GrizzlyBear Posted April 17 Share Posted April 17 I think that I have tried everything other than the correct way to get this ridge line to match up to create 2 roof planes instead of 4. The lower roof is 2:12 while the upper is 4:12. The wall with the lean to roof off of it (top of plan) is taller than the opposing wall. I tried lowering the ceiling to try to match the opposing eve with no luck. I have achieved this before but can't for the life of me remember how. Thanks for any help. Waters.plan.zip Link to comment Share on other sites More sharing options...
Mark3D Posted April 18 Share Posted April 18 Change your verandah rough Ceiling height to 87 15/16" WatersMark edit.plan 1 Link to comment Share on other sites More sharing options...
GrizzlyBear Posted April 18 Author Share Posted April 18 Thanks Mark that definitely worked. But how did you find that measurement if I may ask? Link to comment Share on other sites More sharing options...
Solution Mark3D Posted April 18 Solution Share Posted April 18 Cross section camera I drew a cad triangle the shape of the roof got the length of the short side and subtracted it from the default ceiling height 1 Link to comment Share on other sites More sharing options...
Mark3D Posted April 18 Share Posted April 18 A screen shot to help Link to comment Share on other sites More sharing options...
GrizzlyBear Posted April 18 Author Share Posted April 18 Nice thx a lot. Link to comment Share on other sites More sharing options...
SNestor Posted April 18 Share Posted April 18 Or…open the shed roof, lock the pitch, lower the ridge to the specific elevation…which you’d find by doing a cross section through the room. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now