Mark3D
-
Posts
485 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Mark3D
-
-
Cross section camera I drew a cad triangle the shape of the roof got the length of the short side and subtracted it from the default ceiling height
- 1
-
Change your verandah rough Ceiling height to 87 15/16"
- 1
-
-
See if that give you some clues to get you moving in the right direction.
I edited this post and added a file with drain
-
Check out the edit area tools in the edit menu
-
-
-
Watch a training video on manual roofs then you will not be at the mercy of missing information
-
On the small gable roof plains you have the base lines on the inside edge of the main layer to me they should be on the outside edge of the walls main layer i the reconnected the roof edges and the stray siding went away
See if that is any good
- 1
-
I have it working but file is to big so I put it on google drive
https://drive.google.com/file/d/1CoYTpBBTNXRXu6XqFcW3jNzTxGWrYBZN/view?usp=drivesdk
It was building walls set to retaining walls elevation data crossing retaining wall
- 1
-
You have uploaded a file that is open so it has no data , save the file close chief and upload again.
-
See if that is any better i got rid of gable line as it was stopping roof on soak tub room and used Make roof base polyline and tweek it at the problem wall intersection, so now auto roofs will only build to roof base polylines so if you change your model you will need to change roof base polylines
-
See if that is correct i just added a gable line so auto roof are good others may have a better way
-
-
28 minutes ago, NeilofOZ said:
Mark, a beautiful sight to my eyes, was this done via Substance Player, worked like a treat, if only I could do likewise with the Face Bricks, but it appears the original image wasn't suitable.
Not substance i did it with a program called genetica as substance could not fix the bad lighting, Genetica has slider to try and equalize the lighting
- 1
-
-
The image you have found is not any good bad lighting and has no grout it will not work
you need a image with even lighting and has half grout joint around it edges.
-
Try and zip or compress the plan or put it on dropbox, google drive or one drive and send them a link, another option is add the material to library from plan materials then export it to your desktop upload it to the forum or send to chief support
-
- 1
-
Have a look at that file if it is any good i try and do a video explaining what i did
-
there is only one its shown in my screen shot one elevation region go to the wrong side of the retaining wall
-
25 minutes ago, robdyck said:
small jump to 12 MB. Takes less than 2 seconds to generate model.
Thanks for the info not sure what is going on on my end with file size jump
-
5 hours ago, robdyck said:
Here's what I did: Resize the terrain so all items are within or meeting the terrain perimeter. Nothing extending beyond. Check for elevation region overlaps. That took the build time down to 2 seconds.
Another good tip for you: adjust your fill patterns used in plan view to solid fill wherever possible. If you need to see through them, adjust the transparency. Busy fill patterns in plan view slow Chief down as well.
I tried your suggestion increasing terrain size that made 7 seconds quicker, did you get a massive file size increase ?
-
Screen showing other problems
35 minutes ago, Mark3D said:I got your terrain build down to 30 sec buy setting terrain smoothing to Low and triangle count to low, elevation regions turn of interpolate tangent to edge.
There something funky about this file as after I got it going faster the file size jumped from 5meg to 120 meg
Other problems not related to build time, the biggest elevation region is overlapping retaining wall and another retaining wall bottom height has been manually dragged open structure tab and reset default bottom height
Lean to Roof with Auto Build Roof
in General Q & A
Posted
A screen shot to help