mtldesigns

Paint Issues On Wall At Railing Intersection

Recommended Posts

Right at this railing, the color of the blue wall does not extend to the end.  However, when I delete the railing it does.  Obviously I need the railing, so how do I fix this?  I've painted the wall in camera view, in perspective view, and thru wall specification to no avail.  I've also attached the plan view showing the intersection.

post-4747-0-32739000-1455505142_thumb.jpg

post-4747-0-62877300-1455505438_thumb.png

Share this post


Link to post
Share on other sites

Interesting.  Have you tired deleting the wall and redrawing?

Also. wall material region could work.  Would like to know

what is causing it.  Maybe post the plan or a stripped down

version of it.

Share this post


Link to post
Share on other sites

Also, try moving the angle of the camera a little and see if that helps.

Share this post


Link to post
Share on other sites

Finally got back on this tonight.  Yes, I have tried the multiple camera views and nothing works unless I delete the railing.  I also deleted wall and re-drew.  That was fun, just to tell you. :-)  For some reason all of my moldings (base and crown molding got flipped to the exterior walls, but the walls did not flip...go figure.  I am leaving this as is for right now.  Its just paint, right.  When I do ray traces, I will get around it.  Need to get this one wrapped up.  Dennis, I made a mental & sticky note to come back to this when design is complete.  If I can't resolve (just to know why it did this for future) I will send plan your way to play with.  I was just hoping it was a quick fix is why I asked the question last night.  Thanks gentlemen.

Share this post


Link to post
Share on other sites

Just a follow up.  I sent pictures to tech support and now they have my model to see why my end of walsl weren't painted. Actually, I noticed in other places as well.  The first pict. I attached is the same wall as my original comment, but now both ends are messing up.  The other picture is an exterior wall, on the first floor..  don't know what's going on.  But will keep all informed on what I find out.

post-4747-0-18394300-1455757386_thumb.jpg

post-4747-0-47879500-1455757393_thumb.jpg

Share this post


Link to post
Share on other sites

Can you possibly attach the plan here?  I'm suspecting you might have some issues with your wall definitions...zero thickness materials maybe?

Share this post


Link to post
Share on other sites

This is CA Tech Supports message to me today.  I made sure it wasn't operator error when I sent my case.

 

"Nope, not operator error. We could reproduce (the same issue) on a completely new plan, set up with similar conditions. The developers will be taking a look at this issue and prioritizing when it would be in an update of the program. I can't guarantee exactly which update that will be at this point. However, if they need any additional information I will be sure and reach out.

Thanks again for letting us know of the problem!"

Share this post


Link to post
Share on other sites

CA's solution until corrected:

 

In the meantime, I would recommend using a custom backsplash on the walls that the paint is overlapping the edge. Add a custom backsplash in 3d view by going to Build> Cabinet> Custom Cabinet. Click on the wall and then adjust if needed to the edges of the wall. Next, open the Custom Backsplash Specification and set the Material Layer to 1/16". You can then change the material to you blue color. This should cut around the doors and cut correctly at the edges of the wall.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

  • Member Statistics

    27825
    Total Members
    6254
    Most Online
    ChiefDallas
    Newest Member
    ChiefDallas
    Joined