video the placed a pass through opening in the wall from the windows drop down menu. They then sized the opening to the size of the fireplace insert. How do you make the corner openings in the walls for the 2 sided corner fireplace ? Thanks, Mike

I am entering a house that I measure last week. The toilet room in the master bathroom has a 45 degree wall with a 2'-4"x6'-8" door. The interior dimension of the 45 degree wall is 2'-10". CA will not let me insert the 2'-4" door into this wall. It reduces the size of the door down to 2'-0" wide. The only way I can place the 2'-4" wide door in this wall is to reduce the casing down to 1.5" wide. The problem is that when I reduce the casing it does it on both side of the door. Is there a way to have the casings on one side of the door be different size than the other side like we can do with exterior doors ? I measured 3.5" distance from the edge of the casing next to the door opening to the corner of the 45 degree wall. Why will CA not let me have a 3" casing since there is 3.5" of wall to attach the casing ? One last unrelated question. I just viewed a video that Alaskan Son did regarding making custom columns. Is there a way to tag these videos and/or topics for future reference ? Thanks, Mike

I have a sliding barn style door in one of my projects. Its not a pocket door but it does slide on a rail attached to the side of the wall. I used the doorway command to create the opening. I manually drew the door in the open position since I could not find a similar door in CA. How do I get this door to show up in the door schedule ? Is there a way to add an extra line in the door schedule so I can manually type it in ? Thanks, Mike

I know what you mean when it comes to converting AutoCAD details to CA details. I spent a day and a half converting 22 details I drew in AutoCAD to CA details. CA does not give to many tools to help make this process easier and quicker. I have 4 more details I have to covert tonight and several hundred to go. Does anyone know why CA will not incorporate some of the CAD tools AutoCAD has in its program ? I just found out today from tech. support that you can stretch the building but you can not stretch a CAD detail. So if I had a partial wall section and needed to stretch it up to make it a 10'-0" wall from an 8'-0" high wall I can not to that according to tech. support. AutoCAD has had the stretch command since the 80s. Its a very handy tool and I use it all the time in AutoCAD. You would think this would be much easier to program stretching a wall section detail v. stretching the entire building. Thanks, Mike

Thanks for the info. I like the idea of inserting the details directly into the layout sheet. It would cut down extra steps of first inserting them into plan or detail management then sending them to the layout sheet. To make sure I get this correctly, if I insert the detail directly into the layout sheet then rescale to the correct size, then save it back to the user lib. After that when I insert that detail into a layout sheet it will come in at the correct size as saved from the layout page. Is this correct ? Thanks, Mike

I have been inserting my details into the layout page. They are coming in at least 10 time larger than the title block. It does not matter if I drew the detail in the plan or in CAD detail management they all come into the layout page way to large. I also tried one of CA pre-drawn details and get the same results. Is this normal ? Is there a way to have them inserted at the right scale without having to rescale each detail one at a time ? Thanks, Mike

X8. I will upgrade sometime this week.

It's still happening. I was able to get 3 text lines with arrow correctly before it started again. I saved everything and closed the program then restarted it up again. I was able to get one two segment line with arrow before it started placing two arrows again. I guess I will have to call tech. support tomorrow morning. Thanks, Mike

I just check, It is not toggled off. I just found out that if I draw a few straight lines with arrow then draw one with two segments the problem goes away. I do not know if the problem will come back again. I will let you know in a little while. I am in the process of converting hundred's of details I have drawn in AutoCAD over the last 23 years. I will be using a lot of line with arrows since most of the AutoCAD arrows did not convert over to CA arrows. Thanks, Mike

I am having a problem with both the line with arrow and text line with arrow command. I am getting two arrows. When I make a turn in the line with arrow I get two arrows, one at the turn and one at the end of the line. This has been happening the last couple of days. It never happened before. Does anyone know how to fix this so I only get an arrow at the end of the line. Thanks, Mike

I says it's rich text.

I am importing notes from AutoCAD that I have accumulated over the years. The notes come into CA as single lines text and not as a paragraph. They coming in at a text size of 21/128". I want to be 4.5" in a 1"=1/4" scale. Is there a way to do is at one time ? When I group select them, I do not have the option to change the text size. Thanks, Mike

Where do I go to o that ? Thanks, Mike

My floor plan is off to the left by 90". Y is at 0"

No PDF's. I also noticed that when I zoom in to a smaller part of the plan the cursor moves much more smoothly than when I am zoomed out.