5FT-20Designs

Thanks for the symbols.

These are the Pot & Pan Organizer and Sliding Shelf inserts based on Timberlake Cabinets. Should work with any cabinets. Keith Timberlake Inserts.calibz

Just finished talking with Tech. If you have multiple moniters, you have to change all of them to 100% scaling, close X14 and reopen. This worked on my system.

Sorry for not making my question clear. I understand that i can supress the labels and that's what i did on my plan. Why do I need to suppress the labels when my fixture schedule specifies callout only? If I select label & callouts or labels only, the display is correct. But when I select callouts only, the dw label is still visible/ Is this because it is in a cabinet? Other appliances in a cabinet seem to work

I want to suppress the label and have just the callout.

Had a similar issue with X14 Beta that was a bug, were the fixture labels had to be suppressed for callouts to work. This plan is using the default X14 template. The fixture schedule is set to show callouts, everything works except dishwashers. What am I missing? Thanks in advance for help. Keith DW CALLOUT.zip

Robert, Thank you for the help.

Attached is the reduced plan. Keith Dimension Issue.zip

Eric, When i zipped the file it was larger than 14mb. I'll narrow the drawing down to just the wall and submit.

When I pull a dimension from the bottom of the microwave to the top of the oven, the dimension isn't showing. Still shows the drag handles foir the dims. Seems to be an issue with my microwave (Mfr JennAir) since the oven deminsions correctly. Thanks, Keith

Thanks Robert

Just looked at your stuff, nice.

Need an Old Smokey style of grill for an outdoor kitchen. Looked on 3D warehouse, but couldn’t find anything close. Thanks in advance.

Make you line invisible under the Callout Label Specification.

Brent, I purchased two of these a couple years ago and haven’t had any issues. ViewSonic VP3268-4K 32-Inch

I’m a big fan of This Old House. This made me laugh when the host, Steve Thomas, did a story on the latest for visualizing a space. Cost, $1,000 for 2-3 printed pictures. November 1991 Season 13, episode 11 “The Wayland House”

Barton, That's the cure. I knew it had to be something simple. Thanks for the help. Keith

I am adding several offices in a large room that has a suspended ceiling. The office walls will be 8ft and open above that. Right now I have the walls defined as a pony wall with the lower wall as a Interior-4, 8ft high, and the upper has a blank wall created from air. When I create a camera view, the suspended ceiling is cut from the blank wall going to the full ceiling height. Right now I do not have a roof built so it is easy to see. I've tried a half wall (solid railing) that works except when I add a door, there is no header and the casing goes the full 8ft height. Added a soffit above the door frame does not help, the casing still goes to the top of the wall. Any help would be appreciated. Thanks, The ceiling is about 20ft high with the suspended ceiling at 12ft.