JasonParsons Posted February 21, 2014 Share Posted February 21, 2014 I have tried several Coronado and Cultured Stone options, but when I raytrace with them, photon shooting freezes at 91%. If I switch to a "quick" set up, It works. Any thoughts?? gittleson plan 1c.plan Link to comment Share on other sites More sharing options...
bdottley Posted February 21, 2014 Share Posted February 21, 2014 I didn't have any hang up with mine. Here are my settings and picture of the RT. Link to comment Share on other sites More sharing options...
JasonParsons Posted February 21, 2014 Author Share Posted February 21, 2014 Try checking compute caustics. I had that checked. Thanks! Link to comment Share on other sites More sharing options...
bdottley Posted February 21, 2014 Share Posted February 21, 2014 Sure enough, did the same thing you described. Seems to be beyond my scope of knowledge, hopefully someone will be able to step in and help. Link to comment Share on other sites More sharing options...
KirkClemons Posted February 21, 2014 Share Posted February 21, 2014 This does not appear to be related to the stone materials. I replaced all the stone materials I could find and reproduced the same problem. My guess is there is something in the plan that is hanging up on caustics. You won't really see them in an outdoor scene anyway so no loss in quality if you turn them off for now. I would do a backup entire plan and open a new support center ticket and include your system information as well. Link to comment Share on other sites More sharing options...
JasonParsons Posted February 21, 2014 Author Share Posted February 21, 2014 I will Kirk. The reason I suggested it was the stone, is because I raytraced this project, then added the stone and had the issue. On another plan, I was able to sub a different stone and get it to work. The Caustics come up when you run the wizard on high quality outside, so I have always left them there. Thanks! Link to comment Share on other sites More sharing options...
KirkClemons Posted February 21, 2014 Share Posted February 21, 2014 No worries. I have yet to reproduce any lock up using the default hight quality settings when using these materials except when I am in your plan. So the backup entire plan should ensure that we get all of the data in your file and the system info will help give us an idea of the environment we are dealing with. Link to comment Share on other sites More sharing options...
DRAWZILLA Posted February 21, 2014 Share Posted February 21, 2014 I always use the cultured stone catalog and not having any problems, and they also have patterns included Link to comment Share on other sites More sharing options...
mscpbd Posted April 29, 2014 Share Posted April 29, 2014 I've not had any problem with a raytrace using stone. I changed a grass texture to one I had found (seamless) and that seems to be the beginning of my problem. I didn't put two and two together until I read a few other posts. I have had to go into the settings and turn off caustics under photon mapping because the raytraces started hanging up at 91%. Before I added that texture, I could run a raytrace with the above checked... I guess it was just to much to handle. Debra Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now