BrownTiger

Why wouldn't chief box the return on the second floor? How can I add a gutter on that side parallel to face ChiefQuestion.plan

It may be a job for chromecast... The hardware is cheap....

If you just want mirrored monitors, follow http://windows.microsoft.com/en-us/windows-vista/set-up-multiple-monitors and set mirrored. You can do the same thing with NVIdia control panel. No need for anything else...

def to_full_inches self.round end def to_full_ftin arr = self.round(0).divmod(12) "#{arr[0]}'-#{arr[1].round}\"" end Last two methods to complete the class. So that entire ceiling_height: require "FloatExtended.rb" (ceiling_elevation-floor_elevation).to_full_ftin + " CLG.HT."

Here is my class FloatExtended.rb to be placed into C:\Users\<name>\Documents\Chief Architect Premier X# Data\Scripts class Float def to_ftin(n=16) arr = self.divmod(12) inch_frac = ((arr[1]-arr[1].floor)*n).round.quo(n) result = case inch_frac when Rational(1.0) "#{arr[0]}'-#{arr[1].ceil}\"" when Rational(0.0) "#{arr[0]}'-#{arr[1].floor}\"" else "#{arr[0].floor}'-#{arr[1].floor} #{inch_frac}\"" end result end def to_inches(n=8) inch_frac = ((self-self.floor)*n).round.quo(n) result = case inch_frac when Rational(1.0) "#{self.ceil}\"" when Rational(0.0) "#{self.floor}\"" else "#{self.floor} #{inch_frac}\"" end result end end Using it is very simple, this macro would be two liner. require "FloatExtended.rb" width.to_ftin or 209.to_ftin For your case the line "#{self.floor} #{inch_frac}\"" needs to be changed into "#{self.floor}" + "/" + "#{inch_frac}\""

You can not block walls. You can select exterior walls with roof planes and rotate them as much as you want. Attached windows and doors will move with the structure. I do not build foundation until the end after roof planes are set, software in general does good job deriving the foundation.

I have his on my pet peeves list. Chief: Fix this so it is easier to drag collapse, or adjust dimensions. And this rectange does not oddly moves sideways....

>Characters in a string are numbered 0,1,2,3,4,5...... Techncally these are not "characters", it is an array. ...and divmod produces array of a quotient and modulus. There are typed as Float's. See http://ruby-doc.org/core-2.3.0/Numeric.html#method-i-divmod One can also do a,b = width.round.divmod(12) I recommend you to create your own extended class Float and save it into 'FloatExtended.rb' under Documents\ChiefArchitect v8\scripts. This will allow You instead of putting dreaded logic in every macro to use include file... require 'FloatExtended.rb' //after that you couldimmediately use... width.to_ftin(16) //instead of a giant macro you now can use one liner

You can get it from dbx the roof plane Ridge top height, or do story pole dimension from cross section.

I am not at the computer, but I believe chief allows you to remove any dimension on the story pole by collapsing them, drugging them up/down to the next marker.

Giant pain, if you ask me. I did it using shp files. Following this method.

The wall does not show up, or stucco? Did you try Material painter or object painter. You can have stucco wall painted Hardie and it will still show as stucco...

Thank you Obviously if you have 48 ft wall that should be framed in sections of 12', chief architect under-counts 3 studs in addition to likely to report 2 x fir plate 48' or 1 x pt fir plate. (not sure) If I am framing in length of 8' - it will under-counts 5 studs / per wall. Chief really need to allow to specify wall framing section length. And draw it on the model. Here is Buy List... >And I'm not sure what you mean by framing looking "way not realistic". When was last time you have seen a house framed with 46' sections of wall. Would it be stable enough to lift. Where would builder get 46' 3" fur plate?

Hmm so calculate materials from all floors is unaccounting for a stud every section

This is something that is probably easy.. 1) How can I tell Chief architect to frame 46' wall into 96" sections. And because estimating lumber part is not estimating properly. In addition framing looks way not realistic. 2) If I move windows header 1.5" from the top plate, would Chief architect figure out to use solid 2x4 or 2x6 instead of top cripples? B

>Set stud spacing through Build Framing dbx. Select the desired wall(s), Build Framing For Selected Object(s), open Wall Specification dbx, click on Structure tab and check Retain Wall Framing. I did not like that method at all. It would require building a few walls at a time. No way to identify that the walls had a different spacing. (This is my hobby, I do not sell plans, however all my houzz/castles structures are sound). Defining the wall type using textures is a way to go. Not only it allows me to specify stud spacing but also gives the ability to specify a color on the plan. Thank you, thank you, thank you.

Thank you

Thank you Very odd. Yes you are 100% correct, one can define either 16" or 24" spacing using texture field, defining new wall type 2x4 Fir stud 24". Great. I have no issue with the concept that 16" and 24" wall have different wall types. But you only have choice over fir stud 16" or fir stud 24". Try interior 4 @ 19.2 o.c.? How about 12" o.c. (Softplan does this) Also chief has the type "Fir framing", but does not seems to understand what fir framing is or may be it is me....? B

Can you specify that two story wall to be [auto] framed @24" o.c.[because of 2x6s] unlike other load bearing walls that framed at 16" [2x4]. Like where straight 2x4 x 20' not available. Can you specify that some internal wall should be framed at 19.2" o.c. or even 24" so that duct-work can be run inside. Just curious.

They should all be on Electrical layer set using electrical annotation. There all other symbols, dimensions, roof planes, furniture, framing, etc details should be turned off. [i keep furniture on during the design] Same I never turn on electrical on the default layer set. Layout dedicate separate page or two to electrical.

I must be doing something wrong.....

Thank you. I can changed it to round [no steel option there], so I painted it red. Just wished Chief had Lally /Jack Post in the library.

Does library have realistic lally column / floor jack? If not does anybody has library symbol?

Open your plan, 1st floor. select closet, open properties. In the structure replace Floor © value of 18" with 83 1/2". Enjoy

try selecting the wall that you are trying to move and click on the temporary dimension that you are changing.