Alaskan_Son

Michael,

 

That changed the wall outline in elevation view to dash. But in layout the lines are still solid..

 

I thought that the layers "Footings" & "Foundation" were where you changed the line style.

It works fine for me.  Did you make sure to open the elevation view from the layout and update it??

Jon,

I think what you're probably not doing is...

You need to change the line style for "Walls, Foundation"  for the dashed lines to show up in elevation.

It seems to work just fine for me.

If you change your "Schedule To Text", it will no longer update any changes.  Is it possible this is your problem??

Can you be more specific??

If I understand correctly, among other things...

1.  Open the garage room dbx on the 1st floor and on the structure tab uncheck "floor supplied by the foundation room below"

2.  Open the garage area room dbx on the foundation level and on the structure tab uncheck "roof over this room" and "floor under this room".  Also, change the "ceiling finish", "floor finish", and "floor structure" dimensions to zero.

There are probably other things you'll need to mess with, but with the limited information I have, that's what I can offer.

You're welcome:)

Michael,

 

I believe the setting that controls this is Auto Rebuild Walls/Floors/Ceilings.

I'm a little hesitant to say this because I know you're such a highly respected Chieh Architect genius, however...

I think you might be wrong.  Rebuild walls/floors/ceilings if checked might cause the gutter to rebuild, however the gutter will rebuild even if the box is unchecked if "auto rebuild roofs" is not also unchecked (both must be unchecked).

The floor of the attached garage on my house slopes slightly away toward the driveway (roughly, 10 inches over 20 feet)...

That does not sound like it would qualify as "slopes slightly" to me.  That would be the single most extreme garage slab slope I have ever seen.  Did you perhaps type those number incorrectly??

I didn't spend too long on it, but check out the attached plan to get a rough idea of what to do...(or what I would do anyway)...

There may be another way, but one of the keys is to open the walls around the garage (you may need to place some break points) and then under the structure tab check "go through floor below"

Test.zip

Mike, do you want to explain why he must call it a garage? Hey Mike, can't you see Russia from Wasilla?

Using the garage room type automatically sets the structure settings close to what the OP was after. 

And no, we can't see Russia from Wasilla :  ), although there ARE a lot of Russian people here.  We can however see Russia from one of the islands on the Aleutian chain.  There are 2 islands that are only about 2-1/2 miles apart.

Edit:  Sorry,  I guess I didn't look closely enough at the picture in the original post.  I didn't realize the slab was on top of the foundation.  You may not want to use the garage room type like I said afterall.  You can, but it will require just as much structure modification as any other room type (maybe more)...

Anthony, to expand on what Bill said...

After placing the break points near to where they should be, select a roof plane you would like to join to another, then select the edge you would like to join to another edge.  Click the "join roof planes" tool.  Now select the edge of the other roof plane you would like to join.  The other roof plane will highlight, but its very important you select the correct edge. 

I only spent a few minutes setting this up, but check out my settings.  Hopefully it helps.  Make sure you define your garage as a garage.  Adjust the garage slab through the room structure DBX on the foundation level. 

There's no data in that file you attached.  Make sure the plan is CLOSED before zipping it.

Gene, you can actually delete the gutter in 3D as well with the gutters unlocked.  I get the same results you do though.  The thing you need to do is turn off "auto rebuild roofs".

Has the slow dragging feature been changed or eliminated in X6? Used to be able to hit the shift key when dragging to slow things down.

I never liked that tool.  What I find to work way better once I learned about it was...

Hitting tab while dragging and then entering the distance and angle. 

Awesome.  Thanks for the feedback guys.

I replaced the symbol in my post above...Not sure why, but the symbol seemed to be corrupted.  It worked fine yesterday, but when I opened the program back up today, the materials on that door went totally wacky.  The door in the library went black and seemed to have none of the panels or framework. And the material tab had the right material NAMES, but the textures and patterns were all wrong.  To make matters worse, when I selected another library object and then went back to the door again, the patterns and textures had changed again and the door was 2 different materials (I think aluminum and oak) and then the door changed to all oak.  Extremely bizarre.  Has anyone else seen anything like that happen before??

If you could let me know how the attached symbol behaves for you I would appreciate it.  I think I fixed it but I'm not sure.  The door should by Cherry with the grain on each individual panel going in the direction it would be in real life. 

Like the attached screenshot...

Michael:

Looks good to me but what do I know about it. Will it only be used in one location/one size?

No, but it seems to resize just fine. At least for my purposes.

It shouldn't be too difficult to do in Chief.  It would probably take less time than searching 3D warehouse.

Please let me know how I did Symbol Master Joe

Okay...I made my first door.  Nothing fancy, but pretty close visually in case anyone else ever needs a similar door...

Untitled 3.zip

Sorry about that.  It was a mistake on our end.

 

It should be working correctly now.

Now it seems to be redirecting us back to THIS forum

No apparent problems here either.

You're probably right Joe, although making symbols like that aren't one of my strong suits. 

Thanks Curt.  I was hoping someone might recognize it so I didn't have to search through the zillions of doors in the Sketchup warehouse.

I'm looking for a particular door design.  Wondering if perhaps any of you have one or can tell me where to find it.  I've searched all the Chief libraries and can't seem to find anything.  Any help would be greatly appreciated.

Sorry, this is the best picture I have...