TJDesign Posted September 15, 2016 Share Posted September 15, 2016 I am attempting to do an "as-is" drawing of an odd shaped building I'm re-designing for a client. It is one floor but one side of the building has 2 wall heights of 10' and on the other two it's 16' high with the ceiling vaulting up from the lower to the higher. I have looked at the Salt Box option but I don't have a 2nd floor and from what I can tell, the only way to change the wall height is to change the ceiling height, but since I don't have a ceiling, that doesn't work either. I'm new to the CA Interiors program and I think I maybe attempting a more advanced roof type so any help or suggestion is appreciated. I've attached a picture that shows the 2 heights coming together Thank you, Tami Interior Designer Link to comment Share on other sites More sharing options...
glennw Posted September 15, 2016 Share Posted September 15, 2016 Tami, Even though you don't have a ceiling in the room, the wall height is still controlled by the ceiling height. Raise the ceiling height and the walls and roof will raise (auto or rebuild roofs). Link to comment Share on other sites More sharing options...
TJDesign Posted September 15, 2016 Author Share Posted September 15, 2016 Tami, Even though you don't have a ceiling in the room, the wall height is still controlled by the ceiling height. Raise the ceiling height and the walls and roof will raise (auto or rebuild roofs). Thank you Glenn - I tried that, but since one side of the room is shorter wall height it doesn't end up looking right. Link to comment Share on other sites More sharing options...
MarkMc Posted September 16, 2016 Share Posted September 16, 2016 Can do that with a normal cathedral, just looks odd because the one wall is 45. Link to comment Share on other sites More sharing options...
dshall Posted September 16, 2016 Share Posted September 16, 2016 Thank you Glenn - I tried that, but since one side of the room is shorter wall height it doesn't end up looking right. Wow, Glenn has probably given you some good advice, this guy has never been wrong except when he suggested I order the halibut instead of the sea bass. Post your plan if you want an answer you can use......... I can't believe he recommended the halibut in lieu of sea bass. Link to comment Share on other sites More sharing options...
TJDesign Posted September 16, 2016 Author Share Posted September 16, 2016 Can do that with a normal cathedral, just looks odd because the one wall is 45. thank you! Link to comment Share on other sites More sharing options...
TJDesign Posted September 16, 2016 Author Share Posted September 16, 2016 Wow, Glenn has probably given you some good advice, this guy has never been wrong except when he suggested I order the halibut instead of the sea bass. Post your plan if you want an answer you can use......... I can't believe he recommended the halibut in lieu of sea bass. Thank you.... I must not have done it correctly then (I'm very new and this is probably not the best first project, but I'm determined). I'll see if I can figure out how to post it - thank you again! I would probably go with the halibut too, so there you go Link to comment Share on other sites More sharing options...
TJDesign Posted September 16, 2016 Author Share Posted September 16, 2016 Here is how to attach things. Make sure the plan is not open in Chief. a1.jpga2.jpg And here is a simple plan. TJDesign 1.plan thank you Eric Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now