BFogarty Posted January 28, 2017 Share Posted January 28, 2017 Hi There! Looking to create a vanity with a wrap around the base as in the pic. Was able to get everything else done but this, haven't been able to find a solution anywhere....help! Any thoughts are appreciated....Thx! Using X9 Bath Vanity.plan Link to comment Share on other sites More sharing options...
Kenoeightspot Posted January 28, 2017 Share Posted January 28, 2017 Remove toe kick, raise bottom of cabinet back up . Add polyline solid shapes around toe kick area.. Second image has feet from the Lib. Link to comment Share on other sites More sharing options...
BFogarty Posted January 28, 2017 Author Share Posted January 28, 2017 Oh OK. Just wasn't sure if this was something that could be done within the cabinet dbx. Thx Link to comment Share on other sites More sharing options...
MarkMc Posted January 28, 2017 Share Posted January 28, 2017 On 1/28/2017 at 1:39 AM, BFogarty said: Just wasn't sure if this was something that could be done within the cabinet dbx. Expand You can use feet as William has done and then add a molding to tie them together-bit of a pain to line everything up (vanity on left) Creates extra lines in vector views. Easiest is to grab a valance (Huntwood has a good selection)-copy to user library and add in stretch plane. Then drop them in the plan. (vanity on right) Link to comment Share on other sites More sharing options...
BFogarty Posted January 28, 2017 Author Share Posted January 28, 2017 On 1/28/2017 at 1:30 PM, MarkMc said: You can use feet as William has done and then add a molding to tie them together-bit of a pain to line everything up (vanity on left) Creates extra lines in vector views. Easiest is to grab a valance (Huntwood has a good selection)-copy to user library and add in stretch plane. Then drop them in the plan. (vanity on right) Expand I like the idea on the right. Is there a way to lock to molding to the cabinet so it's permanently attached? Thx Link to comment Share on other sites More sharing options...
MarkMc Posted January 28, 2017 Share Posted January 28, 2017 Bob- plan attached with both those options and a third with loose valances and the cabinet blocked. If you need to get the valances into a cabinet schedule that is a different issue. I just found a new way to do that which makes me happy-posted over in the tips section. 1 Link to comment Share on other sites More sharing options...
BFogarty Posted January 28, 2017 Author Share Posted January 28, 2017 On 1/28/2017 at 4:40 PM, MarkMc said: Bob- plan attached with both those options and a third with loose valances and the cabinet blocked. If you need to get the valances into a cabinet schedule that is a different issue. I just found a new way to do that which makes me happy-posted over in the tips section. vanity.planFetching info... Expand Got it. Thanks for taking the time to post that Mark! Appreciate it! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now