-
Posts
868 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by RobUSMC
-
-
-
I've had this happen all the time in the past. Someone suggested to clear the clipboard. As soon as I did all worked fine. Now I have a clear clipboard icon on the quick launch bar and when this starts I click the icon and all is good..
-
I deleted the bow window completely, started over and inserted a new bow and entered the width and depth. Looking at it in both plan and camera view the windows show to have no framing between them but as CA default they are only 36" tall. I select one of the windows and changed the width to 22" as I need and all i still ok...but as soon as I changed the height to 72" it automatically is putting framing between each window and narrowing them to 11". I dont have a clue. Bug, operator error, I shouldn't be working on a Sunday... Im at a loss
-
Lets try this again. Closed plan then zipped
-
No. I am using a bow not a bay
-
Here is the plan
-
Eric, If you see my attached screen shot I have those selections made
-
Connect outer casing is checked. I can tab and open one of the windows but it will only resize to a max of 11" wide where I need 22" wide which they would be without the framing between them
-
I am trying to draw a 5 unit bow window without any framing between each window (See attached pic) After I insert ans size the bow then resize the actual windows it still shows framing between each window. I have checked the box "No framing between components" but no help? Im I just missing something or is there a trick? Thanks for any help.
Rob
-
I didnt see that before. thanks
-
Have been a Chief user since 8.0, have always paid the SSA for two license and felt I got what I paid for. Seeing this occur seems it could just be the tip of the iceberg. Extra charge here and there (for now) whats next??? Hate to see it happen to loyal users over the years. It's like others have said, we are SO vested in Chief that the thought is we wont go anywhere and bow down. Maybe some will, some wont but why should it seem shady? Next we will have to enter a dime in the slot to ask a question on Chief Talk.
-
-
-
-
I just loaded X8 onto my laptop ive been using for a while now and every time Ive tried to open X8 and now X7 I get a message that I dont have the admin rights. Im the only user on my laptop, only my account and im set as the administrator. I only get this message when trying to open X8 and now X7 which ran fine up to now. Has anyone had this issue. May be a PC setting but I am the Admin but Chief says i need to have admin rights to open????
Should've noted i have Windows 10
-
Average $100-125K kitchen, I'll spend anywhere from 20-30 hours
-
I have noticed a substantial lag time when going into a few CORE libraries that was not there in any previous version. The main one is light fixtures. There has always been a longer lag with user libraries Ive imported that are large such as Kohler, GE and similar but never had these lags in the core libs.
-
Would it be out of the question to start a topic where we could upload a copy of our layer sets for sharing? I do 100% remodels and would like to see and compare how others have their layer sets set up. Just a thought but I'm sure someones set could help someone else save time and energy. If so. I will upload mine.
- 1
-
-
Thank you SO much Ray & Scott. I had search CA vids before posting but I guess missed it. Merry Christmas
-
-
I had to almost do a strip search but I found it. It was a very old wall type that had an obsolete exterior finish. The only reason this happened is due to using a 5 year old plan but it still saved a lot of time. Anyway it would still be nice to be able to look at the plans material list and see everywhere that a particular material is being used.
-
I am reusing an old 2011 plan for a new project that has the same exact floor plan and there is an old brick material in it and whenever I render I get the statement that it can not find the pattern or graphic file for that material. I have searched materials for the floors, wall layers, roof and everything I can think of and cannot find where that materials is being used as I don't see it in any of the renderings but it is shown in the plan material list. Is there a way to show what materials are being used where or on what object, surface, etc? Thanks
-
I've had the issue of when I've imported a PDF image into a layout it looks fine on screen but when I either print the plans out or email the plans all the PDF images are extremely blurred and unrecognizable.
Floor Height
in General Q & A
Posted
3d Warehouse https://3dwarehouse.sketchup.com/model.html?id=f2350b1a2c30165769fb38085fbc320c