DRAWZILLA

Too bad I like the shed man. Well if he has gone on to Revit, he will be back.

Try hitting F12 after you do things, that seems to refresh things for me, not sure about the materials list though as I never use it.

Joe, I have been wondering the same thing, hope she's ok.

Scott, you are a wonderful person aren't you

Are you leaving us?

It can be done, there are video's on this that Scott did. chieftutor.com

I know everyone won't like this but, If you are running slow it could be a setting within the program, or your computer equip. Some other thing that could slow you down is round detailed railings, symbols that have a high face count and very large terrains. There probably are some bugs, but at this point they are not slowing me down that I know of. Check your settings, go back to the default and start over.

The slowness with 32 bit will come into play with large plans--32 is just not enough (3GB) available memory sometimes. 64 bit lets you use a lot more memory.

The rake board has always been the gable end for me also.

That usually happens when your walls aren't connected properly. Try to break the lower walls at the two points where the dormer wall meets the lower wall.

I think I am going to install an SSD drive, that will really speed things up for me.

looks to me like your garage floor height could be at "0" when it should be "-?" a minus number. If it is, try hitting F12. Check your floor heights in each room or you can post the plan to find out exactly what's wrong. I always draw my walls 1st and second then adjust floor

heights, working from the top down, using floor defaults DBX or set these up before drawing them.

See if you have an updated Print driver for that plotter

Could be a lot of things, it depends on how you did your wall or roof, Just no way to know what you did without posting.

For me its a shadow board weather its on a rake or a fascia.

Use the landing tool, create the bottom, then concentric copy and raise the height of the 2nd landing to whatever your riser height is.

That just looks like a statement to me ,Does it work ?

Open up Adobe and use Repair setting, it will reinstall the driver and links portion for your computer. Sometimes I have to do that also. And make sure you have selected adobe PDF in the printer selection.

Along the Beach here, we typically have 25" wide lots and 3' sideyards

I also get that but, sometimes it works as advertised. Wish I knew why. 

The NVidia driver you show is an old one.  296 is old they are up to 335 now. Try updating it

Every city has there own standards around here, you have to go to their website and look it up in the zoning code laws or the municipal codes.

Wish I could help you but its Greek to me, I never send any plan files out, just locked PDF's

It' here

3d moldings will have a lot of faces. See if there is a 2d molding that will work.