Designer100

Thanks, I will try it. 

finished floor 5'6" above grade, garage is regular slab (with stair going up to laundry room.

any help verifying above and with stair -landing - stair to entry porch.

Also I cannot get kitchen island to close up.I have tried break tool and still cannot get it to work. 

Any help would be appreciated.

Thanks 

McVaugh.Jim_Custom.plan.7z

This is a solid brick fireplace though.

Thanks guys for the help. I resolved it. The chimney cap does not show up on elevations though. It shows up in 3D. Is there some way to line the stud brick wall up with the 

new stud wall! I cannot seem to get it to line up exactly going by fireplace brick etc.

Can anyone assist me in how to adjust the smaller chimeny and close it up on the elevation? the other one is existing, but I could close it up to. Want my elevations to look right 

for my client. 

Tharp.Ben Remodeling.plan.7z

Thank you Jon. That solved the issues. 

I am having fireplace issues. I had regular fireplace drawn previous. Client wanted real  fireplace not prefab. When I drew this one in it filled up Family rm and Bedrrom wall windows with brick. I am meeting with this client at 9:15 am in the morning right after another meeting over at 9:00 am. I will not have anytime in the morning to correct this issue. Any help tonight would be

appreciate the help in getting the exterior walls show right again with siding on new addtion and not covering up windows. file enclosed zipped of project. 

Thanks,

Newell

newell.cheatheam@gmail.com 

713.385.3622
 

Tharp Remodeling.zip

how can I get the catheral wall toward fireplace to show correcting closing up clg. where you do not see under roof. I resent plan unzipped

Thanks. I just copied, pasted in place from 1s floor chimney to attic and solved issue.

here it is unzipped. 

Tharp.Ben_Remodeling.plan

It would be nice to have 3D ADA Drinking  Fountains double bowls - 2 spouts  to insert in commercial projects. it would be nice to have more 3 blocks for commercial.

I have been trying for 3-4 hours . cannot solve the issue of family room and cath ceiling with, beam in middle and furr downs from top of bc to btm of cath. ceiling on each side of fireplace flush with fireplace wall on family room side. You can see roof is showing in picture. Remodeling existing fireplace needs to go thru roof. Issues with roof not looking right. 

I would appreciate any help. 

Tharp.Ben Remodeling.plan.7z

I have tried what you guys suggested and cannot get the furrr down to stay under roof, nor chimney to go above roof. I took elevation and does not let me draw furrdown.  Also it is supposed to be cath. clg all across the family room and roof continues straight across same peak roof all across the house.

Tharp.Ben Remodeling.plan.zip

Thanks for advise

thank you guys for points

On 1/4/2017 at 1:26 PM, RobUSMC said:

I just threw one to you.  I've been there also.  I love the site because as with anything in most cases there are several ways to do anything on CA and everyone has there own way and opinion. The past two years my wife has gone thru breast cancer and I have probably take more from here than given and had rocks thrown at me a time or two.  Again, Ive been there But life does happen at times.

can the soffits match the catheral ceiling and stop at clg.

i would appreciate any advise /help on raising this brinck fireplace 30 in above peak roof (it is existing in this remodeling) and get rid of the walls sticking above the roof w/o affecting family room catheral ceiling.

Thanks,

Newell 

713.395.7622 

Tharp.Ben Remodeling.plan.7z

Thankyou

Is there s way to door or window schudule on a remodeling where the existing house doors and or windows will not show up on the schdules. for the new addional rooms etc?

Would appreciate your input.

Newell Cheatheam 

Chief x8, windows 10 

Thanks

I added 2 ft into a plan at different areas of 2nd floor and first floor. The Building sections did not update and showing additional walls as you can see in the 2 bldg. png sections. Also the one with stair is not closing up after moving stair at top landing.

Any help would be appreciated..

1556.zip

Thanks guys for the point reputation

On 12/28/2016 at 1:16 PM, Alaskan_Son said:

Newell,

 

Since you asked, I posted this quite some time ago...

 

 

I was just trying to be straight with you.  As with many of your other threads it looks like you may have never returned to it, and certainly didn't respond to it. 

 

Anyway, some of those negative points were from me.  Not because I think you are too small.  On the contrary, I think you've got  lot going on and it just seems like you treat this forum like a repository for free help to get that work done and nothing more.  Truth is that I'm not sure I've seen any evidence that you're trying to learn or help others learn, mostly you just want to get work done and have us do it for you (at least that's what it seems like).  In fact,  I stopped responding to your threads a long time ago after I poured in time to help you out...only to have my (correct) answers completely ignored or otherwise unappreciated and like I said in the above post, I don't think I'm the only one who feels that way although I may be the only one who has been willing to say so out loud.  Actually I just went back and read through a handful of your threads and was very quickly reminded exactly why I feel the way I do.

 

So...in short, if you want a better reputation all you really have to do is take the time to participate a little better:

• Take the time to truly comprehend the answers people give you so that we don't feel like we're wasting our time.
• Invest the time to learn so it doesn't feel like we're just doing your work for you.
• Maybe do a little helping out yourself from time to time, but most of all...
• Just participate better.  In my short foray into the past I found thread after thread where people were donating their own valuable time, legitimately trying to help you and you failed to participate even in your own thread.  If you want help and if you want to learn you should be willing to take the time to respond to people trying to help you. 

Admittedly it seems you've gotten a little better.  I don't think your reputation has gone down in some time though either.  And lastly, just as a side note for whatever it's worth,  I've given you positive reputation in the past as well...

 

 

Is it possible to draw site or plot plan and place house this house just reverse on it and write flip at jobsite.