chief58 Posted August 13, 2014 Share Posted August 13, 2014 Looking for an exterior door with sidelites on each side and a rectangular transom above, can't seem to find it in the chief lib. and was wondering if anyone had one or could tell me where to find one Thanks Link to comment Share on other sites More sharing options...
Joe_Carrick Posted August 13, 2014 Share Posted August 13, 2014 Chief has some separate sidelights - I don't remember off hand if they'te in the Core, Bonus or Mfr Librarie - which can be place with the Door and a Window above an mulled together to form a single unit. Link to comment Share on other sites More sharing options...
chief58 Posted August 13, 2014 Author Share Posted August 13, 2014 Joe can't find just a sidelite so I can put a window above and if I use a window and adjust the sash I can't get a raised panel in the sidelite, any of the bonus lib that have a door with 2 sidelites on them doesn't have a transom above and when adding a window for the transom it won't mull together. I was hoping Chief would have such a common door configuration in there lib. I even tried 3d warehouse with no luck Link to comment Share on other sites More sharing options...
tommy1 Posted August 13, 2014 Share Posted August 13, 2014 Why don't you just make the sidelites yourself using doors or windows. I do it all the time. Just mull them. Link to comment Share on other sites More sharing options...
Joe_Carrick Posted August 13, 2014 Share Posted August 13, 2014 Joe can't find just a sidelite so I can put a window above and if I use a window and adjust the sash I can't get a raised panel in the sidelite, any of the bonus lib that have a door with 2 sidelites on them doesn't have a transom above and when adding a window for the transom it won't mull together. I was hoping Chief would have such a common door configuration in there lib. I even tried 3d warehouse with no luck Mull the Door and Sidelights first. Then make sure the edges of the transom are aligned with the edges of the sidelights and mull those together. Chief simply requires that the heights match for side by side and that the widths match for vertical mulling. Link to comment Share on other sites More sharing options...
chief58 Posted August 13, 2014 Author Share Posted August 13, 2014 ok after all that time Joe you had it, in the core catalog, under doors and doorways, then entryways it has with transoms rectangular and there is a bunch with single and double sidelites with transoms above. Tommy I did make the sidelites and when you make them out of windows you don't get the raised panel below the glass, when i used a door that had a single raised panel below when I adjusted the size to 14" couldn't get the sash to adjust so that the window was wider Link to comment Share on other sites More sharing options...
Larry_Sweeney Posted August 15, 2014 Share Posted August 15, 2014 Ray..........I just read your post so I'm not sure if you are still interested in a door unit with sidelites, rect. transom, but I'll send it out anyway. I had this in a model I did a few years back so I just took the wall that had the door unit in it and put it in a new plan rather than make it a symbol. You can unblock it and play around with the size. door.zip Link to comment Share on other sites More sharing options...
chief58 Posted August 15, 2014 Author Share Posted August 15, 2014 Thanks Larry I take a look Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now