struggling with elevations.

[MulePacker]

 

Stem wall needs to be 96 from footing to top on left side.
Ledger on the right.  11 1/8" TGI

FF In basement needs to be 84 from ceiling.

Every time I input the numbers it auto changes something else...?  
Suggestions please.
Thank you, Jake

[SHCanada2]

the chase around the elevations problem. I've had it many times

 

...from what I remember

Possible Issue 1:

I find that if your entire basement is not at the same elevation and ceiling heights, then any rooms that you try and make different, must have a corresponding room on the main floor with the main floor walls over top of the basement walls

 

Issue 2: Set the absolute elevations, then set the stem wall.

 

or post a video of the issue, and/or the plan

Edited 3 hours ago by SHCanada2

[javatom]

It is generally called a TJI not a TGI.  They are usually 11 7/8 not 11 1/8.  It is possible that you are using an unusual product but you should confirm it.