i4HomeDesign

That got me where I needed to be to get it reset. Thanks.

Unfortunately when first given the option, I also chose to suppress the message option. I

First time closing a linked elevation window after installing a new version, we get the option to update view when view is closed. I am wanting to switch the option and am not able to locate where this setting is. Tried searching in program help and chieftalk and obviously I am not wording it correctly or it isn't there. Can anyone assist with this?

Mick, You are correct. Typically that is how I remedy the situation. In the mean time here I have confirmed that by updating to X16, it seems like this issue may have been rectified. I will update if I find otherwise but it may be good for anyone still on X15 that it is a known issue. Monte.

I have been making this work forever but it has become really frustrating. Have multiple workstations and every time a file is saved on one then opened on another, I have to go through and check every text box to make sure there is not incorrect formatting on it. Happens on both the layout file and the plan file. Seems to only be a rich text thing but boy is it ever annoying and so time consuming... Any one else experience this and is there a chance anyone has a solution?

I am not wanting it to update. That is the whole point. I know I can force it to update again, but I want it to stay the way I updated it. Thank you thought.

This potential could result in excessive amount of rework or time required to deal with this change. I have sent the videos included into tech support so ignore the comments at the end about me asking if they need files. Has anyone else experienced this? Opening old files in X10 Desire to make revisions to a plan. So I save new layout, and relink to new plan I will be working on. Only minor revisions needed so I am not wanting to update every single camera... X10 didn't automatically update. See in video. Line stays in same spot after relinked to the new file. Opening old files in X11. Trying to make the same minor revisions now in X11, I all of a sudden have to go and do cleanup work to every live camera sent to layout because edited lines do not stay edited. Chief SSA told me that this always happened, and it is because the camera has a new ID. Not the case as shown in the X10 version. Video is a very basic model. Only trying to convey how edited lines move. Hopefully it isn't to distracting for those that understand what I am asking. ANYONE RUN INTO SIMILAR ISSUES? WHAT AM I MISSING? Chief_Architect_Premier_X10_2019-04-10_11-58-10.mp4 Chief_Architect_Premier_X11_2019-04-10_12-02-00.mp4

I have been struggling with this same issue of automatically created break points on roof. Following this thread in case we hear of any solution.

This is now password protected. Says it is free on your chieftutor.com sight as well. But no longer available?

Thanks Levis, You are correct that one was in 3d warehouse. Thanks though.

I was wondering if anyone knows of a good place to find some 3d models of recreational vehicles. I have already check 3d Warehouse and it really is quite limited. Needing to find a variety of units as I am working on laying out an RV park. http://www.turbosquid.com/3d-models/campers-2009-2011-3d-model/729689 I have found this site, but have not idea how they render in chief. They look to be images plastered on.... Anyone have experience with model from that site? Any one have models they can share? Thanks in advance for any assistance.

I just tried to download the james hardie library from chief and I can not find it.. I wonder if they deleted it to fix this or if I missed out....

I assume the library browser constantly disappearing is not fixed yet as it has been and is still happening to me.... Anyone know of a fix or is it just wait for Chief to solve it? I have saved a link to a video showing it happening... everytime I click on another monitor window it resets the library browser to the bottom. https://www.dropbox.com/s/thm3bto5dt7vq6p/clip0015.avi?dl=0

Same issues here. Thanks for getting right on this and letting us know it is not just us.

I have already sent to support and they were able to reproduce it. They had not heard of it happening before so I figured I would check to see if I was the only one. Turns out I am not. At least one other person....

Perry, Maybe I just woke up on the wrong side of the bed today but I am tired of chasing silly dimensions lines way off screen. I have done the exact same thing you are talking about for years... I can't help but wonder, 'There must be a better way." Anyone else have a possible solution rather than us continuing to hit our heads against a wall?

This issue has happened fairly frequently so I would be a little surprised if no one else has experienced it. I go to snap a line on cross section and it ends up putting a dimension point way off screen. This is very frustrating. I have included a dropbox link to a video I took of it happening if you need me to send over the file let me know... https://www.dropbox.com/s/s76hc9rrc31jcx5/Dimensions%20Snapping.avi?dl=0 Am I the only one? Does anyone have an answer to fix this? Thanks.

Oh yes, it is just an symbol like the other symbols in our libraries. If you are often using the same railing it is useful to make 5 or 6 options of the railing for different stair lengths. That way you don't have to do it every time. Then by stretching and pulling you can make some prebuilt ones often fit into a plan. Glad I could help.

Alan, I am glad it worked for you. I wasn't sure if I miss understood the question or not. I find as soon as I try to line up wall underneath a railing it is hit or miss (most often miss) if it works. I have defaulted to doing it this way for a while now. Steps to create object. I used your plan (this way the stair height was already determined. I went and put that one railing on a different "Wall, Railing 2" layer. I then went to "All off" Layer set. Made sure everything was off, tweaked the rail post height from 36 to 37" so that the rail connected the post. At this point all I see in the 3d view is that one rail. (this is where I took the image of the railing that I posted. With only that railing showing I went and Tools, Symbol, Convert to Symbol option. Clicked advanced options, gave it a name and voila its in your library.

Glad you got it back.

Sorry, without the plan I don't think I am able to assist any further. This has happened to me a couple times, but I don't remember what I did to fix. Try rebooting computer? If you desire to send it to me I could see if I run into the same issue. (monte@i4homedesign.ca)

Probably obvious question but has to be asked. Are you able to save as a new plan, close chief all together and reload?

Give this a try. You can adjust the symbol as needed if the other stairs are off a bit. i4Homedesign Railing.calibz

Alan, I assume the original questions was about the wall below. This may be a round about fix but I have found that often it is easier to make a symbol of the railing and add it to the stairs. That way you can keep the wall below and have the railing independent. The problem with this is that it is some extra running around. I will try to show you what I mean I just need some time. With the plan that you sent, is that exactly the style you are desiring your railing to have?

NO. There is zero backwards compatibility. I can not even open and file saved with X6 in X5 let alone 8.0 Sorry to inform you of this.