Designer100

Can anyone help to get the circle wall on back side of stair and closed under stair. Need 2 2'8" or 3' doors cleared going to verada.

Might even consider w.i. railings. balcony railing on stair is not matching stair railding.

rear 2nd floor rear balcony need beams below it and maybe w.i. railings.

Walker.Patrick 1.plan

• In Prospective View the 2 story new construction is not showing floor jsts enclosed etc  
• Stair landing about 18" in not showing the wood floor to living area.
• small windows in Bathrooms are showing a horz. divided light and I cannot make it one light or verticle.
• This is a meterrian style home. the 2 story part is the first phase of the construction. and one story later.
• I am still working on the prelim. plans and will dress the front facade up later. Maybe a drive thru porte-co-chere on the front.

Chief Architect x7.

any help would be appreciated. 

Walker.Patrick 1.plan

I am doing a remodel that is 3 hours away. I made one trip there to measure exising house. Is there someway to caculate the correct angle of the front of the house what with a smart phone app., The wallw  is giong in 2 diections. It is on an island. They have no survey, but want to reuse the foundatoin. 

Windows 7

CA x7

Newell Cheatheam

www.newellsdesigns.com 

newell.cheatheam@gmail.com 

I figured it out thanks,

I need the 2 lines out of my layout. I know how to print and send plan to layout. 

How  do I get the 2 lines showing in the middel out of this layout sheet I created?

Newell Cheatheam

Chief Architect x7

windows 7

42 x 30 layout.layout

MY SECOND FLOOR ON THIS REMODELING IS NOT LETTING ME LABEL IT AND PLACE OUTLETS, LTS.  ETC IN THE ROOM. ALSO NOT LABELING 2ND FLOOR.

CAN ANYONE HELP? opening on second level above stair.

CHIEF X7

newell.cheatheam@gmail.com 

Caplan.Larry Remodeling.plan

i am doing a small remodeling and having issues getting the 2nd floor to show up.When I try to build second floor roof it deletes one wall by stair. garage will be gable on each end 25

1" walls. need to open up stair to 2nd level. can anyone help. I am just adding open second floor room for stg. it keeps doubl labling rooms also like stair area.

Thanks for any help assp. need finished early morning. first floor exist. of garage and adding stair.

Chief X7, windows

newell.cheatheam@gmail.com 

713.385.3622 

Caplan.Larry Remodeling.plan

Caplan.Larry Remodeling.layout

Can anyone help me with this roof? You cannot use automatic roof etc. I have been messing with this for 4 hours trying to fix this roof. front to back is 8:12 and sides 10:12 and some sides 8:12.

It says to large to upload? what can I do?

Thanks

for any help.

chief architect x7

713.385.3622

newell.cheatheam@gmail.com 

Luedeker 3.zip

Can anyone help me with this roof? You cannot use automatic roof etc. I have been messing with this for 4 hours trying to fix this roof. front to back is 8:12 and sides 10:12 and some sides 8:12.

It says to large to upload? what can I do?

Thanks

for any help.

Newell

chief architect x7

this is an existing roof with 6 ft overhang across front of porch. Existing shows okay. But when I copied it and revised the plan it is showing the front siding issue going thru windows. roof fascia lines up with concrete below.

Does anyhone know why on Remodeling Floor plan Elevation that siding is covering up doors and windows? I copied existing plan over and made revisions.

Also some walls on the interior is not connecting. Any help here also.

Chief Architect x7

Poninciana Dr.plan

How do I move edge of roof out to edge of front porch for this existing covered porch remodeling w/o posts on it. 

Chief Architect x7

Poninciana Dr.plan

Andy,

that was not correct. I need the remodel elevations symbols to be on existing floor plan. and go to the layout that way to.

One file: kcm Remodeling 2015 - Elevations (Interior floor plan and layout notes different than 2nd one) to go to the layout and file of
Existing Building Floor plan and layout sheet.
is this possilble w/o messing the project up. 

I am leaving out of town and needed to submit to the permit dept tomorrow.

Thanks,
assp

Newell

KCM Remodeling 2015.plan

44x34 layout KCM REMODELING.layout

KCM Existing 11.27.2015.plan

44x34 EXISTING.layout

Thanks for the help Alskan_Son. Yes I know about the stairs. Said existing and only 9'6" long. Something wrong with that. I went on and made it longer like it is surpose to be and sent to client in Tenn. Hall I was doing was floor plan design, power, electrical, and interior elevations. stair and hull of bldg existing. 

Can anyone help with my stair not showing up on ground level from basement . I made foundation as basement (existing). Stair existing only 9'6" ;long. Basement  level stair is not showing up thru floor  top level . 

This is small apartment. Bldg is exist basement and top level all open inside and I designed small apt.  8' clg in basement. This is going out of state and someone sent me measurements. for top floor and basement. 

Thanks for any help.

Newell Cheatheam 

www.newellsdesigns.com 

newell.cheatheam@gmail.com 

281.392.3034

ca x7

Apartment.plan

what you suggested does not fix the problem. It makes it worst and walls still does not show up and creates other issues. Does not give you options to change ceiling also in some rooms. .

Man the Bedrm 2 and 3 side of this house is really messed up and bedrm 4/loft 2nd left. would appreciate any heip. Cannot seem to get the ceilings to work right.

1. Bedroom 2 and Bedrm 3 side of the house has all 8ft flat clgs. (Master bedroom side of the house are 9 ft clgs. main living area, kitchen and breakfast it has a cath clg across the area).

2. Bedroom 4/Loft has 8 ft clg. Bathroom (8' clg. ) walls are not showing up when I  do perpective floor view.(lavatory side of wall is around 7'6" ht.)  4010 window would not even install. 

Thanks for any help.

Newell 

Marburger2.plan

I just drew a exterior wall. Then a polyline converted to moulding to see how it would work simply. I did to top and it went to bottom. 

Anyone know how to correct this? I was practicing so I could use on retail centers. 

Ginkgohouse,

   I still cannot figure out how you did this. Wanted to do the same on the 2 side elevations and 45 degree the right side of the facade also. 

Thanks for your help.

thanks

i NEED THE EXTERIOR MOULDING TO WRAP AND CLOSE END FROM FRONT FACADE TO THE SIDE PARPET WALLS. ALSO i WAS TRYING TO GET THE 

OTHER CROWN MOLD TO LOOK LIKE THE AUTOCAD ELEVATION ENDS OF MOULDING. 

SIDE PARPET OR FACADE, I CANNOT GET IT TO LOOK LIKE STUCCO OF THE FRONT FACADE.

CAN ANYONE HELP. 

NEWELL CHEATHEAM 

CHIEF ARCHITECT X7

KCM Remodeling 2015.plan

I created a profile modling on elevation 5 view away from wall section and saved it to libary. could not shoot a elevation of it to create a detail from view to copy on to elevation.

Any suggestions or help. 

KCM Remodeling 2015.plan

Hi,

This is the first Exterior commercial elevations I have done since gettting Chief Architect x7  7 months ago. This is a retail facade remodeling and  I raised at different areas and installing stucco with 18 in Crown Mold at top of front facade wall, and then both ends of building and  added to top of the brick side walls. Proably Chief Architect x7 moulding 8590 except made 18 in height and wrap each end of the front facade and side walls. 

Can anyone help me?

Thanks,

Newell Cheatheam 

www.newellsdesigns.com 

281.392.3034

newell.cheatheam@gmail.com

Chief Architect X7, Windows 7  

KCM Remodeling 2015.plan