decorators3

hi 

Here is what is happening.. all my glass doors in the library show this colored glass -  I imported the color to use on a vessel sink.  as you can see even a regular slab door with glass shows this multi colored blue.. Still cant get rid of it..

I imported it thru the define material - under Texture - I browsed my desktop and uploaded it to color the sink but I don't know how it got into every glass in my library.  

If I use  try to use standard glass in component mode nothing happens.  I have neve had this issue before .. If I go to EDIT  and reset defaults will that help??

Any help is appreciated

Thanks

Levina

thank you!

HI 

I imported a multicolored  jpg for my vessel sink to change from white .   however it changed every glass in my library to the same multi color.  How do I eliminate this

Thanks

thanks  I will check it out!

Hi  

I've attached an image of a wall with built in shelves that is at an angle with the ceiling.  Is this doable by using CAD or is there another option to achieve the angles on the top shelf?

Thanks

thank you all very much.

sorry if I was a little confusing..

I created my plan under the KITCHEN AND BATH TEMPLATE..so under the Saved plan  views control - i have the following options WORK PLAN VIEW-CONSTRUTCIN PLAN VIEW-ELECTRICAL PLAN VIEW-MECHANICAL PLAN VIEW-KITCHEN AND BATH PAN VIEW..

HOWEVER Under the residential saved plan view control I see many other options (ie) floor plan view dimensional - floor plan shell - framing etc.. These do not show up in the kitchen and bath saved plan view control.

I was asking how I can change my completed floor plan from the KB template to imperial residential template which offer more plan views

Maybe I am missing something.. anyway thanks for your reply

Hi

I have completed  a floor plan.  However I noticed in my saved plan view control that  I set it up under kitchen and bath .. Can i change it to a standard residential plan or do I have to recreate it again under the residential template

Thanks

thanks  glad I'm not the only on thinking that way

dimensions are soooo busy!!

thanks Dave. all good got it.. through edit

in my display options all dimensions are active..

..did it... still nothing

my auto interior dimensions icon in tool bar is not high lighted.  cannot access . I went into default settings.. but don't know what to look for. it's maybe simple but I cant access interior elevation views

Any help welcome.  thanks

ok,, thank you I will

I couldn't figure it out.. I t was like this for a few days. couldn't open the room specification dialogue and no icons showed on my display bar .  Don't know what happened but now it is working again  I went to edit and selected reset to defaults.  Obviously I did something but have no idea what it could have been.  I find if I touch a  key in error unknowingly it can cause havoc to what i'm working on.. but all good now

Thanks for your reply

Good Morning

I've created a house outline and have created individual rooms but my cursor it will not  open the room specification dialogue .. when my cursor is  hovered over the individual rooms its like its stuck and wont open nothing happens

Any help is appreciated

Thanks

Levina

ok.  I will do that

thanks

Hi

I have attached a floor plan showing 2 rooms

- one room has flat ceiling 10' in height

- second room has vaulted ceiling 24' height at center of ceiling

My issue is I have an invisible wall to separate the two rooms ,but when i remove remove the invisible wall section my vaulted ceiling turns to a flat ceiling

see attached floor plan

Any assistance is gratefully accepted

ceiling height issues.pdf

did I ask this question  yesterday? 

sorry if I did .. I just saw the post from someone else,,

ok got it -THANKS

Hi

I have a room 40' long by 25' wide.  How do I change the flooring direction.  When I insert my hardwood flooring it shows automatically as horizontal.( which is fine in most cases). but i want the planks to take on the length of the floor not the width

Thanks in advance

ok thanks  Ill try that

I did as you suggested but still shows as mm

Hi 

I am creating a 3D visual for a client but here is my issue

  the plans I received are in metric so I opted for the metric template BUT the roof plans are regular pitch (ie) 10:12 etc.. How do I change back and forth.  I went into Default for Roof Dimensions and opted for secondary format but pitch still shows as metric.. I AM NOT A METRIC PERSON

How can I adjust this.  Can I change my template and not lose my  information if I convert it to imperial 

Thanks in advance

Here are the two different roof specifications ( i prefer the imperial ) 

the roof plan  shows various roof planes .  hoping I can get this completed

I managed to convert my metric to imperial measures but my roof plane specification is still showing mm any suggestions

some of the roof planes are \16:12    14:12   10:12  11:12

I have attached 2 images one is standard rendering showing the flooring.. the PB render shows the flooring but not the same shade as in living room and kitchen.  I checked the flooring materials in room specification and it is all the same   ..why does it show a different shades of the same flooring??

Thanks Levina