Joe_cul Posted May 3, 2023 Share Posted May 3, 2023 Why is this soffit up so high? Link to comment Share on other sites More sharing options...
richoffan Posted May 3, 2023 Share Posted May 3, 2023 It looks like they are auto trusses and your heel height is set to otb default 12" Or you raised off the plate but most likely the heel height. Open the dbx for build roof and change the heel ht under roof ht Link to comment Share on other sites More sharing options...
richoffan Posted May 3, 2023 Share Posted May 3, 2023 Just looked closer... not sure what would move the soffit panel - sorry Link to comment Share on other sites More sharing options...
Alaskan_Son Posted May 3, 2023 Share Posted May 3, 2023 Here’s a possible clue: Where is your sub fascia? Link to comment Share on other sites More sharing options...
SHCanada2 Posted May 3, 2023 Share Posted May 3, 2023 try: open up the truss and check rebuild Link to comment Share on other sites More sharing options...
Joe_cul Posted May 3, 2023 Author Share Posted May 3, 2023 Solved: The roof plan is on the first floor. Next to it is a two-story section. When the plan touches the two-story section, the soffit jumps up like shown in the picture. Just had to use the break line at the soffit overhang and then move the roof plan against the second story section. thanks everyone for looking Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now