joey_martin

It sounds like you are sending a specific plan view to the layout and even though you are changing the plan and resending, you are not switching the plan view, and thus, its updating whats there. Unlink the plan view(s) or simply delete them if you aren't really using them.

Or...you want 3 different foundation options for the same floor plan, easy enough but you do need separate plan files for that. When I do these for spec builders I have the MASTER PLAN FILE_CRAWL SPACE, then save as and name it ..._BASEMENT, then ..._SLAB and send those separate plans to the one single layout.

I would make the girder truss a symbol so that you can position it accordingly without needed to create extra ceiling planes. Open a blank plan and create the girder, turn it into a symbol if you can and bring it into your plan.

Just delete them in layout.

You can use a reference set that references the as-built plan. 

What company?

Where are you located?

I use a match line....

Don't use a library door, just use the door tool.

1/4" for me. Will use the 1/8" for those pesky pre-cut studs (@genedavis  ) on my elevations, but 1/4" everywhere else possible.

Check the setting of the sub-fascia. If it's larger than the fascia it will push the wall down accordingly. 

Just start drawing. Connect them with a slab "room" so that you can more easily control some heights and floor drops. Other than that, just get started.

Sounds like you have changed the location of where you stored those, or you are using a different computer to finish up a project. You simply need to relink those and your good. This happens when I am working on a project in the office but come home and work on it with my laptop. Your post sounds like you are panicking a bit, but it's all still there, just needs re-linked.

There are both 3D & 2D symbols in the Simpson Catalog.

https://www.chiefarchitect.com/3d-library/index.php?r=site/library&reset=true

Bumping this up for the new year. Shoot me an email and I will send you the info.

 Go to the foundation defaults and check this box so that the slab sits against the 4" top part of the pony wall..

Set the roof to set on the wall at 59"

Chief is not "CAD", those DWG/DXF files are basically good for nothing in many instances with Chief.

10 minutes ago, zachrhcks said:

27 minutes ago, richoffan said:

 

Ok that worked but how would I set the height of that knee wall? It’s grayed out and won’t let me adjust the height.

Chief doesn't set wall heights, walls are controlled by the room ceiling height, or by the height of the rafters it butting up against. 

No "wall height" adjustments in Chief....Room Heights.

3 hours ago, richoffan said:

has a building department ever changed their interpretation of a restriction in the code?

Oh the stories I could tell about this one!!

It's just a wall. Draw the roof plane and the wall will stop at the underside of the roof.

3 hours ago, Kbird1 said:

Chevrolet next week saying I can no longer sell it because come Jan.

Apples & Oranges

18 hours ago, Michael_Gia said:

I’ve payed close to $10,000 CAD, and I’m not allowed to sell the product that belongs to me to recoup some of that?

Are you saying that over the last 7 years or so since X7 that you haven't already re-coupled that investment in the form of fee's collected? I don't believe that for one minute. 

Also, I believe in the EULA that it states that you may own the software, but Chief owns the license to use and that's what you are paying for. Something along those lines.

Re-save it to the library in your own folder and set the name, layer, etc. Next time you need it, pull it from your library.

59 minutes ago, lbuttery said:

I feel screwed out of $2,500 by CA and I'm not happy about it

Are you saying that over 20 years you haven't recovered your investment in the software? I find that very, very hard to believe.

9 hours ago, HumbleChief said:

the price for SSA will go up in the future

So will the price of eggs. Point?

22 minutes ago, PlanX_Designs said:

the SSA annual fee is just a discount for upgrade to the next Version.

That is what it is. Support is the first word in the title, but it's a small part of what the program is...in fact, it's a tiny part. Everyone gets support if they have purchased they license from a legitimate source, but SSA members get Priority Support. But we also get libraries that others are paying for individually, upgrades, and discounts. Over the years I have seen many users skip the SSA because "they don't use support", which is 100% irrelevant to the program.