-
Posts
381 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Designer100
-
-
How do I upload a picture. not letting me. Also says file to big to upload in chief.
-
Chief says to large and it will not let me upload a zip file
-
2nd level balcony floor decking is not showing up and It will have a roof over the rear of the balcony but not the side.
Can anyone help.
Chief x8
windows 10 .
-
Thanks for all the help. I solved the issue
- 1
-
1) I NEED 2ND FLOOR BALCONY WITH ROOF OVER REAR VERANDA WITH EXTERIOR STAIR ON THE EXTERIOR OF WALL ON KITCHEN SIDE OF TROPHY ROOM, CANNOT FIGURE IT OUT FOR JUST THAT AREA (HOUSE, it IS NOT 2 STORY. 8 FT. CLG.
All I like in finishing up prelim. plan.
Windows 10
chief x8
-
The rear plate line of this bldg is not all the same slope. All roof is not sitting on plate line. has 9 ft dropped ceiling on interior with 12 ft eave ht for metal bldg.
Roof is surpose to be metai. I have changed in material and it still does not show.
Any help would be appreciated.
Thanks
- 1
- 1
-
Can someone assist in telling me how to remove walls that project into the room with domer that are slope up to room ht. I used automatic dormer to create.. I need to hid the part that does that. Make invisible or something. any help appreciated.
Thanks
-
I cannot find the ignore tope (2nd) floor in the build roof dialog box?
-
Roof Issue - just domers need to show on new second floor plan. It is Showing new roof over part of new second floor. Need the walls to just go to bottom of Plate line of existing roof joists.. Can any one help?
Would be appreciated.
Newell
newell.cheatheam@gmail.com
-
I was allowing floor for existing ac in attic now. you just need 6'8" clearance per code for step to clg.
-
Hey guys,
I would appreciate any help on this prelim. plan remodel on why my stair is not finding the 2nd floor
I adding 2nd floor under existing roof with dormers for egress and chief with automatice roof is putting a roof on part of the second floor and not showing one of the dormers.
I need the second floor not to show thru and the roof to slope thru and be lower plate where it is lower than 8' plate. with only the domers showing on 2nd floor.
Any help would be appreciated and advise if that is okay.
Thanks.
-
I do not want to delete all layers to have building set on existing sidewalk paving at 0 level. not floor below does not solve the issue. Can anyone help.! I want floor on sidewalk.
-
Does anyone have a commercial drink dispenser 3D cad dwg that they can share with me? I need for a hotdog stand.
Thanks,
Chief x8 Windows 10
newell.cheatheam@gmail.com
-
I need floor of this project to be direct on sidewalk of Mall (w no floor) with 6"x6"x1.5" (I think) thick rubber mat. Can somone assist me. Trying to have this ready tomorrow for client. Anyone have a stainless steel 3D commercial Lavatory hand sink 17"x 15.5"x8". i Need floor to be at zero. I unchedked floor in room def. but it is still 12" above grade. I need the floor at zero.
Chief x8 Windows 10
Thanks,
newell.cheatheam@gmail.com
- 1
-
solved just go to work on semiarch roof and glass and metal front.
-
can anyone assist. across the front of this kiosk. I need 2' - 15' - 2' . all the sides and back need to stay as they are. I have locked sides and rear. but cannot seem to get it to change the 2 angles to 2' w/o changes other walls?
Also this si to have a 12' maximum ht semi- arch roof across the front. ceiling inside is to be 8'. I made defaught 8' ceiing inside. do I make the rest of ht wall 4' to fit under arched roof to be attic.
Also going to be metail roll up door openings at 15 ft and the corners client wanted to roll up, but then I do not think that would work. Do anyone have a roll up 3d door I can use. it would be above the 34" counter that will overhang 14" out from the wall under rollup doors (windows).
Help would be appreciated.
Chief Architect x8
newell.cheatheam@gmail.com
-
i am trying to design a pole shed roof.
- 6 - 4"x4" treated posts w/ treated 2x4 on 3 sides
- treated open 2x6 roof joists with metal roof (open on front and back)
- Just a cheap horse shed for a friend.
- going to be open dirt for floor
can anyone help? see attachment
Newell
chief x8
windows 10
newell.cheatheam@gmail.com
-
So can anyone help with these issues.
-
I think Chief ought to have more commercial friendly also. I design Light commercial - up to 115,000 retail centers, warehouses, resturants, clubs, auto shops, beauty salons, 2 story office buildings, climate control facilities, medical facilities, wedding halls, gas stations, private schools, space planning, lease spaces, churches and other commercial projects.
Newell Cheatheam, CPBD, FAIBD, TIBD
www.newellsdesigns.com
Katy, Tx.
-
- Bath house with metal building structure of metal studs
- need exterior gable walls to go to bottom of roof
- need dropped 2'x2' layin 8 ft ht ceiling (mechanical needs to fit in attic)
- Need metal joists in Laundry room to span other direction toward restrooms.
- Wall where toilets are will not change to have tile on the inside ?
- Needs to be metal standing seam roof.
Any help would be appreciated.
Chief Architect x8
windows 8
Thanks,
Newell
newell.cheatheam@gmail.com
- 1
-
Thank you
-
What do I need to do to have interior elevations to be more clearer
When plotted to pdf the cabinets to not show up clear
Chief x8 windows 10
-
Can anyone help on the rear dommers and front domer of this remodeling prelim remodeling plan I am working on. the walls are not showing up on the exiterior of the roof.
Chief A x8
Thanks,
newell.cheatheam@gmail.com
281.392.3034
-
detail not showing up when I print layout? it shows up on layout.
chief x 8
newell.cheatheam@gmail.com
Porch roof issue
in General Q & A
Posted
1. all I like in finishing up this project const. drawings is a roof over porch/entry. It needs to be 6' wth x 3' dpth. 9' or 8' clg with gable roof.
Any help would be appreciate.
2. cannot get cross section to show roof at 12 ft plate (it is higher) and joists at the 12 ft plate.
Thanks if someone can assist.
Cheif x8
windows 10
BATH HOUSE 1 .zip