DeLayDesign

@BillsburgChief I get frustrated by it too. They never seen to work for me when I try to do them as an interior feature. If I'm working on a Deck they seem to work fine...

I need to show one room with a different O.C. spacing than the others. Typical for the home is 16" O.C, but one room in particular needs 12" O.C. I've only been able to find the 'global' option to change the framing parameters. Am I over looking something or do I need to draw this room's framing 'custom' T.I.A.

Thanks! That's what I was hoping to avoid, but was doing all along. It would be nice for Chief to add this function to the deck. Just a check box that tells chief to build it like it's not against a wall. Ah well. Thanks again.

Hey all! I have a client who needs to represent a deck as a freestanding structure but is butt up against the existing home. No matter what I do I can't get chief to understand what I want done so it will place the footing correctly. Anyone have tips on how to accomplish this? TIA

I took a more drastic approach. I uninstalled Chief 23.4.0.12(the newest update) and re-installed the previous version (23.3.0.81)... and all the issues I had went away. I now have zero lag! I have informed Chief about the issue. I think they may need to issue a patch, but I'm going to stick to 23.3.0.81 until they can confirm the issue is resolved.

... development - I think it's an 'arched' wall I have in the plans. When I deleted the arched wall the plan seems to not lag as long. I still get about 5 seconds worth of lag, but not anywhere near the 20-40 seconds I was with the wall in there... Coincidence?

whenever I enter a 3D view in this plan or adjust something this plan, Chief goes into Not responding...

It just doesn't make sense. I was working on the plans for about two hours, then suddenly the issue started. I've drawn 10,000+ sq. ft. homes without this issue in the past... this house isn't anywhere near that size and isn't as complex, so what the heck is going on!? God I hope Chief has the answer.

I've updated my chief to the latest verson. My Geforce RTX 3080 is up to date, but for some reason in this one drawing anytime I do anything to the drawing in 3D I get lag! No matter what mode I'm in. It will process for 20-30 seconds at a time and sometimes longer. I've reached out to Chief to see what the issue might be, but does anyone have any recommendations. I promise I don't have anything crazy in the plans or a lot of materials. It's so frustrating!

This client wants to see and be able to move around their home which is almost 10K sq. ft. plus their plat to make sure their new addition doesn't interfere with some elements on the property they want to keep. Any thoughts how how I might accomplish this? Right now the 3D view is saying my plans are 348 MB so trying to bring it down to 50 is going to be impossible.

According to Chief your file has to be less than 50 MB; This file is far more than that.

Hey dskogg, You should be able to access your Chief account and download whatever version you need of the catalog again. Do you have access to the catalogs?

Hey Users! I'm familiar with the work around of creating a box and adjusting it's shape and filing it with a transparent fill to create some articulation on an elevation or cross section in order to show things in the background lighter... or utilizing the shadows to help create the feel of distance between near and far objects; but does anyone know if there is a proper way to do it... easily? Is this a feature Chief can help us get!? TIA.

Yep. I got notified, but I'm bummed they didn't solve the issue with mulled interior doors w/ windows above them.

Hey All! I've used Chief for 13 years and in all that time I've never had to use the 3D viewer. However a client would like to. Their property is enormous. The home is already huge, and they want to add additional spaces to it. I follow the tutorials on exporting the model for 3D viewer, but I am getting an error message when I try to open it saying there isn't enough memory? I've contacted Chief about it, but does anyone know if there is a work around? TIA Adam.

OK. Ignore this. I found the settings (THE VERY FIRST THING in defaults)... Carry on.

I've managed to sort out the settings I prefer for my physics based renderings and I'd love to save the perimeters as a default so whenever I go to this specific rendering technic I don't have to do the set up every time. Does anyone know how to save my changes to the camera in my template? I know I can change my default but that appears to change the 'full cameras default' so whenever I do a full camera it always starts up as Physics based, but doesn't keep any of the lighting or technical options I've adjusted. TIA everyone.

Good to know! I'll have to give this a try. I do notice the OSB isn't inline with the foundation though... I wonder if offsetting it the negative osb thickness if it'll push my sill plate over. I'm thinking no, but maybe.

Awesome. Thank you for taking the time to do this! It was very helpful. I felt inclined to leave comments for you, but everything you said was spot on.

Strange. It honestly won't work for me that way, which is why I ended up trying to negative offset like Chief has in their template file. Below is what I get by changing it back so the foundation aligns with the osb with no negative offset. (nothing changes)

True. The offset matches the thickness of 1/2" OSB, which matches how Chief does it in their default templates. If I take the offset off, it will push the wall our the 1/2" not aligning the OSB with the footing below. I think I may have to do as other have suggested and just rebuild everything

Thanks @rgardnerbut unfortunately both walls types you show are not correct... for us anyway. The new Architect want the plywood exterior face to line up with the exterior of the concrete, which I've been able to do... but if you look at my sill plate, it won't move over for the OSB. Chief's default wall type from another template seems to work fine, but for our custom template we've worked with for years it doesn't want to allow the OSB to sit on the concrete.

Template Adjustments.plan It isn't so much a plan as it is me trying to fix issues our Architecture department has been ignoring for along while. We plan to move to X13 as a whole next week and I want to get the template fixed long before that. I've attached the simple template file. I appreciate your help. These are legacy files brought up from X9. I'm really hoping I don't have to rebuild all the wall types we've already established. Template Adjustments.plan

Hmmm. Am I missing something? The only difference I see is what I need my dimensions to dimension to.

This is what I need (which is how Chief's American Causal Template comes) This is what I'm getting. (Notice the sill not moving over for the OSB. I've checked both the American Casual Wall structure and my wall structure for my template and they are identical with the exception of thicknesses of products. Any suggestions?