Designer100

 Walker.Patrick One Story 2 07.2016 .zip

Can anyone help with (catheral ceiling interior at Great room, dining, breakfast)-big gable across Great room and Dining at front of house at angles.  Windows following gable will be above each set of 2/80 70 windows.

 Simlar to attached elevation sketch and floor plan. 

I cannot get it to work 
 

Any help would be appreciated.

Sorry. thought I had attached it earlier.

Walker 1 08.02.2016.zip

it has been solved. 

thanks,

1. Can anyone help with slope ceiling or gable front at front of house. Dining and Great room need to be sloped ceiling from each outside corners to middle corner. creating a catheral ceiling inside. Windows will be above each set of 2/80 70 windows.

2. I also need a 3/4"x7.5" 3d Stucco Moulding across the front and down bar side on left. I have gotten some of it done, but cannot get it to work for the rest. 

thanks,.

Where can I get a Microwave Hood vent for 36in electrical range?

Can anyone assist. Kitchen bar is not showing 42" bar ht right?

Thanks,

Newell

newell.cheatheam@gmail.com

1084 One Story.plan

Shane,

Thanks for the help.

Shane,

That looks good but, from the patio eave edge soffit, it is supose to be flat ceiling for maybe 5' then slope up to the family room wall and be high to put tv.

How can I remove the roof on inside by master bedroom flush with wall?

Thanks for the help.

only the roof above the patio is new. needs to be 3:12 pitch and catch same eave ht where I have beam. I could not get the roof of existing to match existing. that is why I sent pictures.

Existing the rear roof above 2nd floor existing goes down and has 11' eave ht existing at rear of Family room. I could not get it to look right. then a 3:12 roof will come down to cover the

new patio and catch the eave ht same as master bedroom. porch ceilng will be flat coming from the fascia for about 4 ft then slope up following the bottom of rafters.

thanks

Rackore,

Thanks

I would appreciate any help with this roof on adding covered porch, that will be flat for about 5 ft then slope up (slope to exist rear wall of family room being about 12' ht when it hits the exterior wall) 3:12 pitch catching the existing roof at

2nd floor about 14 ft up close to exist. chimmney. the eave toward pool where new 22 ft bm +- fasica will match Master Bedrm fascia.

I cannot get the 2nd floor roof to slope down and catch first floor like pictures and then new roof slopes down at 3:12 pitch and has same fascia as exist. Master Bedrm.

Attached is a rough section sketch of how it will approx. look. Attached are pictures of Exist. house. I am adding a covered porch roof cathching the 2nd level roof and

gable on each side.

Thanks,

MaCay Patio.plan

SKETCH SECTION07202016.pdf

I know this is a real simple home than what I normal do. Hod do I just have one 8x8 column on corner of front porch?

I appreciate any help.

1084 One Story.plan

I know this is a real simple home than what I normal do. Hod do I just have one 8x8 column on corner of front porch?

I appreciate any help.

How do I make a prarie window design.

Say using chief 4060 broken arch (12") f.g. , then I need a 6 in in mullen or alum all around with lines coming from corners and top of the arch.

Thankyou david

Try this upload.

Thanks

walker plan.zip

1.  main issue is I cannot get a gable at front porch entry and go thru porch, grand hallway, and rear veranda. When I break front porch wall and rebuild roof manuelly right side is okay, but roof goes crazy on the left side of the gable. Any help would be appreciated.

Thanks,

Newell

newell.cheatheam@gmail.com 

walker plan.zip

1.  main issue is I cannot get a gable at front porch entry and go thru porch, grand hallway, and rear veranda. When I break front porch wall and rebuild roof manuelly right side is okay, but roof goes crazy on the left side of the gable. Any help would be appreciated.

Thanks,

Newell

newell.cheatheam@gmail.com 

All I like in finishing revising this prelim. is 2 issues. I would appreciate any help.

1,  I need a catheral ceilng and gable all the way thru Front porch Entry, grand hall, and rear verand. When I break wall at front of porch. hit on it to make gable. I get wierd effect on left and cannot solve the issues.

2. I also need a coffered ceilng and different angels whole open room of great room, diing, breakfast and kitchen to 14 ft ht with 10 ft plat. I cannot figure it out.

Any help would be appreciated. I have been trying to solve these 2 issues for 1 1/2 days.

Thanks,

newell.cheatheam@gmail.com 

walker plan.zip

I cannot get a prelim plan to zip to upload for this site for help. says to large and only prelim. 

David thank you for your help.

I cannot solve Section Elevation 7 issue. Sloped clg is does not look correctly. There will be beams follow roof rafters also.

It is showing something wrong on wall also.

Thanks for any help

Cheif x8 

Newell  newell.cheatheam@gmail.com 

281.392.3034

Rod Home 07.08.2016.zip

Front Elevation  or Camera 44. 2nd Level above first lever roof wall facing front of house on 2nd Level on right siden (front) and partial left side 2nd leverl wall  is not showing the hardiplank.

Kitchen has stone around range.maybe this is messing things up. Also front elevation is not showing right. It has a 11 ft clg same as interior. (not showing that) Don't know. 

I would appreciate any help correcting this issue.

Chief architect x8

Rod Home.zip

Thank you for help. 

1. Exterior Rear Elevation (left) is showing stone columns stopping at 2nd level btm of deck then from deck to top of eave. I need it continuous. 
2. need sloped clg at 2nd floor veranda. 

Chief x8

any help would be appreciated. 

Rod Home 5-13-16.zip