mtldesigns

Jeff,

Have your tried putting a shed room over this bump out?  It will have its own roof plane.  I wouldn't pull the wall down either, let it ride free.  When you set a roof plane, right above the windows (as you mentioned), the walls will come down on their own.       

BTW, cannot open that path.  But that's ok, I don't need the file.  

6 hours ago, Maddeejewels said:

just appears as glowing orbs over the light fixtures

I have seen this before, but usually when I am using my PBR camera and go from the outside to the interior.  For some reason the foster-grant lenses don't readjust from sun light to room light.  What I have done though once your back inside, is go back to standard camera, move your viewpoint just a tad.. to the system to readjust to the light, then switch back to PBR.  If still an issue, turn off the sunlight..  which in my opinion shouldn't be a work around, but it is.  

Thanks Michael, looks like I was thinking the same as you.  For this particular client, I have done a half dozen custom homes for this guy, including his own residence.  I would consider him as a friend too, so I did a half price.  Now another builder, not as close, so I will be doing a little more different.  Lost money, IMO, on his designs, and I know he will be building the same houses again because he's bought the lot for them already.  I will probably add a little to make up the difference, but not the same price.    

You all are in the biz, so have ideas and I'd like some input.  Working with a builder whom I did a house for a couple years ago.  He wants to build an exact duplicate.  Only thing that changes is the site plan.. address, setbacks, etc..  easy breezy.. What do you all charge?  Some kinda of Home Plan Magazine Rate..    

need to make that room behind the door a "open below" room in the room specification dbx.  Its one you can pick from the dropdown.  

Ah.. cut them, so I won't have duplicate.  Got it, thanks Glenn.  Just in time, still have 1.5 floors of decking to do.  

Is there a way to look at the deck framing on the floor I am on?  I am think probably not, but need to ask.  Chief is probably thinking this is ceiling framing for floor below, even though that's unchecked.  When you are level 2 (for example), and you adjust the railing it's for that floor but when you turn the framing on, its for the floor above.  So after you adjust a railing, you have to go to the floor below to adjust framing.  Talk about confusing and crowded trying to line things up, framing layers on, reference displays on, etc. 

Thanks in advance

I've had more issues with getting quality views than I did designing the house.  Walls that glow, doors that are black, white tile showing silver, just to name a few. 

To get the views that I need for this project, I'd like to stay with PBR.  So here is my question, the 3 views attached (camera, PBR and RT) are from an exterior pool shower, under deck (house on 15' pilings).  When I PBR, my door is black, why?  I have one light out here and it has been on and off, with the same result.  The sun lums are set 75k, sun follows camera.  There isn't anything black that its pulling from.  Also, this is a beach house, so taking a night view to get the white trim is kinda dumb IMO.  And when I try and run as a RT, the white tile turns silver (this view was stopped after 4 passes on why its grainy)??         

Curious, why does PBR work better at night anyways?  That has never made sense.  My gray walls in my home look gray in the daylight and at night, so why can't PBR be just as simple. It seems like the only way to correct PBR issues is to toggle sunlight, which is not right, because sun light and its shadows add to a view.      

The last pict, BATH 1-3 is from just inside that shower.. all white, PBR.  

Chief already has wall defs for ICF.  I just used them and they worked great. They have 4 I believe already.. one with the core and insul all the main layer, then others with stucco, siding, drywall.

16 minutes ago, Chopsaw said:

Or make your existing window a frameless passthrough and fill the hole with p-solids.

You might be onto something here.  So you thing filling the void with a material region might work?  So I can set the definitions of the wall layers?  I'm going to try... stay tuned..

..nope.. just will poly this with diff layers for the materials.  

Hey Chiefer's...

I have a existing 8" CMU wall with windows that will be filled in with wood frame and drywall.  This wall is now a interior wall.  How do you go about doing this, and maintaining the openings for construction docs and details?  

It is on D, now. But to gain C drive space, I had to removed DB.  Even though DB is on the cloud, if you have it linked and have it accessible via file explorer, it took most of my drive space.  I was unlinking, linking, it got to be a PITA, so I deleted it and I upload those daily projects every night.  The explorer def made that part easy, automatic per say.

So Charles, you only have the one drive and not a dual, a C and a D?      

On 3/25/2021 at 9:44 PM, CharlesVolz said:

$3,118 before tax and free shipping

Not a bad price for a new rig.  I think I paid a little less than that for my Alien about 3 years ago.  I love this machine, doesn't give any issues (knock on wood) like my HP did.

My only regret was not having a bigger C drive.  I have a 230 Gig and gets max'd out very quickly.  Always cleaning out the archives, and had to unlink Dropbox.  Anyways D drive is great, 2TB.  I am waiting to see how this runs with 13.  still thought $3200 +/- is very decent, and a write off.   

3 hours ago, Northriver said:

Call the company up and ask for the testing information

Nudura had all the testing data and that was presented.  And as of yesterday, the permit was signed.  

Thanks for all the help gents.  I have a new client in the same neighborhood, and even though its not a duplex, its close to neighbors homes and wood framed.  Lesson learned form this and all your advice.

I didn't think so, but the masonry min. had me thinking.   

I attached the detail with my added notes.. this is what I re-submitted last night.

10 hours ago, robdyck said:

It doesn't!

8 hours ago, joey_martin said:

New guy in the office or first time dealing with an ICF?

8 hours ago, rlackore said:

No. Isn't Florida's residential code based on the IRC? Referring the local officials to R302.3, and providing the Nudura details and listed details, should be sufficient to make your case. 

Thank you all for your input.  I wrote this inspector a nice long email last night, after I summitted this question to you guys.  The Nudura 6" core is a 4 hour rating, all by itself.  I highlighted the Type X callouts with a border around that text on the Nudura details.  And asked in this email why TWO layers of this X was needed.  I can see maybe a stud wall, but a concrete core wall, scratching my head.  However, I did not add any Type X under the exterior lap siding, but did add on the interior of the north and south walls.  That wall is also a 4 hour wall.  We resubmitted last night along with my email.  Waiting for their response.    

8 hours ago, rlackore said:

Note #4 only requires 1/2" type-x; if you're not using the 1/2" type-x, then you can use 1" of a concrete masonry product.

Could Hardie board be considered the concrete exterior?  Its cement based...

Like Glenn said, most likely the floor levels are not the same, can't imagine you'd have a bifold on an exterior wall.  Also, check to see if the door floor to bottom is set at 0" on the door dbx (General Tab)

I have a ICF build duplex going through the permitting phase, and it keeps getting kicked back because of the firewall.  I am wits end on this. We are using Nudura 6" blocks and they provided the nice Fire Wall Details, that I attached to my layout sheet.  The building department wants us to double the Type "X" board on the firewall itself (that separates the units).  AND double on the north/south exterior walls, since we are less than 10' from the nearest structure.  YES, they want double X under the lap siding.  I have never ever heard of such a thing.  Does this make sense to anyone? 

I attached a couple of the details, but here is the the link to these and more firewall details from Nudura, if anyone is interested

https://www.nudura.com/resources/design-library/fire-wall/  

fw6d2b.pdf

fw6d3.pdf

1 hour ago, Chopsaw said:

so it works predictably

I had to give you a upvote Chop.. didn't like the (3) 6's on your reputation.  Plus, you always have great advice. 

4 hours ago, DianeP said:

as I can't  seem to get one of them to become 3 way when I connect two or more separate switches to the same light

See if I'm understanding, maybe I am not.  You are using a standard switch, but when you connect more than one switch to that circuit, it does not update to a 3-way, or 4way?  If this is the case, make sure the switch dbx has automatically chance switch type when wiring checked.  That's the first thing I'd look at.

My clients like these as well, but like you said Rob, it clutters.  So on every floor layout sheet I give then a room schedule, showing; Room Name, Area and Room Dimensions.  This unclutters the plan for more important items.  Going this route, all I need on the plan is the Room Label.

Or, you had this defined as a bedroom, deleted a section of wall where it was no longer a room.. but the label stayed. (has happened to me).  The when you created the room again, a new label came in.  Delete both labels, and check that room DBX.  The other way is they way Chop explained.  Create a room schedule, and find it via that.

40 minutes ago, RobUSMC said:

3 projects on the back burner....LOL.    Try 27 right now so yes time is precious to say the least.

Nice to be busy huh..  3 is the max for me.. one man show.. plus 40 hour job elsewhere.  Keep up the good work Rob.. that's why you have a nice backlog.

46 minutes ago, CADustin said:

There's a lot of material options under the "Material and Surfaces" section.

Thanks Dustin... I do use these.  Was thinking about the grains that Rob was asking...

8 hours ago, RobUSMC said:

Walnut, white oak, knotty alder, etc. Does anyone have any they could share?  Thank you a lot

5 hours ago, CADustin said:

Hit me up if you don't find what you need and I'll get it on the update list.

6 hours ago, Chopsaw said:

Have you checked out Chief's Substance Player ?

This probably should be a suggestion... and maybe I will put one in...

But what's the possibility of a creating a Chief Architect Catalog of downloadable textures as in what Rob is asking?  As well as other textures and to be used for Bump Maps?  Time is money, and it seams like there's always 3 jobs on the back burner, so spending time trying to create textures, find textures could be used more wisely.  We sure don't need another Cabinet Catalog.  Us Chief users could really use something like this, and appreciate it even more.    

It always seems a "no def" wall doesn't do good in PBR..  or it could be my settings.. who knows. Those walls always seam to glow.