scottb613 Posted June 12, 2021 Share Posted June 12, 2021 Hi Folks, Anyone have experience with this type of product - does it hold up well over time ? I looked at one home that had it and there was significant water damage to the siding after just a few years. This was the specific product I've been interested in: Fiber Cement Lap Siding | Allura USA Thanks. Regards, Scott Link to comment Share on other sites More sharing options...
andr0id Posted June 17, 2021 Share Posted June 17, 2021 Allura recently lost a lawsuit that alleged they make the product from fly ash and that it breaks and shrinks. https://considertheconsumer.com/class-action-settlements/allura-fiber-cement-siding-settlement-2021-start-to-claim-the-12-5-million-settlement-rebate-now Hardie has had problems and lawsuits too, but after some reading, I'm going to avoid fly ash products on my new home. Much is (probably correctly) blamed on incorrect installation. It's not hard, but failure to read the documentation and just nail it to the wall will result in the clearances and nailing being wrong and possible water damage to the siding or structure. Wrong nail pattern, nail over-penetration and incorrect spacing between planks and panels and incorrect caulking seem to be the biggest offenders. I think we're going to go with Factory painted Hardie CedarMill. Then I don't have to rely on somebody that may not paint it correctly. Good luck on your hunt, I'm not sure anything out there is 100% perfect. 1 Link to comment Share on other sites More sharing options...
scottb613 Posted June 18, 2021 Author Share Posted June 18, 2021 Hi… Thanks so much - that’s certainly worthy of consideration and gives me pause. Hmm - yeah - maybe I’ll just bite the bullet and go with wood siding that I’ll have to have stained and sealed every few years? This is for my retirement home that I’m really trying to make as low maintenance as possible. This was a home I had looked at that had the Hardieboard with water damage - not all over - but a few spots where the water was consolidated and ran from the roof onto the siding. It wasn’t very old. I didn’t purchase it and I’m building from scratch now. Regards, Scott Link to comment Share on other sites More sharing options...
Chopsaw Posted June 18, 2021 Share Posted June 18, 2021 I am not so sure cement board is the greatest product in the north east or other places where the climate is cold and damp. I asked a question about submersion and got some good advice here a while back. 1 Link to comment Share on other sites More sharing options...
rgardner Posted June 18, 2021 Share Posted June 18, 2021 You might check out LP Smartside (their premium pre-finished product). They have a stigma due to failures years ago but from what I have seen they have fixed the issues. https://lpcorp.com/products/exterior/siding-trim 1 Link to comment Share on other sites More sharing options...
scottb613 Posted June 18, 2021 Author Share Posted June 18, 2021 14 hours ago, Chopsaw said: I am not so sure cement board is the greatest product in the north east or other places where the climate is cold and damp. I asked a question about submersion and got some good advice here a while back. Hi. Thanks as well - more interesting feedback on why not to use it. When I looked at the Hardieboard site - the color from my above screen shot no longer looks like it's available. I didn't really see anything else that worked for the look I'm trying to achieve. Regards, Scott Link to comment Share on other sites More sharing options...
scottb613 Posted June 18, 2021 Author Share Posted June 18, 2021 14 hours ago, rgardner said: You might check out LP Smartside (their premium pre-finished product). They have a stigma due to failures years ago but from what I have seen they have fixed the issues. https://lpcorp.com/products/exterior/siding-trim Hi Ryan, Thank you kindly good sir. Hmm - I'll take a look. I did start looking at wood again - realizing the maintenance required. Again - similar to the look of Hardieboard but an actual wood example. I probably wouldn't want the rounded faux log cabin planks - preferring flat planks - I do like the knots. Regards, Scott Link to comment Share on other sites More sharing options...
Gawdzira Posted June 21, 2021 Share Posted June 21, 2021 Check out Kebony. Darker in color but has some very good properties that make for a long lasting material. https://us.kebony.com/ 1 Link to comment Share on other sites More sharing options...
scottb613 Posted June 23, 2021 Author Share Posted June 23, 2021 Hi Alan, Thanks - I'll look at this as well. Looked at your link for your business - some beautiful work there. Regards, Scott Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now