-
Posts
381 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Designer100
-
-
I have issues at the rear of the building with slope up to rear carport. Can anyone assist in having a slow slope up to carport on each end? the exist. carport concrete is around 42" above grade. same as existing bldg
I would appreciate help.
Newell Cheatheam
newell@newellcheatheam.com
CA x12
-
-
can anyone explain how and help me enclose between this new gable roof and ceiling. Also looking toward house thru gable closing in with Hardi-siding. The old roof is showing thru and something else when I do a rendering (see attached). Need to look good for a client in 3 D. They are adding a roof over existing 10' x 20' patio.
thank you if you can help.
Newell Cheatheam
CA 12
newell@newellcheatheam.com
-
Thank you for help. I just thicken the foundation.
-
I have been trying a few days to close up underneath the existing as-built building to proceed forward with designing a new space on the 1st floor.
just show concrete is fine. I would appreciate any help.
Newell Cheatheam
Chief 12
newell@newellcheatheam.com
-
Glenn ,
I tried what you did, but still cannot get it to close in around bldg. What did you do?
-
-
The existing building is the same floor level all over 36" ht form typical grade or parking lot. . Yes it looks good. How do I get it to work for the terrian? The drive is coming up from the rear street to drive thru , then go out the drive on the steet.
-
1) Finished floor for this existing building is 36". The driveway in back is level with finish floor also. I cannot get the landscape all around to fill in under building and driveway. The drive slopes up to flat across as much as I have flat. The exist. H.C. ramp goes into a concrete porch. This is as-built plan and then I will design a restaurant on the first floor.
2) I cannot get u shaped stairs to work and land on the 2nd floor by the entry door.
I would appreciate any help in accomplishing what i need to do.
Thanks,
Newell
-
solver,
1) All the walls that are dark black on floor plan are new walls in the remodeling.
2) the right side 3'4: added on side is new addition and new roof at 3:12 sloping into existing 7:12 roof.
3) rear Master Bedroom new walls extends out and is new shed roof at 2:12 slope and slopes up into 7:12 roof.that was to f.p. wall.
4) front porch is 2'10" bigger in front of existing dining
5) attached are a few pics of existing. I could not get living to coffer to 10' height.
Hope all is well and healthy with you Solver.
Thanks,
Newell
-
I would appreciate any help in getting this roof worked out. I have been trying to get it to work for hours.
Thanks,
Newell Cheatheam
chief Architect preimer 12
newell@newellcheatheam.com
713.385.3622
-
I fixed it. aligned foundation with 1st floor.
-
there is 120" to ceiling joists and the ceiling drops 12" (to 9' ) for suspended ceiling. I have tried all I can to get the windows and doors to lay against the wall and to get the existing wall between existing and new addition to show up.
-
-
Does anyone know ho fix issues I have on this commercial remodeling addition?
1) Windows and bar cabinets are not against the wall!
2) wall is not showing on full camera looking back toward where it attaches to the existing building. Wall existing is brick on inside, unless I decide to cover it with gypsum bd!
3) I have a 10 ft. plate with 9 ft dropped ceiling 2 ft x 4 ft acoustic tile in new addition.
x12
Newell Cheatham
-
Chopsaw thank you. New learning today.
- 1
-
Chief x11.
1) Does anyone know how to do a ADA partition with opposite swing in womens restroom to swing in. Cheif only has it like mens rrs I have shown? the one in library only swings like mens rr and does not have one that swings opposite direction, to go in womens restroom!!
2) I have 10' ceiling and would like to have 9 ft suspended drop in 24"x48" acoustic celing ht this new addition. Can anyone help?
Thank you if you can help.
Newell Cheatheam
newell@newellcheatheam.com
713.385.3622
- 1
-
I cannot get this front porch deck to build and have 4 steps. Can anyone help? It cust out beams when I try to do porch.
Thanks if someone can assist.
Newell Cheatheam
x11
newell@newellcheatheam.com
Katy,Tx.
-
Thank you Mark#D,
Do you or someone else know how to bring the front porch deck up by Entry door with 4 steps to ground? Also put grass under apartment.
Newell Cheatheam
www.newellsdesigns.com
This is in X11. I have x12 but this small apt and main house in x11
newell@newellcheatheam.com
281.392.3034
-
Does anyone know why my pier and beam foundation floor joists and beams disappear when I try to do perpective and I have to back out of it? Open old one! I custom drawn floor joist and pads and 1 concrete block on each pad then drew beams and floor joists. I keep trying to pull siding down over to cover the beams and floor joists and then they all disappear. I need the floor decking to appear on a section over floor joist to with deck up level with entry and grass under home.
I did this project in Chief x11. I would appreciate any help in this apartment.
Thanks
Newell Cheatheam
Katy,Tx. 77450
newell.cheatheam@gmail.com
713.385.3622.
-
Is there a way to add pre Mfg. brick to outside of the foundation above grade that does not affect the porches etc or parts you do not want it?
Newell Cheatheam
www.newellsdesigns.com
newell.cheatheam@gmail.com
x11
-
THANKS kWHITT
-
Hey guys,
I ariginally had cable rails and now I cannot get stairs to go back to noarmal stairs. Ballusters are not showing and I need to deleter the cable rails that are showing up in specs. Stairs has been move from another part of floor plans. Proably something simple.
Can someone help?
Thanks for any help.
-
Does anyone know how to get a 24" ht house floor off grade to sit on the Terran? they are going to build the dirt up to raise the slab I have never done this.
I would appreciate any help
I would apprecaite you help.
Newell Cheatheam
CA 11
Drive way carport and drive issues
in General Q & A
Posted
so any suggestions. You mean use ramp tool
How do I get the mess under each end of the carport?