Mark3D
-
Posts
489 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Mark3D
-
-
-
Check out the symbols and content section of the forum
-
you have a terrain break drawn ontop of terrain break another near window number 2 zoom in you should see it, with elevation data layer I change line weight and color to stand out so i can trouble shoot
-
Often you only need the major contours from the cad plan
-
Delete roof baseline polylines go to edit menu delete objects. then select roof baseline polylines.
-
Start with auto roof then with tricky bits adjust manual edit roof plane.
-
Its not like a cheap price has been paid to use the software over the years has been paid it was fare money and then to be told it is now worth nothing thats what it looks like when big business has it way and says stuff you to its existing
-
A screen shot would help as i cannot see problem, plus update you signature to x14 it will help save time for those trying to help you
There is framing blead through if it is that turn roof framing layer
-
15 hours ago, Rich_Winsor said:
Aye matey, there's the rub. Xfrog.com has thousands
but they tend to have high surface counts. They also
have some free samples so you might want to give
some a try and see how they perform for you. Here
is a quick PBRT comparison between a Chief 3D tree
and a Xfrog tree. These were both Ash trees and seem
to be striking eerily similar poses.
thanks for the example
-
Has anyone found 3d plants and trees to buy that are not to high surfaces and suitable for chief i have chiefs bonus items but would like more
-
Here is file with fixes if it helps
-
-
Have a look at this file and see if its works for you
-
If you are ever struggling with 3d model side of things just send me a private message, I can zoom or other to help
- 1
-
When exporting use a higher resolution like 2048 you will get smaller grout line
-
Here is a quick go at it to help you
-
what version of chief are you using
-
I had a go at it but i don't think it is quite right but the idea is there i would start again with a single stair unit and landing you have 2 stair sections and i am not sure why
-
can you show all 4 elevations
-
See if that is getting you on the right path
-
Select all the walls that control the roof over those 2 rooms and set roof settings that should fix the problem is you have multiple pitches 3 in 12 and 4 in 12 also you have some walls set to extended down slope the just need to be set to hip and 3 in 12 possible
-
solver has some good videos on dormers
-
See if this is what you want its done with auto roof
-
I opened your file in x14 rtrt and x13pbr and don't see wall color problem
Strange Roof/Wall interference.
in General Q & A
Posted
Try unselecting higher eaves boxed see if that is a good fix