Larry_Sweeney Posted July 18, 2014 Share Posted July 18, 2014 I have two roof planes that will not connect. As far as I can tell everything is the same. The small roof on the gable end doesn't "connect" at either corner. ("B" in attachment) Also a section to the shadow board is sticking through the roof. ("A" in attachment) This only sticks through the roof on one side of the gable end. I deleted surfaces to try and see why or what was sticking out and noticed there is only a short section of this molding. (?) I've been frigging with this problem way too long and am getting nowhere. It's probably something simple I'm missing, but I need a new set of eyes (brain) looking at it------mine is fried. I attached the plan if anyone wants to take a gander at my problem. Thank you. BERLIN REAR PORCH.zip Link to comment Share on other sites More sharing options...
AlwaysEastern Posted July 18, 2014 Share Posted July 18, 2014 Sorry Larry, I gave it a shot... Couldn't find anything wrong. Link to comment Share on other sites More sharing options...
Mark3D Posted July 18, 2014 Share Posted July 18, 2014 I got it working but you need to check i have not messed your model up as was moving things all over the place trying to get it working https://www.dropbox.com/sh/w2lpvsyehfw4tpm/AADbgc4m_jQsSX3-v3lFLrpFa Link to comment Share on other sites More sharing options...
Larry_Sweeney Posted July 18, 2014 Author Share Posted July 18, 2014 Bill....... I finally got my corners to connect, but I still have the bed moulding projecting through the roof on the left side of the gable. There is no projection of a bed moulding on the right side. I did/do have "EAVE ONLY" marked, but the molding still shows. I'm not sure what is different between your changes to eliminate this moulding through the roof and what I have. I'm sending along my revised plans with the corners connected and my bed moulding projecting for the roof. There must still be something different. Thanks for taking the time. It's always very much appreciated. Mark....Thanks for taking the time. I looked at and studied your suggestions. I see you changed the pitch to get the connections and also some of the overhang distances. This morning. when I got up to the computer, I completely rebuilt the short roof on the gable end and then they connected. I did this last night also, but it didn't connect then. As I mentioned above to Bill, I still have the moulding projecting through the roof. I'm sure we'll get the problem solved. Thank you again. Have a great day. BERLIN REAR PORCH 07192014.zip Link to comment Share on other sites More sharing options...
Larry_Sweeney Posted July 18, 2014 Author Share Posted July 18, 2014 Bill......Thank you so much. It's the "little things" that can drive me up a wall sometimes. Your time, help and advice are much appreciated. Have a great day! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now