talock

Hi Steven, Did you ever figure out why your elevation spline was in segments? I was working a plan using the elevation spline to draw the topo and it stated segmenting my spline. I did three separate spline lines and on the fourth it stated segmenting the spline. Any ideas?

Hello WhistlerBuilder, after using the hole in terrain tool how/where did you enter the elevation data? My project has the terrain is one floor one and the parking garage is on floor zero. Because of that I have not been able to figure how to get the elevation data to work as there is not terrain on floor 0. I would appreciate any insight to this. Thank you!

Hello, I'm curious if anyone is running an AMD Radeon RX 6700 XT GPU with Chief X13? If so do you have any issues with it and physical based ray tracing?

Bruce From your 2d drawing make a full perspective overview, from your camera view. Then go to your rendering techniques button and choose "physically based (ray Trace)" That's it. Mine works great until I start rotating or zooming in...it will then white out!, let me know how yours works.

You guys were correct I had a terrain elevation region I was working with. I had drug it outside the terrain perimeter and forgot about it. It now works at least as well as did prior too. Lesson learned! Thanks again!

Thank you solver! I will try delting the drive and let everyone know what I discover.

ok, I apprciate you looking it over Chopsaw! I'll look into DBX settings you suggested as well as the driveway outside the terrain. Thanks!

Chopsaw, Thanks for your reply! I have attached the plan file. Please understand I am a novice at this and its still a work in progress. I have walls that do not line up from floor to floor, and my wall heights are incorrect both basement and the main floor need to 9' not 8' etc etc.. but I appreciate you looking at it. It seems odd that x11 can do it and x6 cant? 23106 0 1 2 3 A Levels from rendering plan.plan

ok thanks Ino-DEC, I'll look into that and post what I find.

I am getting very glitchy renderings from my Chief Architect X6. I have tried to figure this out but to no avail. Since I have a trial copy of X11 on my computer, I opened the exact same file in X11 where it works perfectly. I have attached two screen shoots from my copy of X6 and one in my trial version of X11. If any of you guys can help with this, I'd greatly appreciate it! Thank you! Todd 23106 0 1 2 3 A Levels from rendering plan-Perspective Floor Overview Image.pdf 23106 0 1 2 3 A Levels B from rendering plan-Perspective Floor Overview Image.pdf

Hi Kevin, Yes unfortunately you are correct about 5+ years old. Thanks for the advice I may end up doing just that. Todd

This what I found on my cards: DisplayPort 1.2 Max resolution: 2560x1600 per display Multi-Stream Transport 21.6 Gbps bandwidth High bit-rate audio HDMI® (With 3D, Deep Color and x.v.Color™) Max resolution: 1920x1200 Dual-link DVI with HDCP Max resolution: 2560x1600 VGA Max resolution: 2048x1536 Unfortunately the montior I'm looking at is 3440 X 1440, LG 34UC80-B 34-Inch 21:9 Curved UltraWide. Although I have not made my mind completly, as you know I have to put the whole puzzle togherther to see what else may need to be upgraded...what size of worms am I jumping into here? https://www.amazon.com/dp/B074JKT894/ref=cm_wl_huc_continue

Kbird1, The purpose of upgrading my GPU(s) was I want to use a larger monitor and my two 6900s do not support a monitor that size. Also later this year, or next, I intend to upgrade to X11 or the subsequent X12. as you mentioned when you upgrade the GPU you may need to upgrade your motherboard excetera excetera kind of the rabbit hole I'm trying to avoid if possible but it may be unavoidable. As a side note that free upgrade copy of Windows 10 I may end up having to purchase if I switch out the motherboard. I will definitely re-post my original post on this as you suggested to the link you provided, that will be helpful! Thanks for your help I'll keep you updated and may have another qustion or two for you if you don't mind? Thank you, Todd

...and yes cost matters maybe mid to mid high range, Thanks! Todd

Hello, I wanted to upgrade my two 20" monitors to a single 34" monitor until I realized my two AMD Radeon HD 6900 Series cards don't support that monitor. My system is as follows: Processor Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, 3401 Mhz, 4 Core(s), 8 Logical Processor(s) OS Name Microsoft Windows 10 Pro Version 10.0.17763 Build 17763 System Type x64-based PC BaseBoard Product P8P67 DELUXE BaseBoard Version Rev 1.xx Installed Physical Memory (RAM) 16.0 GB Total Virtual Memory 32.0 GB My question is what card or cards would work best to run Chief x6 (and later the new version) on my system which I imagine is an old school system by now, but is what I've got. Thank you! Todd