katnip4kat

Help! Can't Fix Missing Roof!

Recommended Posts

Hello,

 

I'm new to Home Designer and for the life of me I cannot seem to fix this problem with my roof. And for some reason my HDA won't let me custom build the roof either. So not only is my roof going in odd angles whatever is going on with the roof is also causing some of my walls to disappear (Mostly on the second story). Any advice would be very helpful.

post-10115-0-00747400-1455344787_thumb.jpg

Share this post


Link to post
Share on other sites

No one here uses Home Designer software (we use Chief Premier, similar but more sophisticated). There is a software forum just for Home Designer Users called Home Talk so it is there you should post your questions for answers.

 

DJP

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

  • Member Statistics

    27825
    Total Members
    6254
    Most Online
    ChiefDallas
    Newest Member
    ChiefDallas
    Joined
  • Similar Content

    • By ilastu
      I successfully imported the floor plan for a house from a dwg file, however I have not found a way to convert the roof drawing into 3D. Is there a way to do that? I am using the X11 version.
    • By hamedDesighn
      How to fix wall length Or lock the wall dimention so they don't change .
      i would be thankful if somebody help .
       
       

    • By SpeleoWorm
      I have created a number of different wall types to show proper dimensions (i.e. when one side of the wall is 5/8" Type X and the other side is 1/2" drywall) as well as to calculate the correct material counts and to show the proper information in the schedules.  Unfortunately doing that seems to have a down side...it changes the framing as if they were separate walls instead of the same wall with different materials on them.  I have seen the following side effects (colors refer to screenshots below):
       
      (Green Arrow) In unfinished rooms such as an attic storage space which only has a subfloor but no drywall, the walls get pushed up into the rafters by what appears to be 3". (Red Arrows) The floor joists and top/bottom plates are cut in the middle when they should be continuous pieces of wood.  In addition, you can see that the walls which are produced are not boxed at the end...the top & bottom plates stick out at the end. (Purple Arrow) Parts of the gable wall are not created.  In this case you could argue that it is not needed, but if a builder makes a wall he is not going to leave a hole in it. (Blue Arrows) An extra stud is added to a room that has no drywall, and therefore doesn't need nailer studs.  In addition, it looks like the other stud needed as a nailer for the finished room in the middle is missing from the plan view of the framing (see 2nd screenshot).  
      Am I doing this all wrong (creating separate wall types), or is there a way to use them and fix (any of) the issues I mentioned?
       
      Thanks in advance for any help!
       
      PS - I am a little surprised that the wall finish is not part of the room settings (like the floor & ceiling already are)...that would allow you to have continuous walls and still have different materials in each room (i.e. greenboard in the bath, 5/8" type X in a garage, unfinished in an attic, etc.
       
        
      Example of Wall Issue.plan
    • By TCDLLC
      Hi, I am a Revit user converting to Chief. 
      When working with angled walls in Chief, I have not been able to lock a wall from moving when changing dimensions on connecting walls. 
      I am familiar with how to use the directional tools to move an end of an object to adjust its dimensions.
      When angled walls are off-angle, I can waste significant time adjusting the lengths of the angled walls and still not achieve the dimensions I need for all connecting walls.
       
      The use case scenario is when I am drafting a plan using dimensions provided to me to create the build.  
      Of course, if I was creating a plan from scratch, I could probably avoid this situation.  
       
      Any suggestions?
    • By No1ZZTopfan
      Instead of spending hours searching, I prefer to do this. My apologizes.

      I've designed homes in previous versions of CA. All the way back to 4. Well, computer HD crashed a while back and nearly lost everything. After new HD, installation of CA 12 w/bonus materials, its back to normal. However...
       
      When I render anything in any of the 6 houses in version 12 I get this alert window (see pic) telling me it can't find the files on the list. Instead of spending hours replacing each one, I would like to know if there is way to simple delete or restore them back to their default material setting, delete them altogether, anything! I can't seem to do them (delete is dimmed) either for some reason. Thanks in advance.
       
      Using CA 12 with all bonus materials.