Designer100

I cannot get a prelim plan to zip to upload for this site for help. says to large and only prelim.

David thank you for your help.

I cannot solve Section Elevation 7 issue. Sloped clg is does not look correctly. There will be beams follow roof rafters also. It is showing something wrong on wall also. Thanks for any help Cheif x8 Newell newell.cheatheam@gmail.com 281.392.3034 Rod Home 07.08.2016.zip

Front Elevation or Camera 44. 2nd Level above first lever roof wall facing front of house on 2nd Level on right siden (front) and partial left side 2nd leverl wall is not showing the hardiplank. Kitchen has stone around range.maybe this is messing things up. Also front elevation is not showing right. It has a 11 ft clg same as interior. (not showing that) Don't know. I would appreciate any help correcting this issue. Chief architect x8 Rod Home.zip

Thank you for help.

Exterior Rear Elevation (left) is showing stone columns stopping at 2nd level btm of deck then from deck to top of eave. I need it continuous. need sloped clg at 2nd floor veranda. Chief x8 any help would be appreciated. Rod Home 5-13-16.zip

1. all I like in finishing up this project const. drawings is a roof over porch/entry. It needs to be 6' wth x 3' dpth. 9' or 8' clg with gable roof. Any help would be appreciate. 2. cannot get cross section to show roof at 12 ft plate (it is higher) and joists at the 12 ft plate. Thanks if someone can assist. Cheif x8 windows 10 BATH HOUSE 1 .zip

How do I upload a picture. not letting me. Also says file to big to upload in chief.

Chief says to large and it will not let me upload a zip file

2nd level balcony floor decking is not showing up and It will have a roof over the rear of the balcony but not the side. Can anyone help. Chief x8 windows 10 .

Thanks for all the help. I solved the issue

1) I NEED 2ND FLOOR BALCONY WITH ROOF OVER REAR VERANDA WITH EXTERIOR STAIR ON THE EXTERIOR OF WALL ON KITCHEN SIDE OF TROPHY ROOM, CANNOT FIGURE IT OUT FOR JUST THAT AREA (HOUSE, it IS NOT 2 STORY. 8 FT. CLG. All I like in finishing up prelim. plan. Windows 10 chief x8

The rear plate line of this bldg is not all the same slope. All roof is not sitting on plate line. has 9 ft dropped ceiling on interior with 12 ft eave ht for metal bldg. Roof is surpose to be metai. I have changed in material and it still does not show. Any help would be appreciated. Thanks Bath House.plan RV Bath bldg 36x24.layout

Can someone assist in telling me how to remove walls that project into the room with domer that are slope up to room ht. I used automatic dormer to create.. I need to hid the part that does that. Make invisible or something. any help appreciated. Thanks Suttles.James Remodeling 04.2016.plan

I cannot find the ignore tope (2nd) floor in the build roof dialog box?

Roof Issue - just domers need to show on new second floor plan. It is Showing new roof over part of new second floor. Need the walls to just go to bottom of Plate line of existing roof joists.. Can any one help? Would be appreciated. Newell newell.cheatheam@gmail.com Suttles.James Remodeling 04.2016.plan

I was allowing floor for existing ac in attic now. you just need 6'8" clearance per code for step to clg.

Hey guys, I would appreciate any help on this prelim. plan remodel on why my stair is not finding the 2nd floor I adding 2nd floor under existing roof with dormers for egress and chief with automatice roof is putting a roof on part of the second floor and not showing one of the dormers. I need the second floor not to show thru and the roof to slope thru and be lower plate where it is lower than 8' plate. with only the domers showing on 2nd floor. Any help would be appreciated and advise if that is okay. Thanks. Suttles.James Remodeling 04.2016.plan

I do not want to delete all layers to have building set on existing sidewalk paving at 0 level. not floor below does not solve the issue. Can anyone help.! I want floor on sidewalk.

Does anyone have a commercial drink dispenser 3D cad dwg that they can share with me? I need for a hotdog stand. Thanks, Chief x8 Windows 10 newell.cheatheam@gmail.com

I need floor of this project to be direct on sidewalk of Mall (w no floor) with 6"x6"x1.5" (I think) thick rubber mat. Can somone assist me. Trying to have this ready tomorrow for client. Anyone have a stainless steel 3D commercial Lavatory hand sink 17"x 15.5"x8". i Need floor to be at zero. I unchedked floor in room def. but it is still 12" above grade. I need the floor at zero. Chief x8 Windows 10 Thanks, newell.cheatheam@gmail.com Frankys.plan

solved just go to work on semiarch roof and glass and metal front.

can anyone assist. across the front of this kiosk. I need 2' - 15' - 2' . all the sides and back need to stay as they are. I have locked sides and rear. but cannot seem to get it to change the 2 angles to 2' w/o changes other walls? Also this si to have a 12' maximum ht semi- arch roof across the front. ceiling inside is to be 8'. I made defaught 8' ceiing inside. do I make the rest of ht wall 4' to fit under arched roof to be attic. Also going to be metail roll up door openings at 15 ft and the corners client wanted to roll up, but then I do not think that would work. Do anyone have a roll up 3d door I can use. it would be above the 34" counter that will overhang 14" out from the wall under rollup doors (windows). Help would be appreciated. Chief Architect x8 newell.cheatheam@gmail.com Frankys.plan

i am trying to design a pole shed roof. 6 - 4"x4" treated posts w/ treated 2x4 on 3 sides treated open 2x6 roof joists with metal roof (open on front and back) Just a cheap horse shed for a friend. going to be open dirt for floor can anyone help? see attachment Newell chief x8 windows 10 newell.cheatheam@gmail.com POLE SHED.plan

So can anyone help with these issues.