Renerabbitt Posted September 9, 2020 Share Posted September 9, 2020 I'd usually struggle my way through this but was hoping someone can help me out. This .plan file came to a screeching hault seemingly overnight. Every time I change anything in 3d it rebuilds at an extremely slow rate, unbearably slow. Any help appreciated. LV-N.planFetching info... Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted September 9, 2020 Share Posted September 9, 2020 Rene - Runs fine on my Spectra 360, just kidding. Yes it does run slow. Did a quick look and it's somewhere in the interior finishing elements, furniture, cabinets, etc. If I turn those display layers off it runs fine. Might be a model or a very high resolution texture. Will keep exploring if time permits. Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted September 9, 2020 Share Posted September 9, 2020 Rene - it looks like a cabinet you have with a fancy door system, does the material GOODWOOD RESAWN OAK -TURNED make sense. Something wrong there. Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted September 9, 2020 Share Posted September 9, 2020 Seems to be a few more items, bathroom vanity and a shelf unit in the shower. As I delete these items things keep getting faster. Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted September 9, 2020 Share Posted September 9, 2020 The two Pantry's, bathroom vanity and shower shelf are where the problem is. Once I deleted them the plan runs as I would expect on my Spectra 360. On your system it should be fine. Link to comment Share on other sites More sharing options...
Renerabbitt Posted September 9, 2020 Author Share Posted September 9, 2020 On 9/9/2020 at 11:14 PM, TheKitchenAbode said: The two Pantry's, bathroom vanity and shower shelf are where the problem is. Once I deleted them the plan runs as I would expect on my Spectra 360. On your system it should be fine. Expand You're the man!! It was the 2 linen closets like you mentioned..THANK YOU!!!! Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted September 10, 2020 Share Posted September 10, 2020 On 9/9/2020 at 11:37 PM, Renerabbitt said: You're the man!! It was the 2 linen closets like you mentioned..THANK YOU!!!! Expand You are very welcome Rene. Fortunately your plan was not overly complicated so it was not too time consuming to narrow it down. Cheers, Graham Link to comment Share on other sites More sharing options...
Renerabbitt Posted September 10, 2020 Author Share Posted September 10, 2020 On 9/10/2020 at 12:44 PM, TheKitchenAbode said: You are very welcome Rene. Fortunately your plan was not overly complicated so it was not too time consuming to narrow it down. Cheers, Graham Expand I was just getting started on it..and it is a full home remodel ..was confusing to me that it suddenly came to a crashing hault. I had at least a couple sessions with those cabinets so I don't know what changed. Thanks again Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted September 10, 2020 Share Posted September 10, 2020 On 9/10/2020 at 5:44 PM, Renerabbitt said: I was just getting started on it..and it is a full home remodel ..was confusing to me that it suddenly came to a crashing hault. I had at least a couple sessions with those cabinets so I don't know what changed. Thanks again Expand The only time I have had something like that is if I've used a high resolution texture and then in the texture DBX I had set the size to something like 1/16" X 1/16". As you can surmise, replicating a very high resolution texture that many times over say a 10 sq.ft. surface is a lot of work. Link to comment Share on other sites More sharing options...
Alaskan_Son Posted September 10, 2020 Share Posted September 10, 2020 Hey Rene, Your problem isn't the 3D object themselves but rather the material definition and the "alder_full" pattern you're using. Just the front elevation of that one hall pantry cabinet alone is producing 62,000 lines. Link to comment Share on other sites More sharing options...
Alaskan_Son Posted September 10, 2020 Share Posted September 10, 2020 By the way, your issue is just being exacerbated astronomically by the fact each one of those doors has roughly 2,000 faces. If one single projected plane is producing 62,000 lines, imagine all the lines being produced in a full 3D view. YIKES!! Link to comment Share on other sites More sharing options...
Renerabbitt Posted September 10, 2020 Author Share Posted September 10, 2020 On 9/10/2020 at 10:29 PM, Alaskan_Son said: By the way, your issue is just being exacerbated astronomically by the fact each one of those doors has roughly 2,000 faces. If one single projected plane is producing 62,000 lines, imagine all the lines being produced in a full 3D view. YIKES!! Expand All makes sense to me, just not sure what happened ..one day was working fine and the next was crashing,,,no changes in between..even went back a version and the same problem existed. I think maybe a material file got replaced at its core location. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now