How to force Chief X17 to build this base corner blind cabinet?

[GeneDavis]

I think I've run up against hard-coded behavior in Chief's cabinet tools (blind cabinet face items) that won't let me do this.  See the picture.

 

Chief won't build me an applied blind panel, nor will it let me control door width.

 

A  no-toekick frameless base cab of 32" width needs a flush panel (3/4" painted plywood, edgebanded) over its blind end at the size shown, with the door, which is hinged off the panel, sized as shown.  I show where the cabinet bears against the adjacent run of base.  Note the door's top reveal, which is 3/8", is not repeated for the flush panel.

 

How is this done as a forced-build that when placed, retains, locked, all its face elements built per this spec?

 

 

[CarrieS]

Not quite perfect since the reveal applies to the panel but close-ish.  I used "Slab MDF Door" so I could see the edges but if you use a regular slab door the separation and the panel will merge.

Spec Cabinet.plan

[MarkMc]

Not at computer now. 

Cabinet framed, 3/4" separation, turn off auto build blind. Set cabinet reveal to 0, then increase where needed. If it won't let you use opening. Copy rename slab door. The rest should be ex. 

[GeneDavis]

Thanks @CarrieS!  I had not made it clear in my model that the fixed slab panel to the R of the hinges is one piece.

 

The colored area and dimension is there to show exactly where the adjacent basecab butts to the blind.

[CarrieS]

I initially thought that but then I saw the dimension and second guessed myself  Just like me to make it harder than necessary.