-
Posts
54 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by tinadelllic
-
Hello there, I had to create a library of a select portion of the Candlelight Cabinetry line labeled per their catalog awhile back. If you can use these "as is" or modify them for your own purposes - feel free Hope they help! (Can't remember which version of Chief I created this in - X14?) CANDLELIGHT CABINETRY PROJECT.calibz
- 2 replies
-
- 2
-
- cabinetry
- calibz files
-
(and 3 more)
Tagged with:
-
***Immediately Available*** I'm a Certified Professional Building Designer (CPBD) with 10+ years of experience in custom residential work that can take the project from ground zero to approved permit including full project development, construction plans, and submittal to building department for permitting available for per project or hourly work. Experience & Speciality Knowledge: - New Construction, Additions, Remodels & Full-Renovation - Single Family & Two-Family Homes, Accessory Dwelling Units (ADU's), Mother-in-law Suites, Tiny Houses, and Garage Apartments. - Wood Framing, Concrete, CMU block, EPS Panels, SIP, ICF, Timber, Brick Masonry (Wythe) and Lathe & Plaster - 2009, 2012, 2015, 2018, 2021 International Residential Codes - Foam Formwork buildings & EPS concrete sandwich composite panel systems - Historical Preservation & Old Home Design - Construction project management Design, Drafting & Consulting Services: - Construction Plans & 3D Renders created using Chief Architect and/or AutoCAD that are code-compliant and permit ready. - Custom design with opportunity for homeowners to collaborate during the full creative process - Integrative processes with your favorite subcontractors or builder encouraged to ensure your team starts and ends on the same page - Project feasibility evaluation and reports based on a detailed building & zoning code analysis to know what’s possibly with your property before you begin!. - Building department permitting & application submittal guidance - Plan Review Preparation & Comment/Redline Responses - Zoning, variance requests and HOA approval assistance and process management - Estimate Analysis & Contract Review **Virtual availability only or are you not able to find someone local to fit your needs? All we need to start is drawings of your “Before” space. I can provide site-measured “As Built” Plans created of your existing space with options such as on-site and virtual live measurement collection, self-measure using my guided checklists, video imaging scans like that offered by Matterport and more Typical Drawings Offered: Site Plan/Plot Plan, Floor Plans, Elevations, Cross-Sections, Reflected Ceiling Plans, Roof Plans, Electrical Plans, Plumbing & HVAC, Window & Door Schedule, Foundation Plan, Details, and Calculations such as Electrical Load, Attic Ventilation, UA Fenestration, Natural Glazing/Ventilation and more! Examples of work available and sent directly to you, just let me know what you want to see! If you have questions or want to discuss in more depth, feel free to reach out to me! Kristina (Henbest) Morsman 720-556-8789 Tina.N.Henbest@gmail.com
- 1 reply
-
- building plans
- stamp plans
- (and 6 more)
-
Best Practices for Storing and Applying Keynotes and Notes
tinadelllic replied to skoz44's topic in General Q & A
So my solution has evolved for things like this but now I have essentially two categories of .plan template files I use for new projects or for later phases of construction documentation; 1) Drawing Template, blank but with all my settings so I don’t have slow down from clutter from the below file type (2) 2) My Grab & Go - I have wall types drawn for easy copy/paste, basic furniture arrangements like dining room table/chairs, bed with side tables, etc. on the drawing sheet, recessed can lights in sets of 4 or 6, etc. so I don’t have to dig it out of my user library. These are all sectioned out with “Work Area boxes labeled “Electrical”, etc. I use this same thing with Note Types. I place all my note schedules in a row and right underneath I have all “Notes” stamped out below so I can skim through the schedule and copy over the keynotes that apply to that project. As long as you have the labels set to “simple schedule numbering” you just click “renumber schedule” once in your new plan and it’s done! Does that make sense? Someone may blow me out of the water with a more efficient way but it works for me! -
Ruby Script Item for Calculating Occupancy Load
tinadelllic replied to amddrafting's topic in Symbols and Content
-
There’s a combination washer/dryer (one unit like in Europe) in the compact appliances user catalog in Chief
-
Do conditioned unfinished basement rooms count as square footage
tinadelllic replied to GeneDavis's topic in General Q & A
I usually find there will be a distinction on submittal application forms between "conditioned area" versus "finished area" if its a jurisdiction where they place a lot of emphasis on sizing of Heating/Cooling units, so essentially where they ask for Manual J, S, & D for new construction, additions, remodels if you break the thermal envelope, or will replace the units. Forced air systems are sized for the entire house with air supply registers intermittently placed throughout the unfinished basement, which I speculate is because sometimes the basement is closed off with a door at the top of the stairs - sometimes its open to below...and this can be easily altered. "Finished" spaces, however are usually differentiated by completing construction such as framing a wall against the inside of the foundation wall, vapor barrier, cavity insulation, drywall, paint, baseboard, etc., which is when the code requirements for living areas become applicable (outlets to code, natural ventilation/glazing minimums for window openings, etc.) and that room is no longer treated like a basement or storage area. At this point, (generally speaking) only after this point will that portion of the basement be added to the home's living square footage count for permitting/plan review fees and for real estate listings. Of course, this can change depending on the building jurisdiction so verify the locally adopted IRC code version w/ amendments for a "Definitions" section and/or "Measurements" or something similar for how they want this calculated. Also, keep in mind that Zoning and Energy Compliance may want a totally different number for the square footage. If you are still struggling or not sure you've come to the correct answer then post a link to the permitting department website and your plans PDF and I'm sure myself or others will take a look -
Hi there, Just to clarify, do you mean display layers or layer sets? Next, yes - you can delete almost all of these components except for the CAD Blocks because some of the user library fixtures need these symbols and are not able to be deleted. For deleting line styles, make sure that you don't have CAD Blocks that are using that particular line type or that line type assigned to a display layer (ex: base cabinet's dashed line type) as that will prevent deletion. If you mean display layers, if you want to reduce the number of display layers there are a couple ways to do this. 1) Deletion - Make sure that nothing on your plan is assigned to that layer and that no dimensions, wall types, text styles, callouts, etc. are either - then most layers should be able to be deleted outside of a core group required for the program. 2) "Merge" layers that you can combine elements on your plan and do not need separate layers for. If you mean layer sets, in order to get rid of the components above you have to delete these in a certain order for them to not be "greyed" out. Off the top of my head.. (and I may transpose a couple of these, but play with it and you'll get there). Deletion order (ish): Plan Views Default Sets Dimensions Styles, Text Styles, Arrows, Callouts, etc. Layer Sets
-
Ahhh thank you! So... hear me out. What if... 1) I made another copy of the file to isolate the terrain from the building. 2) Shifted the terrain over as needed on the new isolated copy 3) Deleted the existing terrain entirely from the master file 4) Copy/paste the adjusted terrain from the isolated file....Would this work even a little or would it not build correctly at all? If not, maybe I can create the new terrain perimeter after deleting the original and just paste the elevation lines? Anyone know if there would be errors copy and pasting the entire terrain model, where it goes wrong?
-
Hi there! I need to move a house over about 3' to take advantage of an encroachment opportunity. I had already "completed" the 3D model including the lot's sloped terrain, driveway and a "retaining wall" (foundation wall). I modeled the terrain using elevation lines which I cut (and put on another layer... I think) around a flattened building pad which was an elevation area. No spot elevations were used. I separated my floor plan 2D drawing from this file previously, so... The primary question, which should I move - the building (with decks) or the terrain? I'd appreciate it if anyone has any insight on the best strategy to go about doing this effectively. I'm sure I can make a botched attempt and spend awhile cleaning up, however I'd love to hear if anyone has run into this and any tips you can share. (I can post jpegs or the file if that's helpful!) Thanks, Kristina
-
Rescheck for Basement Finish…
tinadelllic replied to tinadelllic's topic in Building Codes and Compliance
UPDATE: Unfortunately this jurisdiction did not allow for any way to exempt you from a Rescheck report, this might be because they recently changed over to 2021 IRC. Apparently this project type is not allowed to use the prescriptive method… I cannot remember if that was in the Rescheck Alteration guide or if that was per this jurisdiction… In this case, exporting data from a Chief architect file would not work for this one without major editing/deletions since everything but a couple windows are staying the same and I really don’t know for sure what the existing building shell assemblies, insulation types or fenestration energy ratings actually are.) **If someone knows a way to creatively configure Chief settings to make this work, please share.* Ultimately, I got a Rescheck report figured out via manual input with a bunch of tweaks in Rescheck’s project and individual element settings. If anyone runs across this post as 2021 codes are adopted and wants the details of how I did this - feel free to reach out -
Electrical load calculations and panel schedules!
tinadelllic replied to tinadelllic's topic in Offering Services
Hi Joe! My apologies, I must have completely missed this with all the fuss studying and taking my CPBD exam over the weekend. I messaged you! -
Need Electrical Load Calcs & Panel Schedule
tinadelllic replied to Joe_Carrick's topic in Seeking Services
Are you still in need of help with this? I’ll PM you a few questions. -
I always save them both in a word document on my desktop that I back up on iCloud as well as on a template .layout file. You can certainly save notes to your user library and export the .calibz library file to a folder on your computer as well as backup the template layout file under “Backup Entire Plan” in your File dropdown menu. Regardless of your choice here I’d recommend having multiple ways you save it since it’s not a little amount of work!
-
Hi there, Here's what I use for my plans as the 2-Way Clean Outs typically need to be 24" apart. I've seen different surveyors and architects use different symbols and labeling for clean outs, the main objective here is to make sure that whatever symbol you use is in a drawing legend and/or clearly labeled directly on the plan. Hope this helps. CAD W LABEL - NEW 2-WAY CLEAN OUTS.calibz PS - I guess I should be clear that this is what I use for exterior clean outs (outside in yard). There are also interior clean outs for which I use an access panel with label, depending on the project scope.
-
Best way to show sewer / water line service on a site plan in Chief?
tinadelllic replied to cbucks's topic in General Q & A
Just to verify, you are talking about the utility line and not the meter location, correct? Yes, line types are definitely the way to go! The critical point here is to make sure you include a line type legend. Here is a PDF of a sample site plan I found a long time ago that has several utility service line types. I’m honestly not 100% sure where but I’m pretty certain it was an example from the building department website from a project I worked on. sample-site-plan.pdf Also, you can create or edit line types in Chief architect. Check out this article:https://www.chiefarchitect.com/support/article/KB-01019/managing-and-creating-line-styles.html -
Figured I would put this out there… I’d love to help you with your project’s electrical plans! I can provide load calculations, panel schedules, and electrical plans for anyone’s project needs! The vast majority of building departments do not require this work to be done by an electrical engineer unless the work is for service upgrades greater than 400 amps. New construction, additions, remodels or just adding a sub panel - these are all scopes of work I can accommodate
-
For future needs, I can provide load calculations, panel schedules, and electrical plans for anyone’s project needs! The vast majority of building departments do not require this work to be done by an electrical engineer unless the work is for service upgrades greater than 400 amps. New construction, additions, remodels or just adding a sub panel - I can help with all!
-
I’m going to preface this by saying this is super silly to require for several reasons… however a building department in Colorado (2021 codes) has requested a Rescheck report for a basement finish project. Does anyone have experience with this type of input for Rescheck? Tips to help me comply or explain how this is not a silly request are welcome and appreciated ❤️ Context on scope of work: No existing conditioned areas will be modified, no new openings for exterior doors or windows, no replacement fenestration, and the concrete foundation walls have an insulation blanket installed by the builder when the house was constructed in 2015.
-
Hi! I've gotten comments in my emails that this was an old post so others weren't sure if I was still offering services but I am
- 5 replies
-
- permit submission
- large luxury house
- (and 6 more)
-
Sounds like you live somewhere reasonable haha. In the jurisdictions I've been working in most recently, panel schedules are required for all new construction, home additions that are more than just one room, if you upgrade the service amperage on an existing home, and sub panels.. ugh. This of course is along with load calcs. One line diagrams are sneaking their way into the norm too.. lol
-
Every building department is definitely different. I added the GFCI/AFCI aspect to my panel schedules at the request of the building department after a plan review on a project from about two years ago. As always, it’s essential to use anything shared on Chief with caution and “localize” to fit your application Do you have a favorite panel schedule template you prefer to use? Would love to see more ideas!
-
I have similar tables I've made to use with load calculations and reference tables for typical appliance watts, formulas, conversions, etc. too
-
Here's a couple examples of how I have organized panel schedules which coordinate to Notes (keynotes) with each breaker number to show which circuit each electrical element on the drawing is on. I've had many building departments approve my drawings using what I've shown below without issues thus far. Hope it helps! These two examples are for the following panel types: 1) Feeder "Sub Panel" where the panel had all 6 breakers in a single row. 2) Table template where the numbering for the breakers alternates between two columns (typical electrical panel) Let me know if you have any questions and I'll help if I can! PANEL SCHEDULE - FEEDER SUBPANEL A.calibz PANEL SCHEDULE TABLE - ADVANCED WITH LINE LOADS.calibz
-
Personally I’ve developed a massive word document that I copy/paste applicable code excerpts onto a layout page I’ve formatted to just be a huge list of codes for the project which sometimes even runs two pages long for bigger scopes of work. All in all sounds like your mind was in the same place!
- 10 replies
-
- building codes
- redline
-
(and 2 more)
Tagged with: