-
Posts
381 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Designer100
-
-
1. I would appreciate any assistance help on the angled upper and lower kitchen cabinets. I cannot seem to get them to work out. typical nearly on each side of the kitchen porjection.
see attached jpegs.
2. I cannot get the from porch flat roof and railing to look like picture.all of a sudden it put space between the 2 foot wall dropped I and put iin. Help appreciate.
Thank you.
Newell
newell.cheatheam@gmail.com
-
I cannot seem to work out roof above garage on right w.o messing up window, nest to front entry to the house. I would appreciate any suggestions someone can give me.
Trying to get finished before going out of town tomorrow. Trying to keep the 4:12 pitch. I tried coming off just under windows with maybe a 2:12 roof to the 4:12 roof but could not get it to work. I have not had so many issues with a house plan.
Thanks for any help.,
- 1
-
How do I place a flood light on a exterior column or exterior soffit? Aalso placing a electrical outlet on a column. I have made a small retangle wall in past to do it.
Any suggestion? this is something cheiv developers need to work on.
It says walls or cabinets! Ther should be a simple solution.
-
thanks
-
I worked it out okay. See attached.
-
Thanks for help. This is exist. house and just extending out porch. All windows are existing.
-
Thanks fo rthe help solver. the wall is marekd no room def. and attic. I could not find where to uncheck them?
I just went on and drawn the 2nd story roof manully.
1. I still need ceiling issues resolved as you can see in the attached pictures.
2. I still need to have open area of Great room to say open below. It will not open 2nd story area to say open below!
-
Roof will not complet over 2 story great room, part of kitchen and part of entry roof.
above dining room there is a drop down ceilng part of clg. cannot get it removed.
Also above entry there is a drop down that will not remove. dining will not let me show 10' clg?
All first floor 10' celings and open 2 story at great room. 9'; ceilings 2nd floor.
Would appreciat any help. Need to get to client tomorrow before they go out of town home 3 hours away.
-
This is exising home Veranda. Just adding a new roof. and new slab , contractor has already given price. I design up addition on a 11x17 sheet.
-
I would appreciate any help on this small remodleing of veranda addition. Attached is picture of existing. I am trying to added roof in midde. most of house is 7,3:12 pitch. But they have a min. of 4:12 pitch. (but the roof they have in there now on paito as you see in pics is less than that!) tying to keep windows.
I cannot get it to work out.
Newell
- 1
-
When I am CA x10 to download libary items it goes to x9. Can someone help me with this issues?
-
you just hit 3D and roof aand can see roof. This is just a remodeling on inside. roof is not affected.
-
can anyone assist me? I am trying to have a faulse ceiling at at 9'9" P.L. showing as the bldg. section shows that I have drawn across in 2D.
I do not know how to do it to the family room with at coffered clg to 12' for this remodeling project. Also I have beams serveral places that are flush with 8' clg.
Any help will be appreciated.
Newell
newell@newellcheatheam.com
713.385.3622
- 1
-
boundry box arond the library post would not go smaller.
-
Heres the zip file.
-
Connot get porch railing to go all the way to the round column. Any suggestions. 3 ft of porch is uncovered.
Thanks for any help someone can give.
Newell
Chief x10
newell@newellcheatheam.com
-
is there a way to flip a pdf floor plan in chief Architect x10. I am doing a remodling plan and I have old set of plans, but it is a reverse of what was built. I was going to scan it to pdf or jpeg and use to trace over for remodeling. Is there a way to flip a pdf or reverse it in chief or do I need to draw over existing then flip in chief?
Newell Cheatheam
Chief x10
windows 10
-
I coudl not figure out how to make a 30" gate on left side of the uncovered 48" area.
-
I been trying to figure way I cannot get wall to furr down from roof on left side of Kennel like right side. I would appreciate any help.
Opt. future , I also wanted to continune the roof above pool eqipt. except cut roof pack to maybe 6 ft. roof projected out with 2 posts supporting it .
Thanks for any input.
Newell Cheatheam
newell.cheatheam@gmail.com
Chief x10
-
Thankyou for the help.
-
Pool posts are hanging in space from ceiling and slab. Also fascia is showing opening thru it. I would appreciate any help
solving this issues.
Thanks,
Newell Cheatheam
X10
-
Thankyou Eric. You are awsome.
-
I would appreciate any help in correcting the 12 ft hip roof tieing into a 10 ft ceiling roof. 5:12 pitch. I have been trying to correct it for hours.
If anyone can Help I would appreciate it. Trying to get const. drawings finished. Need to get back on it in the morning.
Newell Cheatheam
X10, Windows 10.
-
I used automatic roofs.
kitchen cabinet angle issues
in General Q & A
Posted
I solved the kitchen issues. Need the balcony issue solved.