-
Posts
345 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by buzzsaw204
-
-
-
hi,
i was looking at a sample plan in the CA Gallery.
The....
AIBD 1st Place
Working Drawings
- Martin Drafting & DesignPDF plan.
this plan have couple of CAD features that i been wanting to use.
im just wondering if these are in CA automatically or manually drawn in with CAD.
1. Section Marker with a tail
2. Floor Joist hanger drawn in plan view.
-
They can be deleted from your User Library if you created them.
i didnt create them. they are CA stock lines.
-
-
-
hi all,
is there a setting to override the actual dimensioning?
sometime i would like use the dimension line, ticks, and arrow, but would like to override the measure it placed and type in my own notes.
vs.
-
hi,
i've been drawing Tray Ceiling using the old method of creating Polyline Solid and Hold in Polyline.
X6 has a the feature of auto creating ceiling tray.
heres what i can find in the Reference Manual p337.....
----------------------------------------------------------
Tray CeilingsA tray ceiling is flat in the center and slopedaround the perimeter, and is easily createdusing the underside of roof planes above.To create an automatic tray ceiling1. In the Room Specification dialog, makesure that Ceiling Over this Room ischecked, then specify the desired heightof the walls as the Ceiling Height. See“Structure Panel” on page 342.2. Make sure that Auto Rebuild Roofs isunchecked, then build the roof. See“Build Roof Dialog” on page 462.3. Change the Ceiling Height of the roomto the desired height of the flat ceilingsurface in its center.----------------------------------------------------------is there more to this instruction??? -
-
i often uses Corner Boards function.
when using it in a low pitch gable end roof, i can pull up the Boards up far enough to hide behind the facia and it doesnt show thru the roof.
but on a hight slope pitch roof, when you pull it that high, to hide the board under the facia, it will poke thru on the roof.
is there anyway to trim or edit the CB or any other method of drawing Corner Boards??
thanks,
vs
-
-
Check out Scott's Video on double studs in a wall.
Where can I find Scott's video?
-
-
i cant seem to figure out how to print to Landscape on my printer, in Mac OSX
i have a HP DesignJet 130, that can print 24"wide with the paper on the roll.
the setting i want is to print is 24 x 18", Landscape, which utilizes the 24" wide paper roll and would be cutting the sheet @ 18" long.
my Layout is set up 24x18 Landscape and i have my Print Setting to Lanscape
but when it prints, it keep printing Portrait, 18" wide and 24" long
-
-
-
-
-
In/out Double Door
in General Q & A
Posted
i DON'T want Single door, double swinging direction.
i want 2 doors (storm door, o/s & wood door i/s) like what you have in your photo.
is there a setting for that type of door? or did you manually draw it?